Thanks for that. As soon as I put in those commands all the routes came up.

Thanks again.

I have a Mikrotik communicating with a Cisco L3 switch via OSPF. The same switch is also running EIGRP. How do I get the two routing protocols to share routes. On the Cisco I have so far I have router eigrp XXX3 redistribute ospf 1313 ! ! ! router ospf XXX1 redistribute eigrp 1313 Is there any thing...

In looking at your graph, is the link up except for the large -80dB + dip or is it dying when the signal drops 10 to 12dB? Yes the link is up except for the dip. And that dip is very unusual, normaly the RSSI is consistant for days on end. That is why I'm sort of ruling out interference, because th...

I have a 13 mile P2P wireless link using R532 board with XR5 cards on both ends. The link is very strong and is a very good and solid link, with a few exceptions. Twice now the link disconnected and stayed disconnected for a few hours at a time. I've attached pictures of the RSSI logs on the links b...

How does media relay work? Does it run on a stand alone applicance or is it software?

Do anyone know if it's possible to cache live streaming media? (eg. TV or Radio streams)

Have you ever gotten this to work?

Try and change http 1.1 settins in IE. ( Tools > Internet options > Advance ) .
Try with both settings enabled or both disabled.

Make sure under the wire links on both you have on the WDS tab -- Dynamic and bridge 1 selected. Also have one radio station wds for type and the other ap bridge. If I do this then I don't have a Nstreme link anymore. Can I have both WDS and Nstreme enabled and if yes, is their and advantage to it?

In the RouterOS manual they give an example to make a point-to-point Nstreme link. What they don’t explain is how to transparently bridge Ethernet traffic trough the radio, similar to the scenario described in this link, http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks. I’ve tried to ...