+1!

Ok. I found solution. Perhaps it will be useful to someone. So, this part of config: /interface ethernet switch vlan add independent-learning=yes ports=ether1,ether2,ether3,ether4 switch=switch1 vlan-id=110 add independent-learning=yes ports=ether1 switch=switch1 vlan-id=190 add independent-learning...

I´m not entirely sure what your problem is. I am not that often configuring my MT devices, but without a guarantee I guess, it might be the following: /interface ethernet switch port set 0 default-vlan-id=3 vlan-header=add-if-missing vlan-mode=secure set 1 default-vlan-id=110 vlan-header=always-str...

About the use of VLAN in general. The implementation of VLAN on switch chips makes sense only on "real" switches. CRS type. Where hardware offloading really gives noticeable results. For home conditions, as well as for small offices - it makes no sense. Wi-Fi modules are not connected to ...

Thank you all for your response! DHCP-server lives on dedicated server in VLAN 110. And again: wireless clients (home and guest) connected to CAP1 and CAP2 receive ip-addresses without problems. The wireless client connected to CAP3 does not have access to the wired network even if I manually specif...

Somebody help..

Ok. Here it is: # jul/25/2022 16:17:59 by RouterOS 7.4rc2 # software id = CJB9-4KHN # # model = RouterBOARD 962UiGS-5HacT2HnT # serial number = 6F12066E9CD7 /interface bridge add name=bridge1 /interface ethernet set [ find default-name=ether5 ] poe-out=off /interface wireless # managed by CAPsMAN # ...

Hi! I have something like this: CAPsMANwithCAP.jpeg RouterOS 7.4 VLAN 110 - Home network VLAN 190 - Guest network VALN 3 - Management network On HAPac: Acts like switch with CAPsMAN and CAP onboard. Trunked with "main" L3-switch. All ethernet ports bridged. Wlan interfaces automaticaly bri...