I have about 6 Powerline. The problem is only in the 3floor and the second on the 3floor dosn't have the problem at the same time

Hello I have a very instable powerline connection in my bedroom and now I tough i could just use two powerline adapter as for failover reason. But how could I configure that? I can't use Bound or could I? Bound over two develo powerline adapters? Really not sure here. The problem is eth1 never goes ...

After 5 Days I had drops in the internet connection. First I tough it's a other problem, but now after rebooting my RB750Gr3 it's stable again. Do we have a memory leak???

same here

captive portal is reachable from normal network but not from the one i use for hotspot

same problem here with capsman
my ap shows more then once up in capsman.

Funny, now it looks normal.

Hi there I had a working hotsport with 6.49 and now after the upgrade the pc/mobile dosn't get redirected to the captive portal anymore. Is it really because I use http and not https? Thx for help # dec/27/2021 19:47:27 by RouterOS 7.1.1 # software id = G6BZ-KV1Y # # model = RouterBOARD 750G r3 # se...

I upgrade my RouterBOARD 750G r3 seams to work everything except captive portal which dosn't show up on the guest network. Maybe i just reconfigure it.

Seams like my HEX (RouterBOARD 750G r3) crashes after about 30-40 Uptime days and what I just noticed now, winboard dosn't find it anymore, is that because i turned lldp off? I mean that winboard dosn't find the board? When it crashes it dosn't reboot, i just notice that all my AP are down...then I ...

no it's all on the same bridge....since i want to connect from my mobile to the iot i don't need different briges..it's just for the sake of password

Ok well pretty I have 5 AP they all are configured to use CAPSMAN. I have one SSID "STANDARD" for all Mobiles etc. Now I wanted a slave SSID "IOTDevice" for my IOT devices, with a different passwort, so that when i need to change the password on Stnadard i don't have to change al...

Hello, I wanted a normal SSID and a Hidden SSID for IOT Devices. When I use on both networks the same datapath with forward then I don't get a ip from dhcp. I created then a new datapath with the same bridge interface and forward. This didn't work either, now i had to disable the datapath on the dp-...

it seams to be broken on this version

[admin@MikroTik] > /ip kid-control pause Peter
[admin@MikroTik] > /ip kid-control print

Docu says:
It is also possible to pause all restrictions and then resume them whenever you want it.

But when I pause the ip firewall rules are still active.

I try to setup a VPN with ipsec xauth psk for my android phone....but it seams I can't get it to work. Tunnels comes up, but honestly I don't see if phase2 was sucessfull....where do I see it? and well yes it get established but seams like my mobile can't reach anything behind the tunnel. has anyone...

James could you post your config? I get the connection but then it seams my client is missing a route....how did you configure routing/firewall?