MikroTik

aldalil

Mikrotik ros 3.15 is hanging/freezing after some minutes of operating with the dual core.
We have to force reboot the system after that!!!
The same situation with 3.14. (we are not facing the same problem with the 3.13 but hotspot problems).

Rgds,
Alaa

aldalil

Bug in Mikrotik Hotspot: We are facing the same problem since 3.9 and now the same problem for 3.13. And that is not due to the workstation platform as we are facing the same problem with XP also, with different internet browsers. The user has to wait for some time, reboot the computer, and then it ...

aldalil

use the public IP address or change the "www service" port, you can find it at: ip>>services>>www

Rgds,
Alaa

aldalil

Send an email to Mikrotik support to add this option to you, they'll add it upon your request and under your resposibility due to countries regulatory.

Regards,
Alaa

aldalil

Hi Ali,

If you are just waiting the admin to reply, then it is better to push them an email and ask them for support !
But, I guess this is not a support issue, and all what you need as you mentioned above is sharing idea, usually testers can answer you.

Good luck.
Rgds,
Alaa

aldalil

i will wait more ideas

aldalil

Hi Ali, It depends on how much your network design is complicated and what internet access authentication is required. As you mentioned, there was no any kind of security or wireless encryption, then you can access the network easily. The internet access authentication is by assigned IP address to a...

aldalil

We are consider different ways, how you can get payment in the requested way. Do you know any system, that we can use to implement credit card charging inside User Manager ? Business-OnlinePayment: http://search.cpan.org/~jasonk/Business-OnlinePayment-2.01/ used also by the open source freeside ISP...

aldalil

anybody help me?
how i can login to mikrotik system

to use the mikrotik/ROS ! use the winbox (GUI) or telnet (console).

For the winbox, download it from download page http://www.mikrotik.com/download.html

Rgds,
Alaa

aldalil

Hi muluhngwisimon,

I don't know wat Mr. MRU adviced you ... but are you sure that it is a mikrotik ? are you able to ping alhajjan.com or yahoo.com ?

Also, did you try to connect using the same service directly from your PC ?

Regards,
Alaa

aldalil

That possible using the User-Manager. Also -using the hotspot- you'll face another problem, is to start the counter from the time the user logged in (not from the time you create the user). This is solved also in the user-manager where you the session will be started from the first log in if you nee...

aldalil

but paypal also works in most countries

But not working for Lebanon as I know

!!!!
Providing CC payment gateway support for other than PayPal & Authorize.net is highly requested.

Regards,
Alaa

aldalil

using winbox, go to: IP >> Hotspot >> User-Profile change the keepalive timeout to the desired time. for example: 5d 00:00:00 this will keep the user logged in for 5 days. But, be aware that if a user tried to login from another PC (and if no shared users , or more than one user is able to share the...

aldalil

Hi cylent, The Burst Threshold is the limit where the bandwidth if exceeded for the specified threshold time, burst is downgraded to the normal limit. And therefore, there is no burst as you are asking for after a period of time. You can set Burst Threshhold tx/rx to ZEROs, so, at any level, when a ...

aldalil

Hi braincellbuster, You are almost done for simple configuration. Using winbox, you need to add a route (Gateway): IP>>ROUTE>> add gateway & DNS: IP >> DNS >> Settings (configure the Primary and Secondary DNS) Any user on the same network, is able to use the Mikrotik router as a gateway now. But...

aldalil

Hi trottolino1970,

Check the following link:
http://wiki.mikrotik.com/wiki/Hotspot%2 ... priorities

Same scenario is working fine with pppoe

Regards,
Alaa

aldalil

Hi braincellbuster, I went through the general install and tried using Winbox to setup the a public IP, on the NIC. Since then, I can not get back into the router through Winbox. Use the ROS NIC Mac address instead of the IP address, check settings. There is a problem with NIC IP address, subnet or ...

aldalil

Hi chrone,

use a bridge-interface or bigger network subnet /16 (255.255.0.0.)

Regards,
Alaa

aldalil

Hi Ahmed, I'm the one who wrote that wiki article, so I know what is exactly written there and how to use it :) You have to think in different way, suggest the burst rate is the maximum allowed speed while the rate limit is the minimum (no CIR - or real dedicated, minimum rate assigned here if you a...

aldalil

Dear Ahmed, As per the wiki's example, x6k/y6k is the minimum speed/rate, it appears in Advance Queue as "Limit At". Changing the users profile, package needs to disconnect and reconnect the user. And that is why bursting does not need to do that manually. Other way, you have to write some...

aldalil

Hi zulhanif,

Do you have any example to post ?
Also, I'd like to know if you are using any load balancing rules or multi-gateways/routes ?!

Regards,
Alaa

aldalil

Hi Ahmed, settings are applied on the fly, so, you just need to set your profile's rates limits (max, min, allowed threshold time and priorities..). Any user belongs to a specific profile, will be affected DYNAMICALLY by the pre-defined rates limits as mentioned in the wiki article. If you need to k...

aldalil

Hi ahmedsaffar76,

You can play bursting rules with pppoe, check the following link:
http://wiki.mikrotik.com/wiki/Hotspot%2 ... priorities

Same scenario is working fine with pppoe

Regards,
Alaa

aldalil

Hi normis, I add a new wiki article about the hotspot rate limit and how to setup burst and priorities. Please check it on the following link: http://wiki.mikrotik.com/wiki/Hotspot%2C_apply_different_limits_and_different_traffic_priorities Thanks, Alaa Hi Normis, I didn't get any comment regarding ...

aldalil

Hi PingMe, what do you mean by: "to sign on other router mikrotik with nat and those things? " if your question is how to access the RouterOS server using telnet, the answer is, using windows command prompt (or run), write: telnet ip-address where ip-address is the RouterOS IP address. (it...

aldalil

Hi adaheem,

If you have a public IP, then you can access your server from anywhere !
If you want a public hosted radius server, we can provide you the service.

contact me at: alaa (at) internetvsat.com (Email and MSN messenger ID)if you are interested.

Regards,
Alaa

aldalil

Alaa Tahnks you very much!!!!!!!!!!!!!!!!!!!!! I didn´t know that I can use its in the part of speed Thank again!!! Rafael Lore Hi Rafael Lore, You are welcome .. to make it easier for other users to understand how it should be configured exactly, I just wrote a new article in the wiki to make it e...

aldalil

Hi normis,

I add a new wiki article about the hotspot rate limit and how to setup burst and priorities.
Please check it on the following link:
http://wiki.mikrotik.com/wiki/Hotspot%2 ... priorities

Thanks,
Alaa

aldalil

In hotspot profiles,rate limite: use the following string: x1k/y1k x2k/y2k x3k/y3k x5/y5 P x6k/y6k where: x1k/y1k: Rate (txrate/rxrate i.e 128k/1024k) x2k/y2k: Burst Rate (i.e 256k/2048k) x3k/y3k: Burst Threshold (i.e 160k/1280k) x5/y5: Burst Time (in seconds i.e: 60/60) Priority: P (use integer fro...

aldalil

I am trying to find out if there are any providers that can supply a Satelite link to me. I'm based in South Africa. I'm looking for an overseas provider. Would love to know of possible providers and cost/equipment and speeds. Anybody? Hi Thavinci, We are providing VSAT services for south africa on...

aldalil

hi uldis ,

is this payment method works in lebanon ?

regards

Hi skynoc,

No, Lebanon is not in the list of supported countries.. refer to the post on the following link below !
http://forum.mikrotik.com/viewtopic.php ... ll#p103160

Regards,

aldalil

"not easily", I can understand your that problem has been solved ! Thanks God

aldalil

Thanks Normis,

I got the key yesterday..

aldalil

Use the command below every time you want to add a DHCP server to the same ROS:
/ip dhcp-server setup

You can configure it the way you want, use same Interface, different interfaces Or use multiple ROS if you have multiple networks.

aldalil

I need help I have a 254 Ip-s 192.168.0.1/24 How can I configure a DHCP server with 32 subnets? All network users connected to the same NIC ? If you have grouping rules and all the 254 users are on the same network, then how you are going to assign them with no physical grouping! You have to divide...

aldalil

i guest that when i but the network card " realtik RTL8139D" AFTER configuring the network card ...i have other problem " Intel UMDNI , PXE-2.1 (build 082) Copyright(c) 1997-2000 Intel corporation For Realtek RTL8139(X)/8130/810x PCI Fast Ethernet controller v2.3 (021015) CLIENT MAC ...

aldalil

wt u mean by max share MAC there isn't any option like that......

I meant the "Address Per Mac" option, you can find it in your hotspot settings.

aldalil

If you are using the ROS as a DHCP Server & Hotspot .. the scenario will be as follows: 1- A computer connect to the network, and take a DHCP address from the DHCP server (leasing an IP address for the user/subscriber) 2- Hotspot is accepting any request, and forward the packets to be passed thr...

aldalil

For the first question regarding the Hotspot hosts: AD: Detected & Authorized. A: Authorized, but not Queue rule. PS: Binding & bypassed H , I'm not sure what is it for, I didn't notice it before .. but I guess Host. Sure not hotspot, but maybe wireless hotspot ! Not sure, you have to double...

aldalil

send your mikrotik.com user name to support@mikrotik.com

Normis, I have no reply at all from support .. !

aldalil

Remove "Ack" & no "Ack", both have the same meaning in Arabic Language that is to remove the previously acknowledged problems.

Regards

aldalil

login and logout automatically when they are in idle status or surfing the net not keeping some sessions opened !

check idle timeout and keepalive timeout options in users profile.

aldalil

You can find it here in the wiki:
http://wiki.mikrotik.com/wiki/How_to_Block_Customer

aldalil

[quote="salooomus] 2 / and here after clearing cash and cookies And this problems exists not only in my pc but in all network pcs[/b][/quote] After clearing cache and cookies where exactly ? your browser or MT Server ? Also, what is your mikrotik cache size, what cache you are using webproxy-te...

aldalil

Antialiased = smoothed
mon = Monday =)
Unack = not acknowledged

Thanks Chupaka, file has been updated & replaced by the newer translated file.

aldalil

Thanks for your reply normis, I've sent an email to the support and hope that I can find a reply by tomorrow.

Regards,

aldalil

This is something not related to Mikrotik .. What CPE wireless client mode you have ? I'm sure you are using AP station, so all subscribers connected to the same CPE are sharing the same MAC. Change it to or repeater mode if your CPE supports address4. (Sure I'm talking about P2MP scenario) But you ...

aldalil

Hi Normis,

Translated file to Arabic Language has been uploaded to the following link:
http://wiki.mikrotik.com/images/3/3b/Ar ... 0beta7.txt

aldalil

Hi Normis, I've just complete the translation to Arabic language, but I need to know if I had translated the following words correctly: Antialiased=Anti aliased or non aliased? dir= directory ? fri = Friday !!! sat= Saturday !!! tue= Tuesday !!! mon = monitor ? oper status = operation status ? Unack...

aldalil

So, you can use the same as I mentioned above ..
In case you want to use Transpaernt proxy for hotspot users, don't forget to check the transparent proxy option in the users profile. Otherwise, you can ask the hotspot users also to use the proxy and configure it manualy !

aldalil

I've started the arabic translation..

aldalil

have you ever seen this one working? because this is first scenario we tried. hs initial webpage is not well visible/partially shown and logging impossible. Hi chvdr, Yes .. it is working as transparent proxy .. if you are not looking for transparent proxy configuration, and still need the users to...

aldalil

Hi sergejs, Any update for these features .. we are looking to use them soon, adding wiki scripts for the same purpose are not working for hotspot and dynamic Queues like the dynamicaly created by Hotspot. This would allow us to provide better service for the lite users and keeping the heavy users c...

aldalil

Do you mean to allow Fair Usage/Access Policy or in other words GoS (Grade of Service Policy), and service speed will be downgraded from x/y to x2/y2 if a subscriber consumed xx bytes for a portion of time (x minutes,x hours or x days) and then releasing them after that ?

aldalil

it will be good option to end users. and i can help you with Arabic translation. voting for arabic and french languages. I hope we can find a solution to customize the user-manager pages, languages (or even add languages to use multilingual system, very useful for WISP :shock: ), and for sure chang...

aldalil

2CheckOut is a well know payment gateway and used world wide .. Not like the PayPal or Authorize.net as they do not support all countries. It supports 3rd party integration, so you just need to have a look on it and integrate it with user-manager. Check this page for more info: http://www.2checkout....

aldalil

enable ip proxy and forward the port 80 to ip-proxy port using firewall mangle (Make it at first before dynamic). Then use the parent proxy in ip-proxy

hope this could solve your problem.

Regards

aldalil

We didn't face the same problem using the webproxy-test package on 2.9.27 we didn't try to upgrade as everything needed is almost stable. Regarding disabling the proxy. I'd like to know if you are using any transparent proxy or hotspot with transparent proxy, so there will be no need to enable it as...

aldalil

Hi alex_rhys-hurn, Below is the used configs: [admin@Alhajjan] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 ;;; Local Network 10.11.12.1/16 10.11.0.0 10.11.255.255 Private 1 ;;; ISP1, server gateway 192.168.17.18/29 192.168.17.16 192.168.1...

aldalil

1- To limit the bandwidth per usage, use the following script: :local traf; /queue simple :for i from=1 to= 254 do = { :if ([/queue simple find target-addresses=("192.168.1." . $i)] != "") do={ :set traf [get [find target-addresses=("192.168.1." . $i)] total-bytes] :if ...

aldalil

Hi eebng_1422, As deleola1 said, the clients shouldn't be able to get reply from the gateway/MT server if they didn't login. Well .. in order to solve your problem, I need to know if all your clients are connected to the Hotspot server directly with wireless connection, or you are sharing some wirel...

aldalil

Hi alex_rhys-hurn,

We are facing the same problem, and we exactly followed the following wiki instructions:
http://wiki.mikrotik.com/wiki/Improved_ ... e_Gateways

I'm not sure if we have to add any other firewall rule to make it works with the hotspot !

Any idea !

Search found 62 matches