MikroTik

valony

No one had issue with this or just to lazy to help ? Mikrotikkkkkkkkkkkkkkk

valony

Hi there, We have an issue with the pppoe retries so maybe there is a firewall rule that has to be made but I ask for your suggestion. On AP side we use Routerboards 411,433,600, Cards XR5, R5H and we use Radiusmanager for authentication via PPPoE. On client side we use Nanostations of every kind. T...

valony

Yes it supports. We alleready have 20 of them running on RouterOS.

valony

Some Dual polarity antenna manufacturers:

http://www.itelite.net/ ( Tested them and work great)

http://www.poynting.co.za/ ( Not tested )

valony

Interim update is alleready set to 00:01:00 but the problem continues. I see that mikrotik guys are not ready to help even that I have hundreds of routerboards and mikrotik products using them for years. I would like to know some reasons what can affect mostly PPPoE connections. I read on some forum...

valony

Is there anyone who is using radius and PPPoE server who can post the configuration of PPPoE server here so I can check what is wrong configured. Im having same problem still. Updated Nanostations to 3.4 airos , Mikrotik to 3.25 OS but still the same issue. Nanostations are not calling in pppoe serv...

valony

Hi Steven,

Thank you for your post but we have 500 units and it would be a bit complicated to log on to every device and turn on watchdog. Im trying to find out what is causing this problem.

valony

Hi, Im experiencing strange problem after upgrading my network infrastructure from simple wireless access list to PPPoE Server. On AP side we have Mikrotik boards 333 with latest 3.24v OS with 2 xr5 cards bridged together. We use Radius manager for authentication allso latest version 3.6.1. On clien...

valony

How to downgrade to 2.x version becouse we have RB600 and it works only on 3.x Os.
Mikrotik guys are you there to reply to this issue becouse it seems that this is a mikrotik bug and not a configuration issue?

valony

Hi, We have the same problem allso. Ap side is RB600 with OS 3.3 , client side CB3 deluxe. We have been using the same configuration since 2 years on OS 2.x but since upgraded to 3.x we experience this that clients that connects through hotspot are loosing the adress from dhcp server after they log ...

valony

Does R52 has this feature allso or only R52H

valony

Thank you Normis, I tried 5Mhz step but It seems that I have to update OS allso becouse it doesnt work on version 2.9.42

valony

Normis the Card is Mikrotik R52-350 which means and I think it is R52H and this card should work over 2.5Ghz. This is the strange thing cus Iv tried everything on settings changing cards but again I see only -2499 in the end.

valony

Anyone ready to help or just to view?

valony

Ww cannot unlock frequencies over 2499mhz. The configuration is :

Routerboard 133c
Mikrotik OS 2.9.42 Level5, extra channels license
Mpci R52-350
No country select
Superchannel

I see only 2312 until 2499 frequencies

Anyone knows what is wrong ?

valony

Becouse we need to to transfer our clients from 2.4 ghz to 2.3 and 2.5 ghz we need some advise. New atheros cards support 2.3 ghz but not 2.5 ghz. I found some old cards with atheros 5211 chipset and I think these supports 2.5+ frequencies. One is manufactured by Ambit the other one is Philips Are t...

valony

Anyone has experience operating in 2.3 or 2.5 Ghz frequency with atheros cards and mikrotik OS. I would like to know if we operate in the frequencies under 2412 and above 2484 will this help us to avoid interference completely from the frequencies mentioned above.

valony

Hi Surfnet

I disabled the default forward and tested the network for 3 days and everything is perfect now. I appriciate very much your help becouse you really solved my problem, I will be glad to be able to help you with any issue in the future.

valony

Sorry, yes both default forward and authenticate are enabled, hide ssid is disabled

valony

Do you have Default Forward turned on? that would allow a rouge DHCP server from a client netowrk to give DHCP to you other clients. The forward chain looks like this: 0 ;;; limit access for unauthorized hotspot clients in-interface=metro action=jump jump-target=hotspot-temp 1 ;;; account traffic f...

valony

Yes the client CPE-s have dhcp server but it's disabled Do you think that let's say on of the client has gone into CPE and switched on DHCP server do you think that that CPE will be available to couse this since all the client connects to the mikrotik hotspot through wireless infrastructure and I th...

valony

Surfnet the default ip of the client bridge is 192.168.100.252. The client hardware is in client mode and the dhcp client in bridge is enabled so the client hardware is getting a lease from the main router but I dont know why the pc in not doing it (sometimes yes and sometimes not). I allso tried wi...

valony

Surfnet do you have msn account where we can talk online my address is vali61@hotmail.com

valony

PC with windows xp and ovislink client AP connected to a pacwireless panel antenna 2.4 ghz 802.11 B

valony

Yes client is shown in registration table and allso in dhcp lease I see that a lease has been offered to client bridge-antenna but not to his pc

valony

Hi Acim No there in no other dhcp server running on my router I allso tried to change DHCP class like trying with 192.168.200.2-254 but it is the same problem, I have some users they never have problems there are some they do but no allways. Allso the IP adress 192.168.100... they are getting is onl...

valony

Anyone alive in this forum

valony

My router is running hotspot with DHCP configured to lease addreses from 192.168.0.2-192.168.0.254. I have about 150 clients. They get authenticated through hotspot and they get IP addreses from DHCP-pool of the hotspot. A strange thing is happening, many clients when they power on the PC-s they are...

valony

Acim

Maybe I didn't understand your question correctly but I'm running hotspot in my routers both os2.8 and os2.9 . I bridge 3 wireless cards and the hotspot is running in bridge interface.

valony

Hi, My router is running a hotspot in routerOS 2.9.6. Alleready I have a 150 user using the service and the problem is as usually with msn messenger. I have 3 user profiles, 64kbps, 128kbps and 256kbps. When a user who is a member of 64kbps profile is using messenger and he starts to download someth...

valony

Did you upgrade only the system.npk, if yes you should upgrade wireless.npk file too.

valony

Thank you guys all. The problem is solved I didnt do anything special just changed the frequency, I think it was interference, yes I use queues in traffic, anyway thank you all.

valony

I have enabled hotspot service on my routerboard 532 through normal procedure but the problem is that when I authenticate throug hotspot the internet traffic is to slow comparing to that when the hotspot is disabled. The routerbard is runing os 2.9.1 and there is ubiquiti 2.4ghz mw card at installed...

valony

Is there any way to queue hotspot users when they reach their 64kbps limit to not have timeouts so they can still use msn messenger without problem. I mean if someone downloads any file or anything and at the same time he is using messenger so when he reaches examle 64kbps then there is no ping repl...

valony

Thank you guys but it looks better not becouse I changed any thing but just by itself. I think some other provajder is doing this to me he is turning on any of his AP on the same channel, anyway thanks a lot.

valony

Hi Im having a strange problem here with my clients. My AP is RB500 with ubiquiti 400mw mpci and there is one sector antenna 20dbi connected to this AP. On the day time everything is fine until around 20:00 or 21:00, then the ping with all clients jumps to 400 ms and more but in the day time ping re...

valony

Kujte faleminers shume po kishe po veti diqka thash, heheehe po zajebati. Une ne vushtrri e kom daje po spo di kaniher me krejt klientat po me hype pingi e po duhet me ja bo ni restart edhe po ndreqet e thash mos me ja vnu ni qasi procesori punon ma mire naj sen. Shihem ne Kujtes, Valoni

valony

Hi, Currently I have a 120 hotspot users that connects to AP using Mikrotik OS and the hardware is: Asus motherboard intel 1.7 processor 512 ddr ram memory mikrotik 300mw pcmcia wireless cards 3pcs Sometimes when all the users are connected they do have some ping timeout's and I think that the route...

valony

HI shielder Im Have AP using Mikrotik 2.8 OS and the hardware is a Pentium4 1.7Ghz, 512ddr ram memory and it contains 3 mikrotik wireless cards 2.4ghz prism 2.5. For the moment I have 100 users that connects to this AP and bandwidth througput for all users is 3 megabit. All users are hotspot users s...

valony

Im planing to purchase two routerboard 532 kits and those are going to be used as a base station for about 100 hotspot users. Is this routerboard able to manage 100 hotspot users with the performances on it?
Should I maybe use routerbard 230, what is the difference ?

valony

Hi,

I have more then 100 users connected to my router and they are all limitted at 64 kbps. Is there any script that will automatically change the queue time like from 07:00-17:00 put the 64 kbps limit and from 17:00-07:00 change it to 128 kbps limit?

valony

Hi Goldclick

I found the way how to do it but it is boring becouse I have to do it manually for every user.
In the target adress I put 0.0.0.0/0 and the dst adress must contain the adress of the user and all this has to be done manually in the simple queue and this works fine.

valony

Router Os version is 2.8.23 Here are the prints of both hotspot profiles and simple queues: 0 * name="default" shared-users=1 mark-flow="hs-auth" login-method=enabled-address keepalive-timeout=2m 1 name="64-limit" shared-users=1 tx-bit-rate=65536 rx-bit-rate=65536 mark-...

valony

Yes you have to add a rule in Firewall Mangle. Add mangle rule, add the user Ip adress in Src adress,
action: accept
flow mark: hs-auth
Than the user should connect without hotspot authentication

valony

Sonny In the simple queie list where all users are shown the bps doesnt change but when I double click on a user and see tha statistics it looks like this: rates (tx/rx) 0 Bps bytes (tx/rx) 0 packets (tx/rx) 0 total rate: 146 kbps (example) total byte: 8795456 (example) total packets: 39535 (example)

valony

Hi sonny,

bps is not changing at all. To use radius if it's about using different tx and rx rate that is no problem becouse I dont need that right now

valony

Yes goldclick you are right and it looks like this when user is online:

name: <hotspot-johnsmith>

target adress: 192.168.0.11/32

Dst adress: 0.0.0.0/0

Interface: All

Limit at: 0/0

Max limit: 65536/65536

Bps: 0 bps/0 bps

valony

No I did not add any queie manually in the queie section. I'm just adding a user in hotspot section and I chose a profile that I have made with a 64kbps limit. When a user is online I check in the Firewall mangle it looks that a user is limited on 64kbps but there is no dst adress only src adress. U...

valony

Hi, I am using mikrotik hotspot gateway and th users are getting authenticated throw hotspot and getting ip addres throw dhcp. I have tried to limit their bandwidth but there is something wrong becouse they can still bypass the queie. When I add a hotspot user I put 65536 for 64 kbps limit and when ...

valony

Im planing to purchase three NL-2511CD+EXT2 Senao pcmcia cards and use them on my mikrotik router . It is not a routerboard it is a pentium 4 that I have build up using mikrotik 2.8 os. Anyone can tell me if OS is going to recognize the Senao cards or not?

valony

Yes I have done all this. I have made 2 new profiles, one for 32 kbps and the other for 64 kbps. Im puting this number 65536 on tx bit rate and rx bit rate in the profile section. When I add a user I chose this profile but it still does't work

valony

Hi, I am using mikrotik hotspot gateway and th users are getting authenticated throw hotspot and getting ip addres throw dhcp. I have tried to limit their bandwidth but there is something wrong becouse they can still bypass the queie. When I add a hotspot user I put 65536 for 64 kbps limit and when ...

valony

Hi there
Is it possible to edit hotspot pages like login page , error page etc. I want to put tha name of the company technical support numbers and other stuff. If it is possible can you explain how please.

Search found 53 matches

Re: Limit PPPoE retries

Limit PPPoE retries

Re: Router OS & 2.3 Frequency

Re: Dual polarization antennas or two antennas in one unit

Re: Radiusmanager-Mikrotik-Nanostation issue

Re: Radiusmanager-Mikrotik-Nanostation issue

Re: Radiusmanager-Mikrotik-Nanostation issue

Radiusmanager-Mikrotik-Nanostation issue

Re: DHCP issue with 3.2

Re: DHCP issue with 3.2

Re: Channels over 2.5 ghz

Re: Channels over 2.5 ghz

Re: Channels over 2.5 ghz

Re: Channels over 2.5 ghz

Channels over 2.5 ghz

Ambit and Philips mpci cards

2.3 and 2.5 Ghz

Hotspot-DHCP problem

Hotspot user queue

Hotspot traffic too slow

bandwidth limit and timeout [SOLVED]

High Ping and timeout's

Will I get better performance with Intel M procsesor

Routerboard 532 and Hotspot

Need a time queue script

Need urgent help - Can't limit hotspot users

Senao NL-2511CD+EXT2 and Mikrotik OS

Need urgent help - Can't limit hotspot users

Editing HotSpot pages