The ipv6 of ros is really too bad, even the basic use cannot be guaranteed, everything needs official attention and repair. i'd say there's a lot more to improve, but it is still superior to many other available implementations out there. and i love the flexibility it offers to me. i spent 20+ yrs ...

in reality this isn't a workaround, more like an addition. i collected packet captures from different devices, and they all respect the DHCPv6 lease time in their RA. so this two changes shall be combined. ok, there should maybe be 3 changes, as the DHCP-PD server in routeros also doesn't care abou...

When ipv6 changes, win10 can get the new address normally, but it cannot be used. It is necessary to disconnect the network port and restart. well, to me it seems to be an issue, as dynamic ND prefix entries have their valid-lifetime independently from the dhcpv6 PD lease the system used to generat...

When ipv6 changes, win10 can get the new address normally, but it cannot be used. It is necessary to disconnect the network port and restart. When can it be fixed, this problem has been for many years. Does it work after half an hour? That is the RA Lifetime defined in IPv6->ND. A known bug is that...

When ipv6 changes, win10 can get the new address normally, but it cannot be used. It is necessary to disconnect the network port and restart. When can it be fixed, this problem has been for many years. So, is this a bug in ROS or Windows? This is so annoying, my workaround currently is to disable i...

When ipv6 changes, win10 can get the new address normally, but it cannot be used. It is necessary to disconnect the network port and restart. When can it be fixed, this problem has been for many years.

Use vlan on the Intel network card 82580 interface. Tx Drops increase infinitely. There is no problem with using vlan on RTL8111.

If lowering the MTU helps it generally points to bad firewall rules that are blocking path MTU discovery. If you lower it further to 1280 and you see additional sites work that would confirm the issue. The fix would be to ensure you are allowing the correct ICMPv6 traffic through the firewall. It's...

This method is very good, win10 did get dns. However, ipv6 is still abnormal. Many websites cannot be opened or are stuck. Using Padavan's ipv6 is normal, and all websites can be opened normally. Can a friend use ros's IPv6 to access the website? Yes, the original issue is not related to DNS at all...

This method is very good, win10 did get dns. However, ipv6 is still abnormal. Many websites cannot be opened or are stuck. Using Padavan's ipv6 is normal, and all websites can be opened normally. Can a friend use ros's IPv6 to access the website? Yes, the original issue is not related to DNS at all...

Hi, RouterOS can advertise DNS with DHCPv6. You simply need to add a DHCPv6 server onto the subnet and enable the "other configuration" flag in IPv6 ND settings, you don't need an IPv6 pool etc. The windows clients will make a DHCPv6 request to get DNS servers. If Windows 10 receives DNS ...

When ROS redials to obtain the new IPv6, Win10 can obtain the new IPv6 address, but Win10 still uses the old IPv6 address.
Using another router system, win10 can obtain the new IPv6 address and can use it normally.

In China Mobile's broadband IPv6, using the ipv6 routing that comes with the optical cat and the dial-up of router systems such as Padavan can be used perfectly.
Why on ROS, win10 can't get ipv6 DNS, and most websites can't be opened, it's stuck, the website is normal after ipv6 is turned off.

winbox 3.21 scale and fonts are also ugly.

The new icon is really ugly.