Hello there. I like to create a load balance based on application/website, for example ISP-2 only for Youtube/Facebook/Netflix and ISP-1 for everything else besides ISP-2. I'm wondering if that's possible with RB and if it's, which method would fit better for this configuration? Yet if thats possibl...

There would be no change on ether2, so second ISP should work the same way as before. I put MikroTik and hosts in ONU ether1 subnet, but i was unable to pass traffic to ether2 ISP in that way. Anyway, I just received a better solution. After insistence of mine, ISP1 accepted to bridge ONU, so, now ...

You could bridge ether1 with ether3-5 and do something with either bridge filters or bridge's "Use IP Firewall" option. You could have common subnet with ONU for both IPv4 (you'd have one less NAT) and IPv6, and use router as transparent firewall, so your network would be still protected....

Proper workaround (which is already wrong) is ND proxy. Current RouterOS doesn't have it. There's no doubt they will add it eventually. They will have to, because too many ISPs got IPv6 wrong and it's needed. Unfortunately, no one can tell when will it happen. Without it, you'd have to do something...

Well, "IPv6 Prefix Mode: Prefix Delegate" does sound like it could be it, but it can also be config for that device, what it should get from upstream. And other things suggest that it's not for downstream. First is that RouterOS doesn't get any prefix. ;) Second is that you needed IPv6 pa...

If it gives you address but not prefix , then it doesn't look like DHCPv6-PD, only DHCPv6. With current RouterOS it's a problem, because it would need ND proxy and RouterOS doesn't have it. You can bridge everything together and demote the router to switch, but that's far from ideal. In fact, dhcp-...

Still cant found an answer for that

Hello there. I has an ISP routed ONU delivering DHCPv6-PD. Before acquired rb750GR3, i was using a TPlink router with IPv6 passthrough to connect my devices and all were able to acquiring IPv6 like an DHCPv6 statefull mode. Now with RouterOS i found no way to achieve a way to connect my hosts. When ...

I have similar issue, but if i put dhcp-client to receive address instead, then fe80::1 server provide an public IP address(2804:xxx) to my mikrotik. In prefix mode it dont receive nothing, keep searching.

I searching for an solution aswell. Any help in this would be useful.

Thanks