Disable this rule: /ip firewall filter add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related But if it helps, and it should, because fasttracked packets bypass firewall, where you mark connections and routing, it will bring interes...

There's no reason why having these routes should break load balancing, if you do the connection and route marking correctly. But at first sight it doesn't seem to be anything wrong there. @sob I've took a closer look but if I set that option add-default-route=yes in the DHCP clients I loose the abi...

Router itself by default uses main routing table, so if there are no routes in main routing table, guess what happens? Correct, there's no ping or any other communication between router and the world. Only exception is connected subnets that do have routes in main routing table. So those two routes...

Nope. Click on both entries you have under DHCP client (the one highlighed blue and the other). This will bring up another mendu. DHCP is default tab so take a picture of that, and then select the TAB Status and take a picture of that. Total 4 pics. Not necessary, here you have the detail mode: det...

Well I am curious about your WAN setup then. How is that you have two private IPs for gateway and yet you use IP DHCP client. I note that you have no IP addresses setup for the wan connections. Can you post snapshots of your IP DHCP client settings (the tabs), (nothing sensitive if its all private ...

suggest time to upgrade to 6.49 latest stable firmware...................

I've already updated the firmware, but there're no changes on my configurations, no new behaviors, etc

Well I am curious about your WAN setup then. How is that you have two private IPs for gateway and yet you use IP DHCP client. I note that you have no IP addresses setup for the wan connections. Can you post snapshots of your IP DHCP client settings (the tabs), (nothing sensitive if its all private ...

To eliminate NTH and mangling disable all the mangling rules and see what happens. (dont forget to add the routes I noted) I've tried what you said before (diable all mangle rules) nothing happen, same issue I can't make a ping from mikrotik terminal, if you have a script changing all those rules, ...

Thus its your NTH and mangling. Why NTH, no one uses that to share internet If your intention is to use both connections at the same time use PCC!! Also I told you these were WRONGly formatted (and if formatted a duplicate of the first rule)> Why are they still there????? add action =accept chain=s...

anyway nothing of those resolve the issue of the ping of the router, I cannot make a ping to an external source like google.com [admin@MikroTik] > ping google.com SEQ HOST SIZE TTL TIME STATUS 0 no route to host

1. More fixes needed SOURCNAT In general you either can use the default rule ( the first one you have) OR split it up into each separate WAN, which your other two lines 'attempted; to do but the format is wrong!! Suggest the below is all you need add chain=scrnat action=masquerade out-interface=eth...

Hi @anav I did those changes, can you take a look, the thing is that it seems that my tp-link router stopped working with those changes: Here they are: # dec/07/2021 17:03:28 by RouterOS 6.47.10 # software id = E1MU-#### # # model = RB4011iGS # serial number = F03E0FA7#### /interface bridge add admi...

Hi Guys, I've a RB4011iGS (Wifi version) and IMHO the router is intended to be in a rack with ventialtion and Air conditioner so that's the ideal I think, in my country now is summer and without ventilation and air conditioner it was running like 45° Celcius, I've made a cooler base (at my own) with...

Hi @anav here are the specs from that export: # dec/07/2021 16:19:13 by RouterOS 6.47.10 # software id = E1MU-#### # # model = RB4011iGS # serial number = F03E0FA7#### /interface bridge add admin-mac=DC:2C:6E:3C:XX:XX auto-mac=no comment=defconf name=bridge add name=bridge-guest add name=bridge-tp-l...

Hi Guys, I'm experiencing a problem with my configuration, so far I've managed to: 1) Configure 2 ISPs (WAN1 & WAN2) 2) Configure a guest wifi network 3) Added a vlanXX to share internet with my Tp-link router 4) Added some mangle rules for WANs, Bridge, VLAN, and Wifi I think in the middle of t...

Hi Guys, I've finally did it long time ago, now I've a rb4011 wireless and I've managed to do it configuring the following: 1) I've created a vlan with a specific IP for the Ac1750 wifi router (192.168.xx.xx) 2) I've added as interface port 4 on mikrotik router (that connects via ether4 cable to the...

Hi guys, I'm new in the forum and I'm trying to make a configuration under my private network, I'm also new with mikrotik and I've researched a lot regarding how to configure the following: ISP > Mikrotik Router > Tp-Link (Wifi) > Clients I've reached the first part of the configuration: ISP > Mikro...