MikroTik

reza.mnp

hi i install active directory and Microsoft sccm for remote os deployment. when i use cisco router and use ip helper for DHCP relay, DHCP and bootp pxe protocol ok. when i use dhcp relay in mikrotik, dhcp relay is ok but pxe boot not ok. in cisco: 200.60(active directory), 200.63(sccm) interface vla...

reza.mnp

add check-gateway=ping distance=1 gateway=46.10.10.1,10.201.1.1 routing-mark=newmark i want when bandwidth of link 46.10.10.1 is full add bandwidth 10.201.1.1 problem : fix the priority 1: 46.10.10.1 and 2: 10.201.1.1 and no changed priority in any case. like : 1: 10.201.1.1 and 2: 46.10.10.1

reza.mnp

i want create a ptp link with SEXTANT G 5HPnD and 13km distance.
is it possible?
frequency interference = clean
LOS = very good
max bandwith=?

thanx alot

reza.mnp

i want install two sextant radio antenna for 5km distance.
one of the tower is (100m+20m for power building) and we install radio antenna on 100m height (for observation Frensel Zone).
i can not install a box on the tower body.

problem:

Did you work on this project will POE ?

and your offer

reza.mnp

future request

mesh protocol on mikrotik device support nv2 protocol.

reza.mnp

We're hoping to version 6 (IDS/IPS)
http://forum.mikrotik.com/viewtopic.php?f=2&t=62437

reza.mnp

with currently filter rule in ROS can detect and prevent some of attack like DOS and DDOS
http://forum.mikrotik.com/viewtopic.php?f=2&t=54607

i suggest add new future for detect and prevent malware and suspicious traffic and ... with pattern like snort database.

reza.mnp

When IDS/IPS modules (snort , psad ,fwsnort or ..) will be added to ROS?

reza.mnp

What is the problem the following script?

 :for i from=1 to=1500  do={ /tool user-manager log remove number=$i; }

run but no delete log file

usermanager v4.17

reza.mnp

OmniTik to OmniTik will work at ? Km?
and ? mbps?

reza.mnp

i configure 2 omnitik with bridge and mesh (two omnitik mode=ap-bridge)
maximum bandwidth test on udp = 40mbps

mode= AP-bridge
channel width= MHz
frequency = 6000 (super channel)
authentication - mode = WPA2-PSK (aes ccm)
distance = 10m

and mesh not support nv2.

reza.mnp

in proxylizer:
HIT/MISS ratio : 0 %
whats problem?

reza.mnp

Strange problem on DHCP-server
ver 5.8 (latest)
this problem only one vlan.

reza.mnp

I configure mesh and hmwp+ on 3 OmniTIKU-5HnD Mode : ap-bridge Wireless protocol :any band : 5GHz-only-N channel Width : 20/40MHz HT Above SSID : wds HT Tx and Rx channel : tik all Ht guard interval long and tik all 0-7 on the HT AMPDu when configure with NV2 disconnect all connection on mesh proble...

reza.mnp

the picture shown building 70M*15M contain 100 room in 4 floor.
1-best solution (outdoor) for coverage all room with Mikrotik AP ?
2-best routerboard and radio and antenna for this solution(2.4 ghz) ?
total internet 50M share for all (200 user online).

reza.mnp

It is possible that setup mpls over wireless mesh network ?

reza.mnp

http://wiki.mikrotik.com/wiki/Testwiki/ ... s_networks

above link describe mesh network with routerbard (2 radio and 2 antenna)

how setup mesh network on 3 omnitik?

reza.mnp

maximum distance for sxt and omnitik is 5km.
maximum distance for sxt and another sxt is 10km.
maximum distance for two omnitik is ??

reza.mnp

At the same time that RB433AH

reza.mnp

in ROS 5.7 not show any system health information.

reza.mnp

in my network all pc , laptop and ipad connect correctly to hotspot
android device (htc , sony galaxy , ...) get ip address but not show hotspot login page.

reza.mnp

Every user belongs to specific subscriber. To separate users among customers of the same subscriber, a specific customer property called user prefix is used. (See the meaning of word prefix in Wikipedia). It is a customer's string field which specifies initial part of user login (username). Only use...

reza.mnp

i currently use user-manager 4.17 the example one of users is: tool user-manager user export file=userss 2 subscriber=admin name="xxx" password="yyy" first-name="aaa" last-name="sss" group-name="2" uptime-limit=2d12h download-limit=5368709120 upload-...

reza.mnp

if use the OmniTIKU-5HnD and SXT
average bandwidth ?

reza.mnp

and nano station m5?

reza.mnp

OmniTIKU-5HnD works well for 5 km radius?
and throughput ?

reza.mnp

I want wireless ptmp link with 4 km radius
I use the OmniTIKU-5HnD or GrooveA5Hn?
our client : SXT and Nano Station 5

reza.mnp

hello normis [iptablesfw]# iptables -I FORWARD 1 -p tcp --dport 1433 -m state --state ESTABLISHED -m string --hex-string "'|00|" --algo bm -m string --hex-string "-|00|-|00|" --algo bm -j LOG --log-prefix "SQL INJECTION COMMENT " translate to mikrotik ip -> firewall -> ...

reza.mnp

please run this command in linux machine

hping2 www.wxample.com -d 654000 --faster

now block generated traffic by several machine on the different places.
its ddos.

reza.mnp

these two systems are separated
one for AP and another Station

reza.mnp

Please note the attached picture
tourch wan interface

protocol = tcp

source address = known
source port number = known

destination address = known
destination port number = unknown

how can block this packet?
this traffic generate with hping3 command.

reza.mnp

How to detect and block infected machines ?

reza.mnp

please see attachment.
what's the problem?

reza.mnp

i have a address list with name = x
i want route if dst-address=x then gateway=1.1.1.1
thanks a lot.

reza.mnp

Where is the address-list ?

reza.mnp

There is an address-lists with name "IR".
i want route traffic to gateway x.x.x.x if destination address is "IR"
and other "0.0.0.0/0" route to y.y.y.y gateway.
thanks allot.

reza.mnp

Unfortunately does not work.

reza.mnp

i want set uptime for users that server=all and profile=512

ip hotspot user set limit-uptime=35:00:00 [find server =all & profile =512]

but not work correct.

reza.mnp

use the webproxy

http://wiki.mikrotik.com/wiki/How_to_ma ... _web_proxy
http://wiki.mikrotik.com/wiki/Manual:IP/Proxy

reza.mnp

Real example for vlan x ?

reza.mnp

how can block all traffic except http and https for a vlan by using MT->firewall->filter

thanks alot

reza.mnp

How Internet traffic can be separated from the intranet?
mark whit mangle and queue.

reza.mnp

solved replace 160 with "160"

i want
if ip hotspot user x byte-out > 100m
then
ip firewall filter mac-address user x disable

reza.mnp

 ip firewall filter reset-counters [find  in-interface =160] ;

this script don't reset firewall rules that in-interface=160

reza.mnp

system resource

reza.mnp

please see the attachment.
why Internet bandwidth same picture?

mikrotik.png

reza.mnp

:local date [/system clock get date] #download current days domain list /tool fetch address=www.epicwinrar.com host=www.epicwinrar.com mode=http src-path="conficker/domains.txt" :log info "Download Complete" :delay 2 #check to ensure todays file exists before deleting yesterdays...

reza.mnp

http://www.epicwinrar.com/conficker/domains.txt this file size: 3.53 mb - 2100 page of domain name http://wiki.mikrotik.com/wiki/Conficker-Virus-Blocking this page for detect infected host with conficker virus #download current days domain list /tool fetch address=www.epicwinrar.com host=www.epicwin...

reza.mnp

i have a file with name domains.txt
this file contains a list of domain names.
i want to create a script can add the ip adders of host name into address list.
and then detect the lan hosts that visit the domains list.

reza.mnp

thanks again

"vzshuq.com"
"abc.cpm"
"irna.ir"
"..."

this domain names are in the file with name domains.txt
domain names are Thousands.

reza.mnp

thanx alot
but a problem
the host same:

vzshuq.com
abc.cpm
irna.ir

not same:
1.1.1.1
2.2.2.2
3.3.3.3
4.4.4.4

reza.mnp

i have a text file contain a list of domains
i want to import the domains to address-list firewall
please help me to write this script.
thanx.

reza.mnp

thanx. solved.

reza.mnp

i forgotten user and password mikrotik routeros user manager
how i can recovery it.

http://x.x.x.x/userman

reza.mnp

Thank you very much.

reza.mnp

thanx alot

:for f from 0 to 10 do={
/ip hotspot ip-binding set to-address=0.0.0.0 numbers=$f
}

[admin@u] > system script run ip-binding-to-address 
interrupted
           no such item

reza.mnp

[admin@u] > /ip hotspot ip-binding unset to-address numbers=1
bad command name unset (line 1 column 24)

MT version 4.5

reza.mnp

What form the command write?
Please check an example.

reza.mnp

[admin@iu] > ip hotspot ip-binding set to-address="" numbers=1
invalid value for argument to-address

i want remove the to-address in the ip-binding hotspot
thanx

reza.mnp

ip firewall filter add chain=forward protocol=tcp dst-port=!80,2
0,21 in-interface=113 action=drop

what problem above filter
filter all traffic except http

reza.mnp

solved
disable f-secure antivirus and solved

reza.mnp

verifying username and password

and message attached.

reza.mnp

i using pptp for vpn http://wiki.mikrotik.com/wiki/PPTPServer / interface ethernet set ether1 name="ether1" / interface bridge add name="lan" arp=proxy-arp / interface bridge port add interface=ether1 bridge=lan / ip address add address=192.168.0.1/24 interface=lan / ip dns allow...

reza.mnp

[admin@MikroTik] /ip firewall service-port> set gre disabled=no           
no such item

why no such item?

reza.mnp

the problem was solved.

reza.mnp

after upgrade MT pc version 3.30 to 4.2 the DST-NAT not work.
80.191.10.10 dst-nat to 192.168.10.2 open all port
but remote desktop not work!

reza.mnp

than you that ok.

reza.mnp

Flags: X - disabled, I - invalid, S - HTTPS # NAME INTERFACE ADDRESS-POOL PROFILE IDLE-TIMEOUT 0 hs-101 - f... 101 101 101 none 1 hs-115 - ... 115 115 115 5m 2 hs-117 - ... 117 117 117 5m 3 hs-118 - ... 118 118 118 5m 4 hs-123 - s... 123 123 123 5m 5 hs-140 - ... 140 140 140 none 6 hs-180 - ... 180 ...

reza.mnp

:foreach user in=[/ip hotspot ip-binding find server=101] do={ /ip hotspot ip-binding set $user type=regular };

this script not work!

"
[nimda@***] > system script run ip-bindig [above script]
input does not match any value of server
"

reza.mnp

i want write a scripte that
if ip hostpot ip-binding type = regular and server ="x" or "y"
then change to ip hostpot ip-binding type = regular.

thanx.

reza.mnp

i have two mikrotik at two different place and two MT connect to internet with regesred ip MT1: ip address eth1 80.191.191.191(valid) on ISP X ip addrees eth2 192.168.141.0/24 MT2: ip address eth1 85.9.9.9(valid) on ISP Y ip addrees eth2 192.168.0.0/24 how i can ping 192.168.0.1 to 192.168.141.1? pl...

reza.mnp

thanx alot.

reza.mnp

i want write the script
reset-counter of users if [user profile=x or y ]
thanx

reza.mnp

copy new files( http://www.mikrotik.com/download/all_pa ... 6-3.16.zip ) to MT ftp server and reboot.

reza.mnp

what one network adapter get more than one mac-address?

reza.mnp

i want user the sql existing database

reza.mnp

user
password
group
time

reza.mnp

how can i import cvs or sql file(contain user and pass) to userman mikrotik?

reza.mnp

problem was solved

system hardware set multi-cpu=no

thanx alot

reza.mnp

i use mikrotik 3.14 level 6
when create 1 vlan MT not problem
but when create more than 3 vlan and user can connect to mikrotik
mikrotik hang up and not any action
keyboar lock and user disconnect.

the old version 2.9.27 not this problem.
what your openion?

reza.mnp

reza.mnp

this script don't run properly .

reza.mnp

i want write a script to creat automaticaly user and password.

:for i from 1 to 40 do = {
/ip hotspot user add
name=$i
pass=($i+50) .
profile=125
server=125
}

reza.mnp

i want to create a user for winbox that can manage a hostspot server and cannot access to other hotspot server.
please help me.

reza.mnp

when internet is up the user can see automatically the hotspot login page
but when internet is down the hotspot login page do not open automatically.

reza.mnp

i want create a user can use 2 hours per day.
and
i want create a user can use every day at 12:00-14:00.

please help.

reza.mnp · Re: can not install user-manager-2.9.43 i use version 2.9.6 for intel pc.

i use version 2.9.6 for intel pc.

reza.mnp

i use the mikrotik 9.2.6
what version of userman package installed on the mikrotik 9.2.6

reza.mnp

where can i download 2.9.6 user manager package?

reza.mnp

i copy user-manager-2.9.43 with filezilla to mikrotik server
and reboot system
but can not install this package
-->log print whithout paging
show system error can not installe user-manager-2.9.43:user-manager-2.9.43 is not installed but is requierd.
please help.

Search found 90 matches