Hello, I have attach Ether 3(myPC) to Bridge_vlan122. Vlan122 is in Bridge_manage and Brdige_vlan122. Ether1(Internet) is directly assigned to Bridge_manage. Why, when I enable "use ip firewall" and "use ip firewall for VLAN" i dont have connection to Internet from PC ? When it's...

I have two similar configurations on Mikrotik's, one of them have OS v 5, and second 6.1. When on second(6.1) I enable use-ip-firewall in bridge, i can't connect from interface ether2 to Internet. On ether2 i have untagged device(laptop). When firewall is off, everything work ok. Why it's happend ? ...

I have another MT(2) connected to ether4, but this MT(2) have port disabled. I see a big traffic on first MT(described above) in TX packet on port ether 4, why ? I expected that there won't be any traffic. Or in another way, if i have bridge with two tagged ethernet port, all incoming traffic from o...

Bridge_Manage = Bridge1 in my picture Bridge_vlan_10 = Bridge2 in my picture /interface bridge port add bridge=Bridge_vlan_10 disabled=no edge=auto external-fdb=auto horizon=none interface=vlan_10 path-cost=10 \ point-to-point=auto priority=0x80 add bridge=Bridge_Manage disabled=no edge=auto externa...

Hello, I have two bridges on MT: Bridge 1: ---ether 1(Tagged) ----- vlan 10 (MT) -------- (Tagged)ether 4 ----- Bridge 2: ----ether 2(untagged) -------vlan_wl(MT) --------(untagged)ether 3 ----------- Is this normal that all incoming traffic from ether 1 is forwarded to ether 4 ? Even if device(MT) ...

We have MT which work in Bridge mode with 4 VLAN(see attachment). When define that interfaces ehter7 and ether8 belong to Bridge_Manage, we see that on those interfaces are sent all traffic(see attachment 21,7Mbps). When interface eg. Ether5 belong to one vlan then all traffic on ether5 is normal. H...

Hi, I have cisco configured as below and connections as below. How can I forward tagged vlans packets from Cisco to MT(2) ? Is there only why is to use Bridge_Manage and add ethernet ports on MT(1) to Bridge_Manage? Cisco -> MT(1) -> MT(2) interface FastEthernet0/45 description do MT switchport trun...

Need to delete this line:
switchport trunk native vlan 367
Yes it works now, thanks.

Hello, I'm trying to setup vlan between Cisco C3500XL and MT 2.9.50, and it dosen't work. I can't ping from MT to Cisco and from Cisco to MT too. My MT config: Flags: X - disabled, R - running # NAME MTU ARP VLAN-ID INTERFACE 0 R vlan1 1500 enabled 367 ether1 # ADDRESS NETWORK BROADCAST INTERFACE 0 ...

Why if I put only rules which is below then I can see traffic in mangle but in queues no ? / ip firewall mangle add chain=prerouting action=mark-packet new-packet-mark=http-rutekp \ passthrough=no dst-address=192.168.10.249 src-port=80 protocol=tcp \ comment="" disabled=no add chain=prerou...

I think it should be easier solution.

Maybe once again:

IF ( traffic on marked_packed_1 = true )
limit traffic on marked_packed_2
ELSE
traffic on marked_packed_2 is unlimited
END.

I don't need to use Queue Tree only if it's need.
Is only solution is what Chupaka wrote ?

Thanks.

Hello, I know how to limit transimission on queue but those queue is always limit. How to do it only when some other traffic exist ? How using mangle and QOS i can acomplish this task: IF ( transmission to 80.80.80.80 = true ) THEN limit transmission speed on some queueX in Queue tree to 1mbit ELSE ...

example above is speed limit for P2P

This is a example how to QoS P2P traffic: /ip firewall mangle add chain=forward connection-mark=!p2p_conn action=mark-packet new-packet-mark=other /ip firewall mangle add chain=forward p2p=all-p2p action=mark-connection new-connection-mark=p2p_conn /ip firewall mangle add chain=forward connection-ma...

When someone run P2P program he create many connections and then ma VoIP services have poor quality. I think better solution to block P2P is to limit maximum number of connections then speed connection.

But is it possible to block number of connections ?

Hello,

Can anyone help me to create queue in which I put adresses from 192.168.0.0/24 class? Queue should block user(one IP) when he make more then 100 connections per seconds ? Is it possible to block connections when one IP create 100 connections ?

Thanks

So is there any chance to receive SSID and frequency from mikrotik using SNMP ?

Thanks

Why my MIB SSID and Frequency dosent work ? [admin@xxxxxxxxxxxx] > interface wireless print oid Flags: X - disabled, R - running 0 R tx-rate=.1.3.6.1.4.1.14988.1.1.1.1.1.2.4 rx-rate=.1.3.6.1.4.1.14988.1.1.1.1.1.3.4 strength=.1.3.6.1.4.1.14988.1.1.1.1.1.4.4 ssid=.1.3.6.1.4.1.14988.1.1.1.1.1.5.4 bssid...

Hello, I found that ssid have OID: ssid=.1.3.6.1.4.1.14988.1.1.1.1.1.5.4 but nothing found: root@xxxxx:~# snmpwalk -Os -c public -v 1 192.168.69.34 .1.3.6.1.4.1.14988.1.1.1.1.1.5.4 root@xxxxx:~# other mib: root@xxxxx:~# snmpget -c public -v 1 192.168.69.34 .1.3.6.1.4.1.14988.1.1.1.2.1.8.0.80.141.237...

Hello,

Can someone post example how to give highest priority to one host eg.192.168.8.8, and all other connections lower priority? It's need to priority VoIP traffic.

Thanks
Pawel R.