MikroTik

brixsat

Any one?

brixsat

Tried your suggestion and ended up like this, still no luck. The manufacter said the tv should support wifi 5. # 2025-01-07 23:41:04 by RouterOS 7.16.2 # software id = A4W7-3RQB # # model = RB4011iGS+ # serial number = F********* /interface wifi datapath add bridge=bridge-home disabled=no name=data-...

brixsat

At the best in the logs from a lot of changes i get authentication timeout nothing more.

brixsat

Hi everybody, Happy new year :) I have bought a samsung tv model TQ55Q60DAUXXC in December and cant make it work with my wifi ax (capsman v2). I have tried everything but strangely enough the tv connects to my phone hot spot using 2.4 and wpa2/wpa3. What am I doing wrong? Teach me masters. # 2025-01...

brixsat

Yes its true its for the pc. I was not clear.

Sorry for the confusion.

Will give a go to the Axago ADE-SG, for 17$ its cheap try.

Thanks

brixsat

Hello Can anyone recomend a good ethernet usb adapter compatible with mikrotik? Ont that is able to do netinstall and show neighbors in the winbox tab. I have the following https://www.tp-link.com/pt/home-networking/computer-accessory/ue300c/ and is crap, does not work. Gigabit is not important. PS:...

brixsat

https://mum.mikrotik.com/presentations/US12/tomas.pdf

viewtopic.php?p=838538

Thanks will look into it.

brixsat

Loadbalance is what it is making I guess. But if i leave it this way is there a problem?

I probably will go with the failover on the mikrotik wiki.

Thanks

brixsat

Hello all, Thanks for the help. Im trying to make dual wan work, at the moment it seems to work with just these 2 lines could It be right? I think is load balancing somehow and I don't quite understand. Will it cause problems? Can some one enlighten me? Thanks in advance. /ip firewall nat chain=srcn...

brixsat

sky is the limit with mikrotik

brixsat

Solution

/radius
add address=127.0.0.1 service=hotspot timeout=600ms

brixsat

Why do you have the rule that allows userman access to LOCAL as disabled?????
add action=accept chain=input comment="allow userman to work" disabled=yes src-address=127.0.0.1

Sorry that was disabled during a test, still no radius with that enabled.

brixsat

Hello, I have a problem I am not able to solve and after days in the forum and a lot of trial and error not able to find the solution. I have a hot spot configured with one WiFi network, all OK until the login part. When i press login button the message i have is "Radius server is not respondin...

brixsat

The problem was comp-lzo. Now it works.

# mikrotik does not support
#comp-lzo

brixsat

Fixed
I had to remove comp-lzo from client.

# mikrotik does not support
#comp-lzo

brixsat

will try that and report

thanks :)

brixsat

I only have problems on openvpn. Cant find out why.

pptp = all ok :)

openvpn = no routing, no access to the router, no access to local lan nothing. I have an ip after connect but nothing else.

brixsat

Anyone?

brixsat

Any one?

Its very strange why one works and other dont.

brixsat

Hello, I have a mikrotik with 2 vpn servers. The pptp server vpn i can connect and with success and is working nicely (lan + internet without problems). The openvpn server i can connect but no lan, no internet, no nothing, just an ip from the 192.168.89.x network, nothing else, no internet, no acces...

brixsat

So when you set the bridge-horizon on datapath again, these dynamically added bridge ports will disappear?

No sir, they will not.

brixsat

Thanks

the irc saved me from pulling my hair out.

Amazing complement to the forum.

brixsat

What surprises me most is that your /interface bridge port print detail not only doesn't show ether9 although in the configuration export it is listed as a member port of bridge_capsman , but it doesn't show membership of the capsman interfaces in the bridges bridge_wifi_corp and/or bridge_wifi_gue...

brixsat

Removed bridge horizon on datapath.

Now works.

brixsat

Thanks for the help. On a device connected to ap 1 cesar@araujo-laptop >ping 10.2.2.187 PING 10.2.2.187 (10.2.2.187) 56(84) bytes of data. From 10.2.2.166 icmp_seq=1 Destination Host Unreachable From 10.2.2.166 icmp_seq=2 Destination Host Unreachable root@prusai3:/home/pi# traceroute 10.2.2.166 trac...

brixsat

Thanks for the help :) [admin@Core-Capsman] > caps-man actual-interface-coadmin@Core-Capsman > interface bridge port print detail Flags: X - disabled, I - inactive, D - dynamic, H - hw-offload 0 interface=ether2 bridge=bridge_lan priority=0x80 path-cost=10 internal-path-cost=10 edge=auto point-to-po...

brixsat

Please Nobody?

brixsat

Hello, Thanks for helping me out. I have a routerboard rb4011i configured as capsman and 4 Aps (2 metal ac 52 and 2 cAP Gi-5acD2nD) doing 3 networks, cable, wifi and hotspot. I have 3 networks, cable 192.168.9.0/24, wifi administrative 10.2.2.0/24 and hotspot (172.16.1.0/24), and 10.1.1.0/24 for cap...

brixsat

Hello, I have a mikrotik r4 4011iGs and a few aps connected as capsman. At the moment i have about 25 devices connected to the router receiving dhcp. The problem is, some devices cannot: 1- ping the device 2- open the web interface 3 - telnet with winbox to the device and others do it just fine. All...

brixsat

We need more info

so we can help.

Please state config, cenario, etc...

brixsat

Thks

Not ideal but works.

brixsat

Thanks,

I have searched and have not yet found a solution.

If any one could help, would apreciate it.

brixsat

Hello, Happy new year to everybody. I have a simple (possible stupid) question. I have a router doing capsman + hotspot, and have some metal 52Ac and Cap Ac doing Access points. My capsman config has 2.4G and 5G config. All ok and working nicely on the Cap AC, but on the metal 52AC i would like to o...

brixsat

Thanks to everyone that helped

brixsat

hello, for 50/60 clients Wap AC is a good option.
All access point are wired ?

Everything is wired yes. No mesh or anything like that.

Thanks in advance.

brixsat

Where is the RB4011 located? What are the size of the buildings the access points will be located in? Are they one rooms or split into several rooms?? Thanks, Rhe RB4011 is located in one of the 2 places in the map. The area to cover from the ap in the building is 10/15 meters radius. There is a sm...

brixsat

i think you better go with wap ac's for access points, based on number of user that should connect you chose the quantity and the location. RB4011 is fine as main router and you can set as capsman, hotspot users can be managed through usermanager For example the RBwAPG-5HacT2HnD-BE? For outdoor use...

brixsat

Metal 52 ac is only 1x1 and does not support 2,4 and 5 GHz simultaneously.

What is your alternative?

Thanks in advance.

brixsat

Hello,
How many clients will the installation support ?

50 /60 Clients average.

brixsat

Any help?

brixsat

Hello, Thanks for reading this post and helping me. I own a campsite and need to cover it with wifi. What is the best option? I intent to use the following material: 1 x mikrotik RB4011 (RB4011iGS+RM) 3 xmikrotik Metal 52 ac (RBMetalG-52SHPacn) 2 x mikrotik cAP ac (RBcAPGi-5acD2nD) Primary usage of ...

Search found 41 matches