Hello. It works only with linux/arm/v5: 15:22:33 container,info,debug (arm32v5) I just tested with: /container/config/set registry-url=https://registry-1.docker.io tmpdir=disk1/pull /container/add remote-image=hello-world:latest interface=veth1 root-dir=disk1/hello logging=yes dns=8.8.8.8 Results: 1...

Hello.

MikroTik support confirmed:

Oļegs Š.5 days ago 2:43 PM
Hello,

It is a known issue, we hope that fix will be implemented in next public RouterOS version.

Best regards,

Regards.

Updated to 7.17beta6 and now there is a log
container 9ae1426b-d2ed-4c77-83d5-79bad11b5f7b exited, signal: 4

Not working also:
Please check on image

Still not working: /container add remote-image=tangentsoft/speedtest-cli:latest interface=veth1 logging=yes /container start 0 [admin@HEX] /system/device-mode> pr mode: enterprise container: yes You can see log and commands in image. I guess is a problem with HEX Refresh (E50UG) itself. Any advice?

When I click "start" or run the command /container/start 0, it starts but then stops immediately. There is no log generated. I just imported the container using the following command: /container/add remote-image=tangentsoft/speedtest-cli:latest interface=veth1. https://hub.docker.com/r/tan...

As far as I know, it's a 32-bit ARM CPU. I can import the container, but it stops immediately when I try to start it. Additionally, no logs are generated, even when I activate container logging in the system/log settings. MikroTik information about the HEX refesh: https://cdn.mikrotik.com/web-assets...

Hello. I am using ARMv6 and ARMv7 container images. Example: /container/add remote-image=pihole/pihole@sha256:0f45324f7ef5cabd06170bd1f5042ca9e5aad88c531ed356b0bfeeae25eec71f interface=veth1 root-dir=disk1/pihole mounts=dnsmasq_pihole,etc_pihole envlist=pihole_envs https://hub.docker.com/layers/piho...

Hello. I am experiencing an issue where the container is not working on the new HEX refresh (E50UG). I am currently using RouterOS 7.16.1 and Firmware 7.16.1. Additionally, I am utilizing an external USB drive with a capacity of 64 GB for storage purposes. Are there any known issues related to this ...

wordpress is not working: /container/add remote-image=wordpress:php7.4-apache interface=veth4 root-dir=disk1/wordpress logging=yes 12:41:19 container,info,debug import successful, container 34429066-3c6a-4198-a04f-aebf2c64a348 12:41:38 container,info,debug WordPress not found in /var/www/html - copy...

Hello. I am using docker container in RB5009UPr+S+ with RouterOS 7.6 Some containers does not start because " Permission denied (13) ". /container envs add name=phpmyadmin key=PMA_HOST value=172.17.0.4 /container add remote-image=phpmyadmin:latest interface=veth4 root-dir=disk1/phpmyadmin ...

Good morning. I am having problems with the "Till Time" option in the User Manager. When I set the "validity" on the Profile and then assign the Profile to a user, the "Till Time" option shows "Unknown". I have read several post where some people experiences t...

Good afternoon, I have several load balancers with Mikrotik RB750 and 750G, some with versions 4.16 and others with the newest 4.17. The problem is that sometimes and appears to be randomly the CPU goes 100% for several hours or days. Here are some images. http://widuitcorp.com/mk/CPU/2.gif http://w...

Hello!! Thank you for the answers. Maybe I made a mistake espousing the situation about the PCI and the antennas attached. The provider installed 2 antennas, one on the internal card and one on the PCI. At the end, I finally solved it. I disconnected the internal antenna and attached to the PCI. Aft...

Hello Marcus, thank for your answer. I have been trying everything but the results are the same. I changed the channel, turned off the interfaces ... but the wlan2 have the same results. Even if I do a scan with each interface, the wlan2 only detect the wlan1 and other one installed at home, but if ...

Problems R52n-M with RB411AR Good afternoon, Recently I bought a RB411AR and R52n-M. The provider installed the card with only one antenna. The internal PCI works perfectly but the R52n-M is not. I can’t see the SSID (R52n-M) from any laptop around In the other hand, I can see and connect to the SS...

Hello to everyone!! :) I have some problems settings VLANs to an interface. I want to create 2 VLANs in my Local interface. [admin@MikroTik] interface vlan> add name=vlan1 vlan-id=1 interface=Local [admin@MikroTik] interface vlan> enable 0 [admin@MikroTik] ip address> add address=10.0.0.1/24 interfa...