Can someone explain why in 3.6 it is no longer possible to specify a source address for telnet connections?

Is /routing filter only in the routing-test package (2.9.x)? I'd like to prevent OSPF distribution of select networks that are connected to a few of my routers. If I can do this only with routing-test, can anyone give me some tips on what to watch out for? I'm looking especially for problematic expe...

I set up a couple of hotspots last night and I'm receiving a ton of web-proxy logs from one of them. I have six other hotspots running that do not send me these logs. On all the hotspots, /ip proxy is disabled. /ip web-proxy isn't there, although the webproxy-test package is installed and enabled. T...

hautespot, Did you ever find anything out about these? I was getting them very often from one of my hotspots, but not from two others using the same RADIUS server. The difference between this one site and the other two is the circuit utilization: the problem site was swamped, with ping times to the ...

changeip: no, this happens on routers that have been up for weeks or months. andrewluck: yes, that's enabled. The state tracking generally works; this happens sporadically. I'm still collecting firewall logs to see if some pattern emerges. Also, possibly related: even with these rules checking conne...

The problem I'm seeing is that packets that should be going through the forward chain are being dropped in the input chain. Those packets are part of connections from my internal segment, which are NAT'd in srcnat with the masquerade action. The dropped packets have the external IP of the router as ...

I have three rules at the top of my input and forward chains for dealing with connections based on state: drop invalid, accept established, accept related. I'm using masquerade on customer traffic coming in via ether2 and out via ether1. In my filter logs, I see drops on the input chain for traffic ...

Users cannot pass traffic. More specific, sometimes users work fine, sometimes they don't. Getting about 20-30 simultaneous users, using cookie and chap auth (had mac auth enabled, but turned it off last night).

I have hotspot running on a wds bridge interface (ros2.9.43), on a RB532 w/64MB. It works pretty well, except that when it gets up around 30 or so active users, new connections cannot be made from additional users. The connection tracking max-entries is 110592, but total-entries never climbs up over...