sdcard on modem e3372 can't detected by mikrotik

still memory leak on my hap ac3 after few days and rebooting itself

This version make my hap ac3 bootloop

check your ram, its exhausting ?
my hap ac 3, ram is exhausting on version 7.1.3 each 7-8 days and reboot itself

N.B.: @Hominidae suggested "hybrid" approach of using both /interface/ethernet/switch config and /interface/bridge with vlan-filtering enabled. This kind of setup is not very common (and AFAIK is not supported by Mikrotik at all), is not very well tested and might cause some unexplicable ...

i'm added pvid vlan 10 on bridge port wifi2 (wifiwave) still didn't get ip from dhcp with configure vlan on switch menu As already said, you need to use vlan-filtering=yes for the wifi interfaces to work with VLANs...but only these. You maybe could combine things. Use one ethX as trunk for the wifi...

Unless you enable vlan-filtering on bridge, all of VLAN settings on bridge ports (pvid included) are ignored. Do you use your hAP ac3 as a full-blown ethernet switch? As already mentioned, l2hw offlload doesn't do much unless you have considerable traffic between members of same VLAN connected to d...

no, why...you could still add the wifi interfaces to the bridge, but configure the ethernet ports via the switch menu: https://help.mikrotik.com/docs/display/ROS/Basic+VLAN+switching#BasicVLANswitching-Otherdeviceswithabuilt-inswitchchip The wifi ports do not support hw-offloading anyway. i'm added...

...but you cannot configure the WiFi/Wave2 Interfaces/SSIDs VLANs in the switch menu, can you?

so, I have to wait until this feature can be used in the next update ?

Configure bridge with vlan filtering and add wifi interface with PVID set. You don't have to configure anything regarding VLANs on wireless interface. One should do VLANs on RB4011 this way even if wireless is not in the mix, it is not possible to do it differrently ... BTW, this method works for t...

guys, can you tell me how to configure wave2 with vlan mode ?

Romon not working under ROS v7.1 long-term with switch mode, tested on hap ac3 to rb2011 as trunk

After upgrade from v6, IP Translation Hotspot didn't work on v7

Multiple Parent Queue User Profile Hotspot didn't work

translation address or to-address in hotspot didn't work, i have client with address 172.16.0.2 with to-address 192.168.1.2 it's not work after upgrade from v6 to v7