It seems like rule is not processed .... but counter in mangle is counting packets ... Basicly this works like if we have MSS correction disabled ... so no rewrite in header and users have problems with opening pages from servers using MTU 1500 .... Can anybody confirm this problem? thanks and with...

at first, upgrade to the latest version, But i dont see any changes for the proxy in the changelog? A other RB433AH ROS 3.22 with 15 Users online has no Problems with nearly the same setup. I will update on next week. and check that you have 'Max Cache Size' set to 'none' ip proxy print enabled: ye...

Hello, i have the following Problem. Every 10-14 Days i have to reboot my RB433AH which is working as PPPoE Server (with UM) for approx. 100 Users with Web Proxy Redirect to an external Squid Box. The Customers said that the Webpages come very slow. All other Traffic is normal. If i disable the redi...

Hello,

try:
or higher values.

BUT:

http://wiki.mikrotik.com/wiki/Wireless_ ... setting.3F

regards,

kabelfrei

Use this execellent piece of software:

http://www.dmasoftlab.com/cont/home

best regards,

kabelfrei

Nobody has an idea? I look at http://wiki.mikrotik.com/wiki/Wireless_Debug_Logs but i can´t find any entry for my Problem

wireless,info 00:XX:XX:XX:XX:XX@wlan_r52_wka: lost connection, not polled for too long

.

thanks,

kabelfrei

zaltec wrote: I have "lost connection not polled for too long" error too when using 3.18 wireless-test if there are interferences, using regular package is working quite well, even multiple links on the same frequency. So it seems wireless-test is not very good if you don't have a clean s...

11.3km link 2x2 connection with r52n and rb600a.

Could you give us the antenna model and manufacturer ?


thanks,

kabelfrei

hello InoX,

impressive performance. Could you post you config (hardware (cm9?, Antenna?) and RouterOS)


thx,

kabelfrei

Hello, i have the follwing sample configuration (based on the WIKI Article) and want to ask if wmm is configurated in the right way (in both directions)? All Systems have ROS3.6 installed (RB333 Boards with CM9 wlan Cards) Internet------AP A (ether1;wlan1 with wmm enabled)-----wlan-----AP B(wlan1;wl...

*bump*

hi, i have three adsl connections and want to loadbalance as follow: 10.111.0.1---3mbit (Router, 15% of the whole load) 10.112.0.1---3mbit (Router, 15% of the whole load)) 10.114.0.1---16mbit (Router, 70% of the whole load) i have setup the following mangle setup, (RouterOS3.0rc8 X86): 25 ;;; loadba...

will it be also resetted if i upgrade to rc9?


thanks,

laslo

very interesting question!!!

hmmm......


I aslo try eap-tls with certificates (RouterOS AP is set to passthrough), also not working....


Has nobody a simmiliar scenario working?

Hi, could anybody tell me if this scenario works with RouteOS: AP: (RouterOS v3.0beta10 also tested v2.9.44)-----ethernet------Freeradius Server (gets Access Request and send Access Accepts, in configured for EAP-LEAP) | | | | wlan | | | non RouterOS Client (madwifi card driver + wpa_supplicant) The...