I use OTG cable to connect flash usb to ccr1009-7g-1s+1c-pc and it works fine.
You may want to try another one

... I am trying to see if WinBox sees anything for the switch, whether its a MAC or IP and it gets nothing. I cant even set my PCs IP to something in the 192.168.88.0 /24 range and attempt to connect to the normal 88.1 or even 88.2 and get no response. ... I believe swos is not managed by winbox. i...

answering to my own question: this configuration works.

Thanks for response! per specs max consumption of IAP using POE+ is 20w, which is indeed more than budget leftovers on hex poe. but in real life typical observed consumption is 6w, and peak 13w. so 16w should be enough. if things go wrong way, I always can switch it to power saving mode, which uses ...

Hi! I plan to have connection like this CRS112-8P --------------- Hex POE ---------------- Aruba IAP Problem is that Hex POE will be in location without electrical outlet, hence it needs to be powered over POE by CRS112. Aruba IAP needs 802.3at. Documentation has it that Hex POE supports 802.3at out...

Hi! I have site-to-site L2TP/IPSec connection between CCR1009 over high-latency link (200ms) both running 6.46.1 one side has 30M/30M connection, another one 300M/15M. SMB/FTP Speed is pretty bad across this tunnel, so I decided to debug it: I've set up packet capture on both CCRs and ran bandwidth ...

Hi! Found that even without any load I have something keeping CPU busy on my CCR1009. home environment, one (pretty slow) internet connection, couple of wired and dozen of wireless devices. Profiler shows that "internet-detect" consumes 20-25% of single tile core. I think it's a lot for su...