MikroTik

clueluzz

Hi, I'm currently using the following in my router CCR2004 (using RoS 7.3.1); /ip firewall filter add chain=forward connection-state=new action=jump jump-target=block-ddos add chain=forward connection-state=new src-address-list=ddoser dst-address-list=ddosed action=drop add chain=block-ddos dst-limi...

clueluzz

noted. thanks Sindy!

So for my 300:120, the lowest common denominator is 60 at a ratio of 5:2 which makes 7 split into 5 for WAN1 and 2 for WAN2.

clueluzz

I came across a load balancing calculator for PCC whereby if two WANs are connected, the PCC is not X + Y. There's a way to calculate a numerator of the split in bandwidth then to be applied to the denominator in the pcc mangle. I'll attach the screenshot. This page is useful but the script only all...

clueluzz

Hi,

I have a question since all the stuff I've read about LB PCC math for 2 WAN is something like 20Mbps+10Mbps = 10+10+10.

Any suggestion on how to calculate 300M DL / 80M UL with a symmetrical 120/120M?

clueluzz

Can you advise how to use this with RoS7.2.3? I'm using CCR2004.

I've followed this https://wiki.mikrotik.com/wiki/IKEv2_EA ... d_RouterOS

My VPN connection is working to Nord but my specific client traffic is not going thru there.

clueluzz

There should be a page in WebFig to view the activity of a combination of ports (customizable), like the per port page. Screen Shot 2022-05-01 at 17.09.24.png I think this would be useful to see in one page visually (instead of the numbers in the interface page). e.g. combination of WANS, VLANs, an ...

clueluzz

Hi, I've recently gotten a second internet connection and I've succeed making my Queue Tree to manage the traffic, but it will only detect the bridge traffic (combined WAN1 and WAN2 download). Since I have WAN2 with faster download, if I set a limit to the download traffic based on WAN1 for safety, ...

clueluzz

Hi, I know that there is an option to script the router to monitor traffic (DPI, etc), I found it a little complicated to setup. Also, it requires an external software to actually monitor the traffic like ntop. I think it would be very useful for people to have a very basic data usage graph for mete...

clueluzz

Thanks SiB. Just wanted to make sure it was possible. Otherwise, it would be annoying to add a power plug just for the LtAP on some form of beam to get it above my house. Are there examples of how to set it up?

clueluzz

Hi, Recently got this switch as part of my network. Installed it (latest firmware both packages and routerboard) and noticed that it "crashes" after a couple of hours, certain devices drop from the network. At first, I thought it was the DHCP lease from my 4011 router but apparently it's i...

clueluzz

Thanks Sindy! This helps a lot.

@Mikrotik should have this as a feature in WinBox instead of a terminal search

clueluzz

Hi, Is there anyway to check the IP that a switch port is using/giving to the client without going to client side on winbox or terminal? I can check on the leases from the DHCP server but can't seem to figure out which one is using the actual port. So let's say ether10 is C4:AD:34:55:7F:AB but on th...

clueluzz

Hi,

I'm thinking of adding LtAP LTE kit as a failover to my existing network. However, I would like to power the LtAP using PoE. Since the PoE comes from my CRS354 switch, is there anyway I can still have the CCR1036 control the failover?

clueluzz

Hi, I'm trying to make a P2P from my office to my home which is approximately only 7km. The problem is I live in the suburbs and the office is in the city. I'm sure there is no line of sight. Apart from setting the wireless on 30m high, would having the same model help? I'm looking at LHG XL 5 ac on...

clueluzz

Hi, I'm very new to Mikrotik and I have yet to setup QoS on my CCR. I don't necessarily want to create limits on the bandwidth since I'm using a 500Mbps connection but I would like to arrange the queues so that certain things takes priority over others. Even with a connection this fast, if the queue...

clueluzz

+1
agree

clueluzz

Thanks @Chupaka

clueluzz

@Chupaka, this is great. Would it be correct to assume that if I were to have 3 recursive failovers, it would look like this based on your code above: /ip route add dst-address=Host1 gateway=GW1 scope=10 add dst-address=Host2 gateway=GW2 scope=10 add dst-address=Host3 gateway=GW3 scope=10 /ip route ...

clueluzz

Thanks @pe1chl. This seems more like a failover only solution instead of load-balancing + failover. If I misunderstood, can I add this to my existing settings? From reading it, I think it’s only the last part of the script I have to add.

clueluzz

@anav, If “recursive routing” is the term for it, then yes. How do I program my router to do that on top of what I’ve already scripted?

clueluzz

Hi, I currently have my RB4011iGS+ setup to have load-balancing and failover working for my home based on this video from this Load balancing and failover with multiple gateways (2 WAN Links) YouTube video. It's working great. So when both are working, load-balancing works. When I pull WAN1, WAN2 ta...

clueluzz

Hi everyone,

Got my replacement CCR unit. Now flying

Thank you all for being so helpful.

clueluzz

@pe1chl - yes it is happening on the port of ISP to my CCR. I even reset the router and started settings from scratch. Even then, while it’s trying to detect the port, it still locks to 100Mbps. And based on @LSan83’s suggestion, I tested every port with all the variety of cables I have and found co...

clueluzz

Ok, now this is getting ridiculous. I've only succeeded getting the 1Gbps that one day with that one cable. Now it won't with the same cable I succeeed with. I've since bought 5 different cables varying from Cat5e, Cat6 and Cat7 and all failed to connect to modem at 1Gbps. Combination brands of Beld...

clueluzz

Hi everyone, Solved the internet issue. Apparently it was a cable issue. Weird thing is all of my cables are Belden CAT6 but only one 3 meter generic cable was the one that got the port to connect correctly. I guess I have to be careful abt the cables from now on. Just thought I’d share in case anyb...

clueluzz

Hey guys, I got my CCR and since it will take me a while to understand this thing (and have signed up for the training), I decided to use the Quickset to get up and running for now. However, my internet is not going past 100Mbps. On my prior ASUS router, I’m reaching 880Mbps. I went into the Interfa...

clueluzz

Thanks @psannz. Looks like I’m going for the CCR1036.

clueluzz

Hi everyone, As I was about to purchase the CCR1009-7G-1C-1S+, the dealer offered me a refurbished CCR1036-8G-2S+EMv1 for a significant discount. The v1 has 16GB RAM as compared to the new refreshed version CCR1036-8G-2S+EMv2 which has 8GB. Does someone know why the 2019 refresh has reduced RAM? Als...

clueluzz

@jvanhambelgium, I have tried changing the subnet mask in my ASUS to 255.255.254.0 and the DHCP range went from 192.168.1.2-192.168.1.254 to 192.168.1.2-192.168.2.254, but don’t quite know if the router will be able to handle the additional IPs. The only “consolidation gateway” for smart bulbs I kno...

clueluzz

Thanks again @mbovenka.

I think I’ll invest in the CCR1009 for longevity so that it can grow with me longer term if I scale up my network in the future. But it’s great to know that the RB4011 can answer a lot of needs and I might use it in a smaller scale setup.

Time to order

clueluzz

@jvanhambelgium, r u suggesting I go with a consumer router? As it is right now, my ASUS AX-11000 cannot handle more than 253 clients (according to the box and manual). Unless I rethink the entire smart home automation (and I’m making sure as much of it is wired instead of WiFi dependant), I’m kinda...

clueluzz

Make the 10G uplink port on the 4011 a router-on-a-stick between the different VLANs (and internet), and you have 7.5Gbps of inter-VLAN and to-Internet routing, and your video editors and NAS can communicate at wire speed through the CRS. Thanks @mbovenka. Since this technically solves my problem, ...

clueluzz

Why you don't consider a smaller CCR, like 1009 plus a switch with all the SPF+ you need for server and clients? The 20 Gbps is only for LAN anyway. @LSan83, so the router will not affect the traffic of the switch of 10G (and/or above) traffic? If that’s the case, then I would definitely opt to get...

clueluzz

Hi, I am looking to get a new Router for my new smart home where I plan to separate all IoTs, computers and guests using VLAN. I want this router to: - provide IP for a minimal 500 clients (there are almost 250 smart bulbs alone in this house, not to mention smart plugs, etc) - 1G fiber internet to ...

Search found 34 matches

Telegram triggers DDOS? [SOLVED]

Re: Load Balance PCC math [SOLVED]

Re: Load Balance PCC math [SOLVED]

Load Balance PCC math [SOLVED]

Re: Force LT2P (IPSec) tunnel over specific WAN interface [SOLVED]

Re: Feature requests

2 WAN QoS to Local Network

Feature Request: Data usage

Re: LtAP LTE kit + CCR1036 via CRS354-48P switch?

CRS354-48P-4S+2Q+ port drops?

Re: Switch port IP? [SOLVED]

Switch port IP? [SOLVED]

LtAP LTE kit + CCR1036 via CRS354-48P switch?

Which Wireless for 10km with no-line of sight?

QoS suggestions?

Re: forget about OpenVPN give us WIREGUARD

Re: Advanced Routing Failover without Scripting

Re: Advanced Routing Failover without Scripting

Re: Load Balancing + Failover 2 WAN help [SOLVED]

Re: Load Balancing + Failover 2 WAN help [SOLVED]

Load Balancing + Failover 2 WAN help [SOLVED]

Re: Which CCR? Need Advice / Recommendation [SOLVED]

Re: Which CCR? Need Advice / Recommendation [SOLVED]

Re: Which CCR? Need Advice / Recommendation [SOLVED]

Re: Which CCR? Need Advice / Recommendation [SOLVED]

Re: Which CCR? Need Advice / Recommendation [SOLVED]

Re: Which CCR? Need Advice / Recommendation [SOLVED]

Re: Which CCR? Need Advice / Recommendation [SOLVED]

Re: Which CCR? Need Advice / Recommendation [SOLVED]

Re: Which CCR? Need Advice / Recommendation [SOLVED]

Re: Which CCR? Need Advice / Recommendation [SOLVED]

Re: Which CCR? Need Advice / Recommendation [SOLVED]

Re: Which CCR? Need Advice / Recommendation [SOLVED]

Which CCR? Need Advice / Recommendation [SOLVED]