tried every combination for compression in sstp-client advanced tab, but unfortunately it didn't work.
But fortunately, there is an option in xl2tpd client called "L2TP ephemeral source port" which changes the source port of the l2tp and will work with NAT.

I have a Windows 2019 NPS Server and Mikrotik as a RADIUS client. Windows and ubuntu 20.04 SSTP clients work like a charm. However, the ubuntu 22.04 SSTP client is not! After successful authentication, Mikrotik shows below error codes and drops the connection: <sstp-ubuntu22>: authenticated <sstp-ub...

Simply delete "%USERPROFILE%\AppData\Roaming\Mikrotik" folder and open winbox again and then you can use the save button again.

Finally, this mini-guide solved my VoIP problem (No VoIP over PCC).

I did a bandwidth test with "RoofTop Switch", and also a download test and It works like a charm. Thanks, to ingdaka and anva. But there is a problem with VoIP remote users. Their softphones can't reach the VoIP server with IP 192.168.0.2:5060 right after PCC implementation. https://i.ibb....

After that, I did a PCC load-balancing using this tutorial in main router. #Policy routing / ip firewall mangle add chain=prerouting dst-address=x.x.x.252/30 action=accept in-interface=BrLAN add chain=prerouting dst-address=y.y.y.128/30 action=accept in-interface=BrLAN add chain=prerouting dst-addre...

After a few days struggling with VLAN concept, finaly came up with these blockes of code by customizing pcunite VLAN tutorial. "RoofTop Switch" with ports 1-4 (dishes and branch office) for access and port 5 for trunking (VLAN Security not implemented) # create one bridge, set VLAN mode of...

Sorry if I didn't provide a clear explanation. A few days ago we added 2 more WAN links to our network, and It's really difficult to add two more cables up to the rooftop. So I decided to move PoE adapters and a L2 SW near dishes. I don't have any idea about how to setup ether1 to use these WAN conn...

Please, any clue would be enough.

hey guys
Here is the problem: I have one RB4011, one cable, two transparent wireless Dishes from two separate ISP with different public IP addresses.
What should I do to avoid adding one more cable?