dear @bpwl, I think I know where the problem was. I had routes and address set on the 2nd ac together with IP. I removed all the routes and address. Now everything is "connected" together on the 2nd ac only via a single bridge. And I can say it works flawlessly. The client (iphone) switchi...

Dear @bpwl, Thanks for the reply, yes I'm trying to wrap my head around this too. To your questions: Bridge mode is still "enabled" in advanced wireless setting of 1st ac2 5 GHz WLAN2 interface? yes it is. Status of this interface WLAN2 is "running", and not in the 1 or 10 minute...

Dear community, I'm new in the RouterOS/Mikrotik world so I'm seeking for your help/advice. I have two identical haP ac2. 1st ac2 (router/gateway to the internet/DHCP server) with AP bridge on wifi interfaces for both 5G/2G (802.11) both share the same SSID 2nd ac2 is the bridge (no NAT, no FW, no D...

@bpwl pardon my ignorance but I can't see the option to change the channel for the Virtual WLAN in Winbox. Am I missing something ?

Yeah I see, but I still don't understand why it's dropping packets when I'm in overlap with two routers ? Perhaps because they are broadcasting on the same channel ? Is it possible to have repeater re-broadcast on different channel ?

Dear Mikrotikers, Due to limitations in the house where I live I can't use cabling and therefore I'm forced to go with the Repeater Mode to extend the WiFi Coverage in the house. My current setup is: Living room. HAP AC2 acts as the router and the gateway to the world. 5G/2G on the same SSID. Room 1...

Yes, I was reading about this as well. The problem is that I used this router in a different part of the world and now I moved. So the Location on the Apple's DB is not up to date. Firstly I thought that this information is being pushed via DHCP. But I was wrong.

any help ? Would be much appreciated!

OK, so a simple dstnat did the trick. I was thinking I'm going nuts. Finally called my little ISP and talked to they network admin. Turns out there the Public IP was shared amongst others and it was nated on their side. Once he made adjustments it's fully working now.

Dear Mikrotikers, I'm using the RBD52G-5HacD2HnD with Router OS 6.47.1. MacOS is getting the current location from the router so it automatically sets the correct timezone for example. I'm wondering what and how to set this up so Mikrotik broadcasts this information and OSX can understand it. Thanks !

The WAN IP is: 192.168.68.113

Couple of observations (1) The interface should be consistent including ip address which should refer to the bridge!! /ip address add address=192.168.170.1/24 comment=defconf interface =ether2 network=\ 192.168.170.0 (2) Also it looks like you do not have a public IP address but a natted address fr...

here is the export: # jul/12/2020 14:00:54 by RouterOS 6.47.1 # software id = xxxxxx # # model = RBD52G-5HacD2HnD # serial number = xxxxxxxxxx /interface bridge add admin-mac=74:4D:28:83:F1:89 auto-mac=no comment=defconf name=bridge /interface wireless # managed by CAPsMAN # channel: 2412/20-Ce/gn(1...

Posting the firewall rule list. Flags: X - disabled, I - invalid, D - dynamic 0 D ;;; special dummy rule to show fasttrack counters chain=forward action=passthrough 1 ;;; defconf: accept established,related,untracked chain=input action=accept connection-state=established,related,untracked log=no log...

Hello, I'm pretty new into a networking world. I'm trying to do dstnat on a bridged network. I'm using the default firewall rules that came out of the box with the router. I'm using the "Use IP Firewall" on the bridge. When I configure the dstnat in IP Firewall the traffic on the port does...

I see but will it be seamless ? I usually pick a call upstairs and then go downstairs.

Dear Mikrotik users, I'm quite new in the mikrotik world. Just recently bought the MIKROTIK RBD52G-5HacD2HnD-TC and managed to successfully configure it so it acts as a LAN/WLAN AP router with DHCP server forwarding traffic to a FTTH modem using a VLAN interface. The house where I live in (environme...