Hello, we had an CCR1036 and a few months ago the CPU began to reach 100% usage at peak traffic hours, this traffic is usually between 4.2 - 5 Gbps for two or three hours at night. Because of this we thought that change it to a CCR1072 would fix the problem but it didnt. Both of them were in the v6...

Dear master, Please share, my ISP is using CCR 1072 for pppoe users. We use bridge interface feature to bridging some physical interface. Pppoe service about 950 connection and 900mbps bandwidth. From beginning my router and configuration running well for 6month no issue. Starting this week my rout...

Hi almost same our Mikrotik CCR 1072-1G-8SFP+, we experience also 100% CPU but on peak hours, we have 1Gbps Bandwidth and use PPPoE server with have 600 clients I have 5 x 1G connection on CCR 1036 we mitigate this issue by separating the PPPoE service and disable connection tracking and we have an...

Hi almost same our Mikrotik CCR 1072-1G-8SFP+, we experience also 100% CPU but on peak hours, we have 1Gbps Bandwidth and use PPPoE server with have 600 clients I have 5 x 1G connection on CCR 1036 we mitigate this issue by separating the PPPoE service and disable connection tracking and we have an...

PPPoE server with have 600 clients

Hi, have you tried using Splunk to monitor your solution. I have made a Splunk program for Mikrotik and there are a section for PPPoE.
I am interest in feedback on it. See link in my signature.

Hi Jotne, we can try this monitoring tool thanks

Hi almost same our Mikrotik CCR 1072-1G-8SFP+, we experience also 100% CPU but on peak hours, we have 1Gbps Bandwidth and use PPPoE server with have 600 clients