***UPDATE*** Just wanted to give an update on my issue. I bought and received my hAP AC2 today. Installed it tonight and transferred the settings I had in my RB2011UiAS into the hAP. Ran a speedtest and instantly got 400mbps down/20 up. The hAP gets warm, but not blazing hot. CPU usage is low and ha...

Out of curiousity, anyone in here use a hAP ac2 on a connection at or better than 400mbps? I just wanted to see your thoughts about the device when plugging into a connection like that.

thanks

According to test results hEX S is some 60% faster than RB2011. So I wouldn't bet anything valuable to me on hEX S to be able to route 400Mbps. IMHO the lowest-priced RB able to do it without a sweat would be RBD52G (hAP ac²). And no, you don't have to use wireless interfaces, you can switch them o...

Test results on product pages ... as far as my experience goes[*] (none at all regarding RB2011) results indicate that indeed speed around 200Mbps might be ceiling for this device. [*]personally I find test result for "Routing 25 ip filter rules using 512 byte packets" the best representi...

Well, my computer at work runs Debian Buster, and that's the computer I remoted into last night to run that speedtest that got me 150/20. And that's with the queues off. So, I don't think it's based on the OS of the computer that would make me lose speed. What I'm thinking is...that it's the RB2011 ...

I also want to add that I have a RB2011 with 6.44 firmware at work, and I just disabled queues and ran a speedtest on it. We have Spectrum Business 400mbps, but I'm only getting 130 down but 20 up. And that what kills me. The upload speeds are what I'm supposed to be getting, but the download speeds...

I just got off the phone with Spectrum. They tested the line up to the modem, and of course, they're reading 476Mbps down/20 up. I connect the PC to the modem directly, same result. But when I connect my RB2011 to the modem, I get about 120/10. I suspect it's the router and/or its firmware (6.45.7)....

So....disabling route cache got you the speeds you were looking for?

I'm having the same problem as you. I don't want to downgrade if I don't have to.

I have queues but I still use a fasttrack connection fw rule. I queue the whole subnet and then fasttrack specific groups of ips by using address lists in the fw rule... Checklist... Are you testing from a 1Gbps NIC on your test PC = Yes Does your Spectrum modem support 1Gbps = Yes, that's what the...

Well.. after quick glance; does not look like you have any fasttrack rules in place in your firewall. For me this is critical for performance on the cpu.. This marks the packets so the cpu does not peg out. I tried putting fasttrack rules in....it only went up to 210-230/20. And I use queues, so......

I do not know what make or model of modem they installed, nor do I know what was there before. Only that the old one supported 300Mbps and the new supported 1Gbps which was all I really cared about.. This is a remote managed site with a six stack. I was not there during the upgrade/install. I will ...

Can you post full config here, using export hide-sensitive, place output of export between code brackets, on the button menus, please look for it I hope I did this right.... # nov/06/2019 15:03:44 by RouterOS 6.45.7 # software id = ZA4A-W5CN # # model = 2011UiAS-2HnD # serial number = ********** /i...

Cyan, what modem do you have from Spectrum? I was given this Hitron model... I found this in the forums: https://forum.mikrotik.com/viewtopic.php?t=138895 and the prevailing idea in that thread is that problem manifests itself after ROS version 6.36.4. Anything before that, speeds are supposedly fin...

I have the RB2011 and upgraded from grandfathered Time Warner Cable's 200Mbps to Spectrum's Ultra 400Mbps. I was getting close to 400Mbps with the router in place. But just last Saturday, we decided that we had enough of paying too much to DirecTV and went to the Spectrum Store in town and added Spe...