MikroTik

foraster

*) snmp - added wifi fields to MIKROTIK-MIB;
Where can I view the .mib-file? Which OIDs?

Did you get the new OIDs for wifi clients?

foraster

Trying to upgrade a CCR1009 working as a wifiwave2 capsman from ROS 7.12 (has routeros and wifiwave2 packages) I get an error: Will I loose the capsman configuration ? You dont need any wifi packagge on your CCR anymore to have a running >wifi< capsman. All included in the routeros package. You mos...

foraster

Will I loose the capsman configuration ? It is a possibility. As far as I remember wifiwave2 config structure is pretty close (if not the same) as the (new) wifi config structure. So even if you'll have to manually upgrade configuration after you upgrade ROS, it shouldn't be a big problem. Export (...

foraster

Trying to upgrade a CCR1009 working as a wifiwave2 capsman from ROS 7.12 (has routeros and wifiwave2 packages) I get an error: Will I loose the capsman configuration ? As always export terse file=<filename> show-sensitive will be your friend if configuration would be lost. You can always restore re...

foraster

Trying to upgrade a CCR1009 working as a wifiwave2 capsman from ROS 7.12 (has routeros and wifiwave2 packages)

I get an error:

wifi-qccom-ac-7.16.1-tile.npk missing, use ignore-missing or disable package(s)

Will I loose the capsman configuration ?

foraster

Did you also upgrade the firmware (under System -> RouterBOARD, and then reboot). The hAP ac² has a IPQ-4018 CPU and according to the changelog, a firmware upgrade is required for IPQ-40xx *) routerboard - improved Etherboot stability for IPQ-40xx devices ("/system routerboard upgrade" re...

foraster

Experiencing lots of reboots (up to every 2-30 minutes) on a HAP AC2 working as a wireless trunk between two segments of the network, upgraded to v7.16, on logs I only get the " possible power outage " message. Power supply has not failed before... Similar devices with wired ethernet trunk...

foraster

Regarding hap ac2 lack of space, mikrotik could partition the router OS main package into smaller packages (again) and let the user choose the functions he wants to install. Another -probably more unsecure- option could be allowing packages to be installed on external storage, and yes I know we alre...

foraster

Thanks, I've open a ticket to support

foraster

Just landed in this post looking for the new capsman connected clients oid

Did you find the new OIDs are implemented?

Regards

foraster

Just did a quick upgrade to an hAP ac lite with a wireless interface working as station-pseudobridge and the other wireless interface managed by a remote CAPSMAN, from ROS7.13.3 to 7.14beta9. Lost layer3 connectivity (ping, ssh, telnet,...) mac-telnet and mac-ping working. Connecting to an ethernet ...

foraster

Thanks, regenerating the certificates did the trick.

foraster

Cool, I've been trying to enable the new Capsman but when doing so, the lecacy-capsman CAPs get disconnected...

foraster

With latest RouterOS versions (7.13 and later) is it possible to have on the same router both a legacy-capsman and a wifi-capsman?

foraster

I'd like to migrate the configuration of our CAP AC, HAP AC2 and also the HAP AC lite to the new Wifi driver and the new Wifi CAPSMAN, but some of the divices aren't ARM: HAP AC lite is mipsbe. Are there plans for supporting the new Wifi driver to the mmips devices? Or we better start planning the m...

foraster

I've been using Wireguard on my main router, an hEX (mmips) for some time, running great. To the point of being sure to shut down my openvpn server. Sometimes the main connection is down and the backup is behing a CGNAT, so I needed a solution for this puntual cases. I read the BTH uses wireguard, s...

foraster

Since updating a CAP AC I detected this error in the log after booting: error while running customized default configuration script: no such item Apparently the device is running fine (except for the lack of vlan assignment via new capsman), but how should I get rid of this error? Is there prevision...

foraster

Did someone find a way to auto-login or to pass user+pass to open webfig?

foraster

Hi, I am planning making a simple dashboard with some data from a mikrotik device. All I need is accessing in read-only some parts of webfig. I created a user with webfig and read permissions, also created a webfig skin allowing only access to the needed menues. Is there some way to automate the log...

foraster

Same question here, does the Dude v6+ have a map export function other than viewing the maps on webfig?

foraster

Did someone manage to export the Dude viewable map (with the url posted previously) to an image, for example every 10 minutes?

I saw that the svg is embedded into the html code of the page, but can't find a straight way to get it to integrate with another tool into a general dashboard.

foraster

Thanks I take note of this behaviour. Until now it has not failed anymore (if it fails on january the 4th then it will be 7 days...)

foraster

Indeed, same reason (unspecified(1)).
Thanks, I will try and check your advice.
I suspect there has been some external interference, because it has failed 7 days later.

foraster

After a week de device has failed again.
Is there any setting in the Mikrotik that can be changed to minimize those errors? (hw retries, disconnect timeout, ...?)
The device had been working with this same router for over a year without any glitch.

foraster

Thanks, after trying different solutions all morning with this issue I restarted the client and the error disappeared (it is an esp8266 board, will check it the following weeks if the error appears again)

foraster

Hello, I have installed some hap ac2 with AP and virtual APs. Today I have found that one of the devices that connects to one of the virtual APs is getting banned: error_banned.png I have tried disabling temporaly the interface and enabling again, but the device keeps "banned". Where is th...

foraster

Let me add some logs for completion: 10:31:13 wireless,debug wlan1.1: 78:11:DC:xx:xx:xx attempts to associate 10:31:13 wireless,debug wlan1.1: 78:11:DC:xx:xx:xx not in local ACL, by default accept 10:31:13 wireless,info 78:11:DC:xx:xx:xx@wlan1.1: connected, signal strength -57 10:31:14 wireless,info...

foraster

Similar problem here, but with a Xiaomi Vacuum disconnecting periodically from a hAP ac2, in this case working in the 2.4GHz band. I changed some settings (Hw retries, disconnect timeout, On fail retry time) about 14 days ago and it has failed again with a similar behaviour. Momentary disabling the ...

foraster

I was using an old huawei 3G USB stick with my mikrotik router, but it has stopped working after a power outage.
Looking for a replacement I find the Huawei E3531i-2 quite cheap and with enough capabilities for being used as a backup wan.
Did anyone make it work with a mikrotik router?

Thanks!

foraster

I'm afraid I'm far from home right now, let me put it in my todo list. Basically I followed the tutorials stated in the first posts https://forum.mikrotik.com/viewtopic.php?f=13&t=143620 The only change that I did was renaming the interfaces and vlan names, configuring a trunk port and finally a...

foraster

The second should not be a problem: +1 local port to add to the bridge; -1 wan port and everything related to connecting to the outside world; -all dhcp servers; +1 dhcp client on one of the vlan-interfaces (on this device it is actually ok if the bridge is a tagged member for only one vlan - to ha...

foraster

Told ya!

My fault! I promise I tagged it at least once!

Thanks for your help.

Now I'm reviewing the second Hap AC2. Probably I'll come back with other questions.

foraster

Bridge BR1 is tagged member only of VLAN 99 ... but should be tagged member of all VLANs which have their corresponding vlan interface (10, 20 and 30).

Thank you very much, with all the try-edit-and-changes i thought I had tagged it.

Now it's working:

BR1_vlan.png

foraster

In order to stop guessing post your:
Code: Select all
/export hide-sensitive

Done

foraster

Suggest you post a working config for review. /export hide-sensitive file=yourconfig (also delete any WANIPs and gateway addresses, and any WIFI passwords etc.......) I maintained the original config, with the bridge "BR_original". When I move some of the interfaces to the new bridge &quo...

foraster

In most of the the cases when DHCP server doesn't work on vlans after initial configuration, the reason is somebody forgets to add bridge itself as a tagged member of all needed vlans, and as a result - all vlan-interfaces configured on that bridge are actually not connected anywhere. Thanks for th...

foraster

If you're coming from Cisco, this may also be helpful for bridge VLAN configuration in MIkroTik.

https://www.stubarea51.net/2019/02/06/c ... and-vlans/

Thanks for the reference, it will be very helpful!

foraster

Thanks for your reply, I appreciate if you can show some working example. Following the tutorial stated before I can't make it work.

To clarify, I'm trying to configure an AP and a virtual AP for each band (2.4 and 5 GHz) on the HAP AC2s

foraster

After a couple of days trying some configurations and reading tutorials like this https://forum.mikrotik.com/viewtopic.php?f=13&t=143620 I can't make the dhcp servers associated to the vlans assign any IP address. Any idea of what can I try? I created a bridge and the vlans associated with the w...

foraster

Hi, thanks for the tutorial.
I've been trying the all in one (switch+router+ap) template but can't make it assign any IP with the DHCP servers associated with the vlans.
Will it work out of the box in a HAP AC2?

foraster

Hi everyone, I have upgraded my network equipment and changed my old home wireless router and access point with two mikrotik HAP AC2. One acts as a main router, connecting to the internet, and the second HAP AC2 has been configured as a basic AP, in the same subnet. The connection between them is do...

Search found 41 matches