MikroTik

hahnhell

Alright, now I understand what you mean to have in the PERMITTED list. Makes sense. Onto finishing the steps in the New User Pathway to sucesss... Trying to do the OFF Bridge access thing from : https://forum.mikrotik.com/viewtopic.php?t=181718 however I don't understand what you mean by 3. Give it ...

hahnhell

Thanks for the cleanup.. I realised only after I had updated with a default firewall that you had all these fancy dandy help/how-tos! I already had my Wifi and pppoe setup so I didn't want to do that over again.. Perhaps I should have just started from scratch, hehe. I've removed the extra firewall ...

hahnhell

Hello Everyone, It's been a little while since I've played around with this stuff and I still honestly don't know what I'm doing, but I thought I would simplify what I had, start over and go from there. I used to have a really complicated setup with VLANs and I no longer feel that is doing what I wo...

hahnhell

So maybe I'm a few days late on that previous comment. Seems that RC5 'is' out already. Would someone care to comment on if I should try it or not?

hahnhell

I am not opposed to experimental software, it just didn't sound like it even worked on my RB4011 from what @anav stated a few days ago.

Yeah I had a read through I would wait until rc5 comes out too many notes of RB4011s crashing.

hahnhell

I don't require to have all traffic from Cottage routed through Home. They are only a few hours down the road from each other. If I wanted to watch something geo-locked, I would probably just cast it from my cell or something. There are a lot of big acronyms now being thrown around that have now wen...

hahnhell

Can I insert a nice rainbow here yet? "The more you know!" Thanks to @anav for pulling together the ask. I want to be able to have access to my home network from the cottage to do the following tasks: - Watch movies, play music through my Home Plex server; - Access file storage on my Synol...

hahnhell

Sindy, Thank you for the awesome explanation! I did understand it, though I'm not savvy enough to do any modifications on my own. WRT EoIP: I haven't a clue about this until it was suggested here. I'm honestly just going from the experience being given from this forum. Once it is setup, I will most ...

hahnhell

Hello @sindy, I haven't even tried any traffic from Cottage at this point. I'm just speaking from my computer sitting within the ADMIN-VLAN at home. When I have enabled what is in the latest exports, I lose access to ssh and web on certain hosts from HOME. I have some things hosted at mud.morchroniu...

hahnhell

Ok, so it's not just SSH that is mucked up. There are webpages(lots..) I can't get loaded either. what exactly in those 2 filters we added in the very beginning would do that? /ip firewall filter add action=accept chain=input comment="Accept: IPSec UDP (Internet -> Router)" connection-stat...

hahnhell

Above my head. It doesnt look right to me at all............ I'm soon gonna call the folks at the NCR helpdesk, haha. Though they don't know squat about Mikrotik, maybe I can just do some DVPNI magic. That is sort of what I want though, just like my work: login to my work laptop locally, dial up th...

hahnhell

@anav, you always find these holes in my system.. Thank you! however I don't know how to disable UPnP on Home.

On Cottage it has the 'show dummy rule' checked and not on home..

Below is Home screenshot.

hahnhell

Hi @anav. Happy Halloween!

So I've done the filter rule change a @ConnyMercier asked. I still have no IP assignment when I connect to ether8. How does DHCP from Home get to Cottage through the tunnel? Is that a thing?

hahnhell

Sorry, that's just a bit confusing. Do you want me to remove the drop all not coming from LAN and replace it with Drop: Everything Else(same spot)? Or do you mean something else. When I assigned the interface lists now I can connect to the Cottage from ether8, however no IP address yet, and no inter...

hahnhell

Cottage-Network
To do the Quick-Test :
Code: Select all
/interface bridge port set [find where interface=ether8] bridge=bridge1

Yes, and as soon as I connect the laptop to ether8, I cannot connect to the cottageRB4011 nor get a valid IP (unidentified network).

hahnhell

The SSH issue persists, but it seems it is with a particular host. I'll have to contact them and see. I can ssh just fine into other hosts. We'll leave that one there. Ref the Cottage IP range. Do I need to create a pool of IP anywhere? As soon as I assign bridge1 to a port and then connect to it, I...

hahnhell

Lots of pretty pictures in this thread now! lol.

Thanks for being patient with me.

It looks like the IP range 77 is there... I didn't configure Static IP on my laptop. I suppose this is something I need to do right, since it is still on the 88 range?

hahnhell

And the thing with SSH, it authenticates, but then just times out...

hahnhell

So, i just got this...

hahnhell

Ok, one thing I am noticing is I cannot reach b*****.sn.mynetname.net from the laptop on Cottage. I get Connection timed out.

I can get to it locally...

hahnhell

I've named the files... One is Home the other is Cottage. I did a reboot on each and took as much of the last bits as I could.

Nothing seems to be happening on cottage. I know there are a lot less devices connecting etc. but nothing wrt IPSec is going on?

hahnhell

So the SSH on 101 only is by design. It works fine up until I enable those IPSec rules. Once the IPSec Rules are enabled, SSH goes out nor do I get IPSec-Traffic to my Cottage RB4011. that was why those rules are disabled. They were when I tested the connection. If it's not visible on the Cottage RB...

hahnhell

Alright, I have refreshed everything and started from scratch. Followed the rules, moved the firewall rules on the 'home' device, and I don't seem to have got anywhere. The thing that does happen is that when I enable the firewall rules on my home device, it kills my ability to SSH/SFTP to certain h...

hahnhell

I'll have to see what's bugging out with my ssh when I do that firewall. :/

Will investigate later. I thank you both for your amazing help today! Super fast responses. I have the rest of the day with the family. I'll crack on with this a bit later.

THANKS!

hahnhell

@anav,

I just have both devices sitting here on my workbench. cottage is connected to my cellphone(using moblie only, not wifi) the other is the main house router/device. I'm using a laptop to configure the cottage one (through port 2).

hahnhell

The rules are up above in winbox. I don't know what else I'm supposed to do. I dragged them up there!

hahnhell

I went through the steps again, this is what I'm at now.

Still no luck.

Is there anything on the Cottage side we have to do with UDP? Just wondering since we didn't do anything on that part compared to 'home'.

hahnhell

by the way, not sure where in the line of all of this it happened, but it has killed my ability to ssh correctly. I was having trouble getting git to work along with VSCode with remote-SSH. Just reverted to see and it is working again. Seems to be something with my remote-host service though because...

hahnhell

I still seem to have nothing.

How exactly does this IPSec-Counterpart Bridge come into play?

hahnhell

Good morning Anav! Thanks ConnyMercier. I've moved the rules up in both devices. restarted - No joy. What exactly are the 2 ipsec policies added but not enabled? Neither are doing anything, and the cottage one has 0.0.0.0 for dest and src. I'm just trying to find things that we added that may be out...

hahnhell

When you wrote

Replace xxxxxxxxxx.sn.mynetname.net with own DNS-Name

I'm assuming you meant my HOME device.

hahnhell

Nadda, just says searching. :/ I'm not good enough at this to even know where to start. you used ipsec vice l2pt, which I don't know anything about both other than I understood the part about the shared key so I don't have to put in a password every time they go to connect...

hahnhell

Ok, so I've managed to input all of this on both devices. I'm not sure what I'm supposed to see :/ I don't feel like it is working as we haven't reached any sort of difference in the IP range of the cottage devices. I tried enabling VLAN filtering on the Cottage however it just kicks me out right aw...

hahnhell

Thanks for the quick review @anav. Wireguard looks promising! I'm sure I'll eventually be able to migrate to that. For now, 2 VLANS need to get shoved through a VPN to my cottage somehow.

Will it take more than 1 VPN? perhaps 1 VPN per VLAN? I'm just trying to conceptualise this.

hahnhell

C'mon folks, that's not fair! I just went and spent money on a nice new RB4011 which I find to be a super slick and powerful device.

What you're telling me is that VPN over VLAN is complicated and I ought to wait until wireguard is out?

hahnhell

I honestly haven't looked. I watched a couple YT videos on how to enable the L2TP VPN, but I am not sure about the IPs required. Will I need to create a second IP range within both VLAN50 and VLAN15 that will be the ones the cottage will use? That seems to me the most logical thing... But I'm not gr...

hahnhell

I really can't complain about Starlink. It has made working from the cottage a real thing! And now I can even have the whole family kicking around and able to do stuff on a rainy/snowy day.

All the more reason to get some better connectivity with the house now.

hahnhell

Man I wish I would have more time to do things like this. I have internet connectivity on my laptop that is connected to the cottage rb4011. It is getting that internet via wifi hotspot on wlan2 (2.4GHz). I've gone ahead and created my wifi interfaces the way I want them at my cottage. Now I need to...

hahnhell

Alright, RB4011 in hand. Is there a way that I can configure the new one while being here at home and then just do minor tweaks when I arrive at the cottage this weekend?

Thanks!

hahnhell

Yep, I understand it fully now. It made a bit of sense because I remember Bell used to sell there services as Sympatico. but yeah, I forgot that SN+the rest gave you the routers facing page. Is there a way to actually disable that, but continue to have the connectivity to services by using the mikro...

hahnhell

And sympatico is Bell.. and Virgin is a sub of Bell, so yeah it probably was similar before when I was with Virgin.

Thanks for the lesson! I don't look for these things anymore. Maybe I should take some refresher courses.

hahnhell

Ah you're right! Man there is a lot of simple things I keep forgetting about with this. Not that anything is accessible through that outside facing address.

Thanks for the insight. I'll do the changes above.

hahnhell

Not sure where you're finding anything about Sympatico in that file :( I haven't used/heard of that service since the 90's when I was living at my parents. I would have removed any public facing IPs if there were any in there... the only other item I see with a 76 in there is one of the MAC for the ...

hahnhell

@hahnhell The export is really Sympatic o h... you forgot to H ide S omething while E xport... Yep, we mentioned that above. I went ahead and removed the PPPoE info from my defunct Virgin Mobile services. They've been deactivated for some time now. I went back to B[H]ell Fibe, got a plan for less m...

hahnhell

Ordered the RB4011 (wifi version). I'll pick it up tomorrow and be able to install it on the weekend. :) Then I can work on learning how to extend my current network out to the cottage. I figure there will be 2 types of devices at the 'cottage:' Home_Devices and IoT. So I will need to figure out how...

hahnhell

Yep, missed that Virgin part. It's an old cancelled service, not a huge issue. I was figuring it would be best to just get another 4011. It will help with the expansion in the cottage (not so small, probably more like a retirement home). I do think that the 5009 is a bit overkill for what I need. Ha...

hahnhell

I am getting on averate 125 Mbps download and 20 Mbps upload I have 500/500 FTTH service If you mean do I have a static IP the answer would be no, but I do have my RB4011 which has DDNS enabled so I have at least that DNS that is reachable from anywhere. I've attached my current home network config...

hahnhell

Good morning everyone, I'm looking at getting some help in the design and setup of extending my home network to my cottage so that I have access to all my services from both locations. I will post my current setup when I get back home but I wanted to first know what device I should get for the cotta...

hahnhell

And, now that I changed that second to last rule, it seems to be working.

Thank you very much @anav! Have a good one.

hahnhell

I'm trying to port forward this so that I can connect to it from outside my network.

I am using the lanIP for the devices inside the network, that works just fine. I want to be able to invite others to it is the issue.

hahnhell

Sorry, I forgot to subscribe to this thread and was just waiting to see it hit my inbox... fail!

Here's my config..

hahnhell

I know this is a bit of a hijack, but i'm trying to do the exact same thing here... My port forwarding attempts don't seem to be working either. I've tried in the past, have had a complete redo of my network layout, and I still can't seem to get it working. @anav, i'm willing to take the time to lea...

hahnhell

Happy Sunday to everyone! It looks like we are winding down to the last little bits of this config. I have my WiFi all sorted out the way I want it with the cAP AC upstairs and my RB4011 downstairs. Everything seems to get a good connection now! Minor issue: It seems that my firewall isn't working a...

hahnhell

I'm not sure what I've done.. but it seems that if I turn on the dhcp-client (on the cAP AC), I can't get an IP when I connect to it. Is it supposed to be activated? When I turn it on now, it just has a status of 'searching' all the time. I changed the interface of the address to my adminvlan (101),...

hahnhell

One thing I just tried to do... I tried to update my cAP AC, through packages, and I got the error "Could not resolve dns name" I'm assuming this has something to do with my VLANs and stuff. I tried looking around a bit but wasn't able to find a good answer. I manually installed it, but wa...

hahnhell

A new day, and new successes. Ok, I had done that Wed and, as stated, was making a mess of posting things as my mind was a bit upside down. I think this was just me at the beginning seeing what buttons did... It's now off. Re-enabled. Yes! That makes a LOT more sense. Done. I would like to do some p...

hahnhell

So, I would like to say that yesterday looks like a messy day. I posted a bunch of messy things, made some errors, and overall caused more confusion than anything. I'm just posting from my phone here, so I don't have any good files or insights to give. However, I did get much of my things working ag...

hahnhell

Sorry, I uploaded the wrong RB4011 config...

hahnhell

Alright, I have done what you said wrt naming on BOTH devices. I meant to change that a bit sooner, but I forgot to.

Name changing with no spaces done.

Changed the udp tcp rules, which is set with dst port 53, is that right?

Here are the configs.

hahnhell

Here is a rough network diagram...

So accesses no longer seem to be working correctly.

I'm not actually certain I did the static IP for the cAP AC correctly either.

hahnhell

OK, so things are looking good. I can now access the cAP AC from winbox while it is connected to the RB4011. I can get the internet from the wifi provisioned from the cAP AC. What I can't seem to do anymore is access my synology(on 15.20)(through http) or my server(on 15.10)(with vnc or my homeautom...

hahnhell

ok, so my printer somehow defaulted to manual IP. I switched it back to DHCP and there it was!

haha. silly things.

hahnhell

Ok, how is this looking? I'm awfully slow at this. Can you explain the last part about /ip address? Where do you want me to assign a static IP to the cAP AC from within my RB4011? I no longer see it in my leases within DHCP... Not sure why, because I reset it back to normal, but it still never showe...

hahnhell

Just a side note.. I seem to have lost my printer in the mix. Everything else seems to be working fine, but the printer doesn't get an IP from the network. I know it used to be on 5, and now it's on 15, but for some reason after restarting, etc, it doesn't want to show up anymore.

hahnhell

Ok, I probably only partially understand this, so here goes my attempt at the questions I think I might have. How do I do IP addressing and pools on the cAP AC? Since I will have no 'admin' devices on the cAP AC, do I need to put my VLAN101? I'm not sure how to ensure that my adminpc still gets full...

hahnhell

Ok, that was a bit easier to do. I decided that one way I could get into the cAP AC was to plug my pc into port 2 of the cAP AC. Once I did that, I was able to upgrade the software to the current version. I left the 'default' configurations there. So, it's a blank slate right now... Not sure what yo...

hahnhell

So, I've tried adding the new bridge VLAN like you said, with 2 VLAN IDs and tagged to Home Bridge and 10 - cAP AC. I get the error: cAP-bridgevlan.PNG How do I edit a dynamic bridge vlan? What PVID do I give 10 - cAP AC? cAP-pvid.PNG I think you can see that I have added the other untagged ports to...

hahnhell

your gaming addiction Haha, gaming.. yeah, no. I tried to teach myself C/C++ instead. The only 'gaming' I do is fiddling with text-based games (which many are run on C). I have a retropie running for the Kids to play Pokemon on Gameboy... if that is what you want to call gaming. Also if watching Mi...

hahnhell

You're making me laugh over here, assuming I actually know what I am doing or something! The config that I have, is built from the OP Ref that you gave me, and like you said in the ref you give me, there is more than one way to do this MT stuff! That being said, I don't know how to do it at all! I h...

hahnhell

So.. How exactly do I connect to the cAP AC? I see it in my leases, it has an IP and I can see it's MAC, but neither work when I try to connect to it via winbox or through the browser.

hahnhell

Ok,

I think I got the VLAN figured out. Next will be to add the cAP AC.

Can you please have a look at the config so far?

hahnhell

That's.. not... aww man!

I have no clue how to work the cAP AC. I will make an effort to break the rest of my network and get down to 3 VLANs.

hahnhell

I think we can call it a IntRAnet of things. There is no reason all devices on the network need to be connected to the www individually. I just have them all connected through my home automation server. In other news: I suppose I should ask/provide more guidance to what I'm looking for here. OP was ...

hahnhell

DO you really need this enabled............ /ip upnp set enabled=yes /ip upnp interfaces add interface="Home Bridge" type=internal add interface="PPPoE WAN" type=external you can modify your nat rule, so it is an accept rule like the others........ clear and easy to read add act...

hahnhell

I am not sure what you guys mean about the quotation marks. I haven't purposefully done any of the sort. Anything I have named within winbox has only been normal characters only (numbers or letters). It's because I put spaces in them is why there are so many quotation marks? We can put in some `_` t...

hahnhell

Sure...........

Well, you and your thoroughness started this! I'm not gonna put a dress on a pile of crap and call it a day! ;) I know I may not have removed some of the things thoroughly, so I need some help to find all those spots.

hahnhell

Alright, since you bring it up. Let's fix that before we go any further into the cAP work. After working with these VLANs for about a year now (or maybe less), I've seen that we can consolidate a few for ease. I've decided to get rid of a bunch of these VLANs. All I believe that is required att is t...

hahnhell

Thanks anav. Appreciate the quick response.

I will probably have a few more changes to do to the network VLANs in the next few days. Hope I can pick your brain about it eventually.

Have a great night!

hahnhell

Ref: https://forum.mikrotik.com/viewtopic.php?f=13&t=159184 Good afternoon everyone, I am back again for a bit more info on how to setup my new toy; cAP ac. I would like to use this as my main WiFi device for the house as I can put it in a nice central location. I currently have a RB4011 (wifi v...

hahnhell

Hi Kittens, Dartmouth here, No way I see to replace the HH3 at the moment and I have used a hex and now a ccr1009. When the bell fiber folks came to upgrade my setup, they came with the HH3 and I said, can I get a public IP, (passthrough/bridge mode) with the HH3 and the tech said no. So my reply w...

hahnhell

Ok, just to make sure I understand what you are saying here. Remove the bridge - LAN --- I will remove/disable: add comment=defconf interface="Home Bridge" list=LAN Replace with all the vlans - LAN --- I will change all items from list=Interneet to list=LAN Add the ethernet-1 to WAN --- &q...

hahnhell

emailed to you!

hahnhell

Wow, it is taking me so long to get back to this! I haven't called the ISP yet. I wanted to first try the other option you just mentioned being without the PPPoE connection. I'm not exactly sure how to configure the switch to remove the pppoe and let it get internet straight from the ISP modem. The ...

hahnhell

Ref: https://www.virginmobile.ca/en/support/internet/interactive-guides.html It is a modem/router. and the options inside are less than desirable. There is no bridge mode/passthrough modes. Right now the way I have it hooked up, when I login to Valerie, I don't see any other devices connected. I hav...

hahnhell

I am with Virgin Mobile, sub of Bell (canadian ISPs). I have a Valerie all-in-one that brings FTTH. on eth1 of Valerie, I have the Mikrotik connected to eth1. I am using PPPoE from the Mikrotic to enable the web access. I went the PPPoE route because I thought it would help remove the possibility of...

hahnhell

Added 1- Valerie to the WAN list. Seems a bit redundant as PPPoE WAN is using 1-Valerie to connect to the internet.. No dice. so the PPPoE WAN is using port 1 which is connected to the ISP router. I don't have anything connected to the ISP router... There is the possibility that there is some double...

hahnhell

Well, I tried diff configs on that rule.. There is no pppoe-wan interface..

Admin
Internet
LAN
WAN
All
Dynamic
None

The detect internet is my fault. I forgot it on. It's set to none now..

hahnhell

can you post a complete config again or email it to me.

Emailed to you.

hahnhell

My admin PC is on VLAN101, the server on VLAN10. Note that the ADMIN PC has access to everything on the network. Oh, do tell about this mikrotik cloud ddns. Do I just use enable the cloud function within mikrotik and then some config on the dynu side? Edit: Ok, I got the CName cloud ddns working. I ...

hahnhell

Thanks for the quick reply anav, From your post, I already have 1 and 2 from previous configurations. I added the third (firewall nat) rule. I am not trying to port translate. I am able to connect to the server on the desired port from my ADMIN computer. However, when I try to connect to it from out...

hahnhell

Good Morning! I thought I would try and post a new question here as I just ran into a requirement for one of my devices. The Server that is mentioned above, I would like to open it up to the internet on tcp port 4042. I've installed the Dynu script and it seems to be working..(https://www.dynu.com/D...

hahnhell

So, I want the Server to be able to see the internet and the IoT devices to not. But I need the IoT devices and the Server to be able to exchange information between each other. MQTT: https://en.wikipedia.org/wiki/MQTT I use this for the wifi devices as clients to be controlled and report status to...

hahnhell

So I'm still working on things. I have my devices all connected and working on their respective VLANs. I can connect or not connect to the internet where I want. I have my OpenHAB and MQTT running on port 8080 and 1883 respectively on the Server 20.20. I can connect to the MQTT from my adminPC but I...

hahnhell

Oh, Derp! I forgot that one... Ok, that went and did it. Thank you!!!! I have posted the final conf for anyone that wants to see. FYI, the reason that my IoT devices are all offline is because the only item they need to speak to is the home automation server. Everything is controlled locally and thu...

hahnhell

Took me a while to find anything askew LOL.......... Fix the ones in red!! /ip address add address=192.168.101 .1/24 interface="AdminPC VLAN101" network=\ 192.168.101.0 add address=192.168.5. 0 /24 interface="Printer & Home WiFi VLAN5" network=\ 192.168.5.0 add address=192.1...

hahnhell

@bpwl,

Thanks for the great explanation! I appreciate learning how this MIMO and chains thing all works.

So, I've fiddled with it and haven't got any further. I really am not good at this VLAN thing. I await those more knowledgeable than I!

Thanks.

hahnhell

Ok, so I don't know what to ask/say. I've made all the IPs static: Synology, printer, Server, Admin, HTPC. I can connect via winbox from AdminPC, but only using IP of the RB, not using MAC. I've configured the winbox settings the way you said, but I haven't seen a difference either way. Still no int...

hahnhell

So when I change the MAC Server settings to the admin interface list, I can no longer access the device from winbox PRIOR to removing all the 88 stuffs. Once I remove all the 88 items, then I can only access through IP, and only after I manually set my AdminPC IP to 101. When my adminPC connects and...

hahnhell

Probably not included in hide-sensitive configs, but can you confirm that you have IP Service setup for winbox with your adminpc having access?? Also under tools, for mac server, that for the winbox server, ensure the vlan101 interface is set there as allowed interface Ok, I have set this. I'll upd...

hahnhell

Ok, so I've tried to configure it again and removed the 88 stuffs and fixed the items like you said. Seems i've still got some issues. So decide which will be 5ghz and which will be 2ghz. wlan1 5ghz home wifi wlan2 5ghz guest wifi (virtual) wlan3 5ghz google devices wifi (virtual) wlan4 2ghz (iot de...

hahnhell

Ok, I'm going to work on these changes. However, wrt the wlan3/4 I am not certain I know how to enable this. Yes, it is a 4-chain 5GHz and 2-chain 2GHz, but I only can see 2 wlan interfaces... Is there something I am doing wrong? I removed the backup, sorry that was me playing around! here is a pic,...

hahnhell

Alright, I've tried my best to put this all into action and it does seem that everything is almost working! I gave it a try and from my AdminPC I have internet but I'm having trouble with the rest. You can see my config attached. First thing is I can't seem to access the RB via winbox anymore. All I...

hahnhell

Good day everyone, I'm new to Mikrotik and very new to VLANs. I have read through a number of posts here and am about to start writing up my own file to implement in my home network. I am still in the learning curve of Mikrotik language so I just wanted to ask about a few of the things stated withi...

hahnhell

Default firewall rules to start. Input chain {default rules} Good morning @anav, at least it's morning here for me, TGIF. First of all.. WOW. I've been looking at trying to figure this all out for a long time now and you've just thrown something together in a day. Thank you and now I have some play...

hahnhell

The server/lab is what I use to play around with learning more networking stuffs. It's just an ubuntu pc, but I have NodeRed, MQTT, and OpenHAB (OH) running on it. OH is the central to all my home automation. So it controls everything in the house IoT. For my IoT (lots of ESP8266), I do not have/wan...

hahnhell

Hey there anav, The google doc is brainstorming but I believe you've got most things just about covered in your explanation so far. I was trying to make a diagram/list of what I saw in my head for breaking the network into pieces. Main idea is for the IoT devices to not have access to the internet a...

hahnhell

Good day everyone, I'm new to Mikrotik and very new to VLANs. I have read through a number of posts here and am about to start writing up my own file to implement in my home network. I am still in the learning curve of Mikrotik language so I just wanted to ask about a few of the things stated withi...

hahnhell

Good day everyone, I'm new to Mikrotik and very new to VLANs. I have read through a number of posts here and am about to start writing up my own file to implement in my home network. I am still in the learning curve of Mikrotik language so I just wanted to ask about a few of the things stated within...

Search found 108 matches