MikroTik

ctop

Yes, you can--sort of. If you build two tunnels over the different connections back to your own office, you can bond over the tunnels. No single device would get better bandwidth than one of the links, as the current bonding technologies assign individual flows to one path or the other. Simply put ...

ctop

would exploring Wireguard or Zerotier get me something like this?

ctop

Am I missing something here - Can I config a CRS310-8G+2S+IN to be a router? or is there something in it that its only a switch?

ctop

I'm no Mikrotik pro yet.... but know enofe to be dangerous =) The goal is to auto bond an LTE connection with a Starlink - Pepwave sells there service to do this, but could I do this with a Mikrotik? I'm guessing my office would have to be the hub that it all bonds too before going to the internet. ...

ctop

I see there is a BELL firmware.... but clueless if I can update this while installed in the LtAP
You can't AFAIK. You need to do it a Windows machine using a USB-to-miniPCIe adapter.

Cool - do you think it will help anything?

ctop

I see there is a BELL firmware.... but clueless if I can update this while installed in the LtAP

ctop

BELL (Canada) !IMPREF: preferred fw version: 02.33.03.00 preferred carrier name: GENERIC preferred config name: GENERIC_002.072_001 preferred subpri index: 000 current fw version: 02.33.03.00 current carrier name: GENERIC current config name: GENERIC_002.072_001 current subpri index: 000 Do I go get...

ctop

Thank you techkyle for the great write up.... I was a bit worried but I followed it to a tee and got a MC7455 working in a LtAP (used bottom slot for 3.0) but I'm not sure I'm totally happy with its performance. Used a Quectel EP06-A in a different install and that was a easier setup and it integrat...

ctop

I think many of you have gotten this to work, but what's the trick to getting it to show up?

Running 7.12.1 and now seeing the card, already playing with LTE mode, mbim and serial with no luck

ctop

I think you nailed it for me - I did test a ROGERS sim and much better

I do have a EP06 and EM12 have to dig them out, oh also a MC7455 - need to test those.

ctop

Following - Same problem here, but on BELL (Canada) Access Tech - shows I'm at LTE (CA2) I did limit the bands to only what is here - but still getting 10-15mb where my iPhone6 gets x5 that. Any other things to look at? MTU? I did uncheck the 3G.... but still the same. The plan is a modem/tablet one...

ctop

Again, it seems to not be working as it should.
I see remote cpu load at 100%.
And once again, big thanks for providing this service.

Glad its not just me...... was about to ask something thing.

ctop

Yes, just, tight fit though, my em12-g barely fits.

Ep06 fits without issues.

Cool - and setup on ether is flawless? They show up at LTE interfaces?

ctop

Simple question - tried searching....
will an M.2 adapter fit in a LTap Mini?

An EM12 (M.2) is what I would like to try, if not maybe a EP06 (miniPCI)

Or just use a Full size LTap if I'm looking for that extra performance anyways

ctop

I don't have enough experience to really nail it down for you, but I have used a solution involving an LtAP router, EM160R-GL Cat16 LTE modem , and a QuPanel APLM4 LTE MIMO 4x4 directional antenna with seventeen foot lead mounted to roof. It is PoE powered, so install where needed. Running firmware...

ctop

I'm just playing with two Sierra MC7354 and MC7455 in a LtAP (7.5) using the bottom slot and both are just showing up as "ppp-out1" interfaces, what am I missing on the config, was hopping they would show up like LTE cards

ctop

and solution to this - also trying a MC7354 with no luck

ctop

not sure if its the "best" but the one that comes with the NetMetal 52ac works great for our RV https://mikrotik.com/product/RBMetalG-52SHPacn

ctop

ditto - thanks for that - going to try and do with with Netmetal with two AC cards installed.

ctop

Its time the caps ac gets more ram and rom to be able to run the wifiwave2 drivers, maybe they are preparing a new revision?

could only hope

ctop

I'm out of ideas - is there anything else I can try? Long story short - did a firmware update and now nothing, can't see them at all. I tried holding down the reset for more then 15-20sec.... to see if I can do netinstall (not seeing anything) but also when holding down button I never see any LED go...

ctop

Audience is just using CAPsMAN and link with other CAP-devices on the third wlan similar to repeater (bridge-ap/station-bridge). It is not using WDS mesh or any specific mesh technology. Source:? The device itself..; [admin@Audience1] > /system default-configuration print script: :global ssid; #| R...

ctop

Got these new OmniTik 5 AC POE and can't see the LED's to something else like I could on other hardware - was hopping to make the LED so wireless signal.

ctop

I haven't used an Audience hardware - can is be configed with Winbox? and if so, could someone share its default config? I would like to maybe build something like that with other outdoor hardware. Based user manual - https://mikrotik.com/product/audience#fndtn-downloads it can be configured with W...

ctop

I haven't used an Audience hardware - can is be configed with Winbox? and if so, could someone share its default config? I would like to maybe build something like that with other outdoor hardware.

ctop

The problem with expecting the MikroTik bandwidth test to show you an accurate wireless throughput is that most of the units dedicated to serious wireless don't have powerful CPUs, and the CPUs at the far end max out trying to run all the bandwidth test servers long before the wireless link is satu...

ctop

its getting better, been making some changes

under Registration
now showing -57

I change both to 20/40/80 xxxx for fun with auto freq and now getting about 119 Mbps oneway

Will I ever hit close to the 433 number?

ctop

I know the mAP lites aren't weatherproof, but was hoping I could stuff it in the cable cover. But yes I want it outside. But back on track with my two Metal 52 ac's it bugs me that I can't get more then 100mb one way with the speed test inside winbox. Is there something I could post that someone mig...

ctop

Assuming you means "cars" as in automobiles (i.e., as opposed to "AV carts"), I would expect you would like a weatherproof unit. My first choice would be one of the wAP models.

dumb question, do they need to be facing each other?

ctop

using the antenna that came in the box, both are 52ac so hoppfully they aren't the wrong ones from packing.

So the OmniTIK would be better with its dual chain? then I thought of putting a mAP lite on each one for clients to connect too.

ctop

Following - trying to do the same thing, the Audience would work - but trying to build it out other products, like maybe a NetMetal, OmniTek and or Metal5

ctop

currently its floating around -71/-72 and they are on 50ft apart.

I'm kind of trying to build a outdoor version of the Audience - but also thinking the Metal 52 ac is the wrong starting point, should I be doing this with OmniTIK 5 ac hardware?

ctop

I got two Metal 52 ac connected to each other, currently only 50ft from each other and doing a internal speed test (TCP/Both/random) and only getting about 40 Mpbs Not sure if that is good/bad, what other things could I look at improving? I need to stay at 5G Both are set as 5G N/AC 20/40 eC Atenna ...

ctop

Apparently there is a faulty CAP. Since I do not have direct access at this location I have just noticed (via winbox) that one of the CAP's has no IP in the lease list of RB2011. It may have lost its configuration due to ac-electric power failure. Starting a winbox via a local computer have shown t...

ctop

But even with that custom GUI - anyone have idea how to access it with winbox?

ctop

Following some other posts I got the web proxy kind of running, I see it is Caching items - but I can't seem to confirm that is it re-giving out the files when I go back to those some sites. Under status - its only showing hits=3 is this how many files it gave vs going out to the internet? or am I l...

ctop

Judging by their screenshots they are using custom software, not RouterOS.

you are correct - but is wouldn't it have to be running RouterOS in the back ground? with there custom web interface?

ctop

Not sure if anyone has tried - but does the wifiranger (on Mitrotik hardware) even run RouterOS? I can't seem to get winbox to see my wifiranger

ctop

pukkita - great right up, will try soon.... I do also have the wifiranger version - but can't us winbox to do anything advanced too it.

Search found 39 matches

Re: Something like Pepwave SpeedFusion

Re: Something like Pepwave SpeedFusion

CRS310-8G+2S+IN Router??

Something like Pepwave SpeedFusion

Re: MikroTik LTE Sierra Wireless MC7455

Re: MikroTik LTE Sierra Wireless MC7455

Re: MikroTik LTE Sierra Wireless MC7455

Re: MikroTik LTE Sierra Wireless MC7455

LTapMini w/ EP06

Re: LtAP LTE6 kit: underperforming mobile internet

Re: LtAP LTE6 kit: underperforming mobile internet

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Re: will an M.2 adapter fit in a LTap Mini?

will an M.2 adapter fit in a LTap Mini?

Re: which LTE router is best for me?

Sierra MC7354 and MC7455 showing up as ppp-out1

Re: Sierra Wireless MC7354 Not Working in LtAP

Re: Outdoor Omni-Directional WiFi Antenna?

Re: Audience - default config

Re: cAP ac availability

map lite and wap ac not booting

Re: Audience

OmniTik 5 AC POE - can't config LED's

Re: Audience - default config

Audience - default config

Re: Metal 52 ac to Metal 52 ac

Re: Metal 52 ac to Metal 52 ac

Re: Metal 52 ac to Metal 52 ac

Re: Mesh Network for Art Cars

Re: Metal 52 ac to Metal 52 ac

Re: Mesh Network for Art Cars

Re: Metal 52 ac to Metal 52 ac

Metal 52 ac to Metal 52 ac

Re: DHCP server problem

Re: winBox access to a wifiranger

Web Proxy Help

Re: winBox access to a wifiranger

winBox access to a wifiranger

Re: 52ac + hAP ac - Is this enough for my RV?