Use HWTC for 48575443, so run (use ASCII)
Also need to set PON_VENDOR_ID More info in Anime4000 repo: https://github.com/Anime4000/RTL960x/bl ... md#gpon_sn

I bought an Xpon dfp-34x-2c2 and here in Brazil I need to send the serial number in Hexadecimal format to the OLT. However, the Xpon dfp-34x-2c2 only allows you to put it in HWTCA1B2C3D4 format. When putting in Hex, do not enter the last 4 characters in Hex, leaving 48575443A1B2. Is there any way t...

Why wifiwave2 is not compatible with the LTE versions of the hAP ac³, but it is compatible with the Audience LTE6 kit, which has the same processor and amount of RAM? is it a storage size problem?

I just added the following g_ether module config into /etc/modprobe.d/g_ether.conf: options g_ether idVendor=0x05ac idProduct=0x1402 iProduct=Pi0 iManufacturer=Raspberry ...and a new interface named "lte1" appeared on my router after RPi rebooted. this worked great! I assigned the IP addr...

Bad news, it doesn't work, I can obtain a link ok in the module only if I disable speed auto-negotiation, and still can't ping or ssh to the GPON. hugomon Try ip-scan to see if anything responds... [admin@MikroTik] > tool ip-scan interface=sfp1 address-range=192.168.1.0/24 Flags: D - dhcp ADDRESS M...

Hi, I have problems with my ONT Alcatel-Lucent O-010S-P, I can't even connect by SSH. I have tried 192.168.1.10, among others, but there is no ping. Does anyone know this model, and if it is compatible? hugomon My model ONT G-010S-P responds to pings in Mikrotik. Please check my steps. 1. Assign sf...

Hi, I have problems with my ONT Alcatel-Lucent O-010S-P, I can't even connect by SSH. I have tried 192.168.1.10, among others, but there is no ping. Does anyone know this model, and if it is compatible? hugomon My model ONT G-010S-P responds to pings in Mikrotik. Please check my steps. 1. Assign sf...

Hi, I have problems with my ONT Alcatel-Lucent O-010S-P, I can't even connect by SSH. I have tried 192.168.1.10, among others, but there is no ping.
Does anyone know this model, and if it is compatible?