note on container settings in v7.18beta4

had to change the Registry URL from "https://registry-1.docker.io/v2/" --> to --> "https://registry-1.docker.io"
now i can pull containers again

In beta5 pull container from https://registry-1.docker.io doesn't work

It's a bit odd, different behaviour. You might even want to consider using the 7.18beta release for testing purposes. Also, on your CAPsMAN VLAN filtering is missing on the bridge. If you want to know more about VLAN and MikroTik, have a look at this topic: https://forum.mikrotik.com/viewtopic.php?...

i installed 7.18 beta, with oneplus same problem.
there are many report online, It seems like a problem related to an Android update
however on a fritzbox mesh network, oneplus roams correctly

other phone roaming, it's oneplus problem

/interface bridge add admin-mac=78:9A:18:C3:12:2A auto-mac=no name=bridge-lan /interface bridge port add bridge=bridge-lan interface=ether2-hap-ax2 add bridge=bridge-lan interface=ether3-cap-ax add bridge=bridge-lan interface=ether4-lan add bridge=bridge-lan interface=ether5-lan add bridge=bridge-l...

https://help.mikrotik.com/docs/spaces/R ... %22package:
here isn't present vlan filtering on wifi-qcom, is present in wifi-qcom-ac

i think VLAN it's ok, because when wifi drops, phone reconnects at the new AP immediately, so RSTP, L2, VLAN for me work.
There's a native VLAN untagged for LAN for have only one broadcast domain with wifi and all switch ports, and there are 2 VLAN, one for management of the CAPs and one for guests

hap ax configuration /interface bridge add admin-mac=D4:01:C3:0E:D8:E5 auto-mac=no name=bridge-lan /interface ethernet set [ find default-name=ether1 ] name=ether1-lan set [ find default-name=ether2 ] name=ether2-lan set [ find default-name=ether3 ] name=ether3-lan set [ find default-name=ether4 ] n...

same result roaming doesn't work, transition from 5ghz to 2ghz work Do your wireless clients support fast roaming? In the Auth type tab do you see ft-wpa2/3-psk? ft.png when i'm at -90db and phone disconnects, i'm in proximity of the cap of 2nd floor at -40db. i imagine the transition should happen...

when i'm at -90db and phone disconnects, i'm in proximity of the cap of 2nd floor at -40db.
i imagine the transition should happen around -70db/-80db

any suggestions on how to configure STP on capsman and caps?

same result roaming doesn't work, transition from 5ghz to 2ghz work

group is dynamic but config is necessary, i think

it's ok? /interface wifi datapath add client-isolation=yes disabled=no name=datapath-guest vlan-id=200 /interface wifi security add authentication-types=wpa2-psk connect-priority=0/1 disabled=no encryption=ccmp ft=yes ft-over-ds=yes name=sec-lan add authentication-types=wpa2-psk connect-priority=0/1...

# 2025-01-21 08:24:02 by RouterOS 7.17 # software id = FZII-NFF9 # # model = RB5009UG+S+ # serial number = HFE094B31YA /interface wifi datapath add client-isolation=yes disabled=no name=datapath-guest vlan-id=200 /interface wifi security add authentication-types=wpa2-psk,wpa3-psk connect-priority=0...

Same results, when signal is very poor, wifi drop, and phone reconnects to the new AP

Fixed country for slave and remove antenna gain.
What does doing connect priority 0/1?

i've similar problem with roaming on my Android Oneplus and my Notebook with Intel AX. i tested with and without ft and steering (rrm, wnm), but i had same results, wifi drops and reconnects here my wifi conf on capsman 7.17 /interface wifi datapath add disabled=no name=datapath-guest vlan-id=200 /i...

LLDP-MED (Voice VLAN) on NON POE Port doesn't work from 7.8

viewtopic.php?p=987143#p987143

here my solution

viewtopic.php?p=970384#p970384

here my solution

viewtopic.php?p=970384#p970384

this configuration work for me /interface bridge add admin-mac=C4:AD:34:07:B2:84 auto-mac=no mtu=1500 name=bridge /interface ethernet set [ find default-name=ether1 ] name=ether1-bonding-ESXi-vmnic1 set [ find default-name=ether2 ] name=ether2-bonding-ESXi-vmnic2 set [ find default-name=ether3 ] nam...

Is anyone else having problems with Capsman? With 7.5 I had to give up using Capsman, as the speed with hap ac2 access points went down to 30 Mbps... :/ The same devices without Capsman are easily reaching over 250 Mps... Capsman is installed on the main router, RB4011, I use vlans, so I do not see...

Host->Configuration->Trigger->Disable trigger CAP interface down

Any update on this bug? Now i have 6.46.3.