Hi guys, Recently I upgraded my 450Gs to ROS 5.21, and to my complete surprise on few (at least 4) routing.npk package will not install. My upgrade procedure was: 1. connect via FTP 2. upload needed .npk files 3. verify in Winbox Files if packages are there 4. Reboot. After i can see 450Gs have upgr...

Yeah.

I would like to thank MT team for not supporting and not showing any real interest in my problem.

Really guys thanks a lot. Will think twice when next time buying new hardware from You.

Any help in that subject anyone?

Nothing, it's just for NAT,QoS and PPPoE.

Power is connected via ethernet port (PoE) 24V.

I have 493G (ROS 4.17 NAT+PPPoE+SQ).

Board is running fine for many days, but when I try to reboot it remotely it hangs. Looks like bootloader isnt finishing loading system. If I disconnect power supply and then connect back - RB is up and running fine (until next reboot).

Any solution for this?

I have an issue with NTP Client on RB493G (ROS 4.17). First of all both NTP package and default NTP Client doesn't work (i get only "running" message). But what is terrible, when NTP Client is enabled it causes RB unable to reboot. When I hit system reboot, RB just hangs. After disconnecti...

check my log: echo: e-mail,debug recv: 220 mx.google.com ESMTP 34sm816898yxf.65 echo: e-mail,debug send EHLO [172.30.0.2] echo: e-mail,debug recv: 250-mx.google.com at your service, [83.3.251.75] echo: e-mail,debug recv: 250-SIZE 35651584 echo: e-mail,debug recv: 250-8BITMIME echo: e-mail,debug recv...

@dormador I did try EXACTLY same config (ROS 3.28) using gmail and i get in log:

"Error sending email: AUTH fail"

any idea how to solve this?

Ok I can say that problem was solved.

mrz You were right, my default route rule was wrong.

Thank You for Your support

As for using bridge interface - I have no particular reason for that. So I removed bridge interface. In the mean time I upgraded to ROS 3.19. It seems that in few cases I have managed to establish VPN connection to the router - but it was disconnected very fast. I've changed default route configurat...

Guys please, I really need some help with this.

Here's the /ip route print detail output from my RB 433AH: Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit 0 A S dst-address=0.0.0.0/0 gateway=83.3.251.73,bridge1 interface=bridge1,bridge1 gatewa...

Hello guys! I have a problem with my VPN configuration. I'm usung RB 433AH with ROS 3.17. I'm trying to get access to my LAN (172.20.0.x / 24) using VPN connection. I configured eth1 on RB with LAN address (172.20.0.250), and I added eth2 public address (83.3.251.75/29), added default route, then I ...

Great, at least we know that this problem is common. I still haven't found any way to solve this. I'll try to upgrade to ROS 3.7, but I believe it won't help, because even thou ROS version is different, dude server in package has not been changed
(only package version number has changed).

Is there no one who can help with this isue??

I'm not quite sure if anyone else has the seen this. But my dude server (running on RB600 ROS 3.3) cannot monitor any routeros devices. Under device Settings I imput correct username & password but server is unable to cennect to remote (in the same subnet) ROS device neither using Winbox nor sim...

Hi Guys!! I have a small problem. I'm using rb333 (ROS 3.14) with dude server running and monitoring my LAN. When I'm connecting locally (from within my LAN) using winbox or the dude client, everything is ok. The problem is that when I'm connecting from outside of my LAN (via debian server using NAT...