MikroTik

Hi @theymans,
I'm having exactly the same issue (Orange surf extra card & Chateau LTE6), where you able to fix it ?

Hello bavos, could you contact MikroTik Support so the team could check that and see how to solve it?

Please contact the MikroTik Support. If you have done that already post the SUP case number.

We will to some more tests together with LMT to see what could cause that.

EG18-EA module that is used in the LHG LTE18 can do up to 5CA (up to 100mhz spectrum) and that is with 2x2. Of course not every country/operator supports that. Please see the Carrier Aggregation spreadsheet file that is available int he LHG18 download page: https://mikrotik.com/product/lhg_lte18#fnd...

hi how did you update? is the name of the file you got from quectel support is this "RG502QEAAAR11A04M4G_01.001.01.001"? I used the built-in firmware update commands as shown in the screenshot in post 12 . Unfortunately, it was only after Salvot2990 mentioned that I noticed the wrong mode...

Same problem on my Chateau 5G. I think modem update is broken on it. I also have Chateau LTE12 and modem update works OK on it. Chateau 5G CA (Carrier Aggregation) is unknown. There is no publicly available list of possible CA combinations. I made support request for CA list but never got a reply f...

We have confirmed from few customers that the RouterOS v7.0.1 test that was provided for the LMT fixes the SSH issue as well.
This fix will be included also in the RotuerOS v7.1beta3.

Hello zxpower, please contact LMT support so they could update your router with the new test RotuerOS version that could potentially fix this problem. If that doesn't help then please provide some information how we could reproduce this problem locally. We could try to reproduce this problem locally...

Did you set the use the external antennas? The signal could also change if i changes to another cell tower or band/frequency. Is there a way to have the modem use external antenna only? I have an external 2x2 panel but when I move the router in another place of the room the signal changes a lot so i...

Try to ask the LMT operator for real Public IP. Maybe they offer you this as well:
https://bizness.lmt.lv/en/real-ip-address

Is there any way we can get an LTE12 version of the LHG LTE? I know there is an LTE6 version available, but I was wondering if I could just buy an LTE12 mPCI card (which one?) and swap it out in an existing LHG LTE. Or does anyone know a good RB + LTE12 mPCI + antenna combo which would give the sam...

SiB, that's because there is no miniPCI in there. Two possibility options: You enter into M.2 socket to start new era or Perfect MikroTik New Hiper Super LTE Category devices base at Quactel EG12/18 and EG20 and all in Global version.... and we start became innovative again... You integrated SoC wi...

I get the same error in mbim mode. Anyone have an idea? Support asked me to try "at+cfun=1". Sometimes takes few tries or I am just impatient, but it seems to fix the internal error. But the fix is temporary, until you make a change affecting modem or LTE interface or reboot. The problem ...

What settings you have for the lte interface?
Look in the Cellular tab on the LTE interface to see in which lte band it connects and if is uses CA when connection is established when doing data-transfer.

We would like to understand if the OpenFlow protocol is still in the use for the network operators and if there are lot of use-cases where is it widely used and if there would be benefits that we could upgrade the OpenFlow implementation in RouterOS from v1.0 to v1.3? Or we need to look for newer ve...

1. There are total 4 antenna connections for the CAT12 modem and for 2 antenna connections you can change from internal to external antenna - you can configure both antennas connectors separately (which will be external and which internal). For the TX only the main (first) antenna is used - which ca...

R11e-LTE6 supports inter-band CA and contiguous intra-band CA.
R11e-LTE6 doesn't support non-contiguous intra-band CA

R11e-LTE6 already supports that. Consult with the wiki:
https://wiki.mikrotik.com/wiki/Manual:I ... gh_Example
We are now working to add that also for the Chateau LTE12.

My SXTR & r11e-LTE6 in 56s uptime do a at+reset by himself, and other person give confirmation that is done by ROS itself.
This is like a "build-in feature".

at+reset is is sent if you have chosen specific bands as the module needs to be reset to allo to use only specific LTE band.

Got the LTE logging topic

Go to the System Logging section and add new entry with topic LTE.

please add the LTE logging topic and disable/enable the LTE interface and check the log why it isn't connecting.

WeWiNet , please write to support@mikrotik.com with the description of your problem. If I understand that you don't have any CellLock command used - just regular configuration? Setneuf , it looks like the signal might be too low for the Band20 LTE. What signal you were getting with the regular LTE ...

is it happening for only that device or also other 4g kits experience this problem?
Please contact support so we could get support output files and logs from the device.

We plan to introduce IEEE1588 PTPv2 feature for some of the CRS317 series switches. At the moment we plan to add support for the IEEE1588 PTPv2 Boundary clock which can be operated by transport layer2/udp4 and possibility to choose the delay-mode end-to-end/peer-to-peer. Support for the 802.1AS (gPT...

Please set the modem to the MBIM mode using AT command and when it boots up in the RouterOS, make a support output file and send it to support@mikrotik.com so we could check if we can load the MBIM interface.

have you tried to enable only Band20 and disable Band3 - does it connect that way?

I have LHG LTE device with SIM Croatian HT Mobile. Mikrotik can connect to network on band 3 or 20. Problem is I can't ping any wan ip mikrotik (I have done nat, no firewall, route,apn..) for example 1.1.1.1 or 8.8.8.8. But very strange is that mikrotik self can donwload and upgrade firmware and ge...

LTE band 31

upvote band 43

R11e-4G module supports Band31 and Band43 already

B42/B43 support would be really great for us in Canada. The Mikrotik CPE options look very nice, it's hard to find good CPE options in this band. The built in EPC would also be great, since EPCs can get very expensive. Another useful feature would be layer 2 bridging between the base station and CP...

Uldis, What are the other LTE bands are plan? timeframe ? , We'd buy some band 40 (2.3Ghz) now.... All depends on the demand and the requirements. a consultation where I can quote sim card equipment You can buy them in bulk (empty SIM cards) from various supplies in the internet and even from the C...

Hi, I am quite interested in this product. I already have a complete B38 system with an 2-sector eNodeB and EPC. I have seen that you can connect it to an external EPC, so that's good. What about VoLTE support ? Will we be able to link it to an IPBX ? eMBMS support ? Multiple Bearers ? Is the user ...

Any other bands than band 38 + 39? Which bands you need? The B38 can also support part of B41 and B39 can support part of B33 via Band mapping. Uldis, I imagine that it could be awhile for Mikrotik to make a decision on this, let alone the development, and additional time to see final equipment. Sh...

Uldis,
What are the other LTE bands are plan? timeframe ? ,
We'd buy some band 40 (2.3Ghz) now....

All depends on the demand and the requirements.

Is the 5 GHz issue with RB4011 fixed ?

Newer generation iPhone/iPad issue will be fixed in RouterOS v6.44

b48 easier to license in eu countries.. what is the performance of that lte ""wimax"" product? :) no info regarding speeds We will see on the other bands when we will release the current series but it is possible that we could look at 3.5ghz bands. All depends on the demand. As ...

what epc would have to use to deploy my network? We will have built-in EPC on the base station but you can also use some external one. Maybe someone here on the forum can suggest some open source or commercial EPC. I understand that the built-in epc can only handle 32 clients we have updated the sp...

what epc would have to use to deploy my network?

We will have built-in EPC on the base station but you can also use some external one. Maybe someone here on the forum can suggest some open source or commercial EPC.

This InterCell is not really for WISP. It is for companies who want to operate LTE cell towers, either for public or private reasons. Yes, you probably need a license from the regulator. These InterCell devices only support data (no voice calls, except whatsapp/skype etc over data connection). The ...

3550 - 3700 (CBRS) works great for people in the USA. https://www.fcc.gov/wireless/bureau-divisions/broadband-division/35-ghz-band/35-ghz-band-citizens-broadband-radio Eventually you'd need a software feature for the radios to talk to the SAS (spectrum access database). It looks like we could make ...

We currently use Wimax in Canada in FWA Band ( 3.5Ghz Fixed Wireless Access ) and having LTE in this band ( LTE Band 42 ) with your hardware will be nice. We currently use FWA Band D ( 3475-3500 ) and H ( 3575-3600 ) --> https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf09311.html More information ab...

Any other bands than band 38 + 39?

Which bands you need? The B38 can also support part of B41 and B39 can support part of B33 via Band mapping.

In this MikroTik newsletter: - new 8 x SFP+ port switch CRS309-1G-8S+IN - new wAP 60Gx3 60GHz Sector Base Station - new low cost 60GHz CPE LHG Lite60 - InterCell - LTE Base Stations, preorders available - new active direct attach 5m cable - RB4011 rackmount ears - MUM schedule - MUM Europe 2019 in ...

So the requirements are TDD BAND 48 with 1W output power. You need only one cell (20mhz) 2x2 MIMO or you need CA support 20+20mhz (2 cells)? About unlicensed 2.4ghz - which LTE band you are referring? Is it TDD BAND 41? If yes, maybe you could tell more which exact frequency range as the current B3...

We currently use Wimax in Canada in FWA Band ( 3.5Ghz Fixed Wireless Access ) and having LTE in this band ( LTE Band 42 ) with your hardware will be nice. We currently use FWA Band D ( 3475-3500 ) and H ( 3575-3600 ) --> https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf09311.html More information ab...

Could you give us more information about the EPC? And how about the SIM Cards and antennas, are MikroTik thinking about that as well? Thanks We will be update the software and now we have updated the specification and the built-in EPC will support up to 256 clients. About the SIM cards you will be ...

Unfortunately we can't make the Product that supports both B43 and B48 so you would need to choose which one you would need. ` This doesn't make sense to me. The two bands overlap and all of your competitors who have beaten you to market already manufacture such base stations that support both band...

Unfortunately we can't make the Product that supports both B43 and B48 so you would need to choose which one you would need. Any other requirements - output power, CA support, bandwidth width, etc...? B43. Output power as high as possible. We use this band esp. where 5GHz does not work out. 10/20MH...

Such an interesting turn. LTE can be beneficial for WISP though - NBN (National Broadband Network) in Australia are using LTE for their Fixed Wireless roll-outs, however being government run and funded probably got access to frequencies within budget. A country I do a lot of work in - we have a ver...

we would need more info on the SAS database on the CBRS and that PAL license. Maybe you could share us that info so we would understand what needs to be implemented before making such base station for 3.5ghz in US.

From the LTE band list I can't find the band that is from 2400-2500. Maybe you know some product that support that so we could look what band it is? http://niviuk.free.fr/lte_band.php When we would make a BaseStation for 3.5ghz we would need more detailed which exact band is the most used that users...

Unfortunately we can't make the Product that supports both B43 and B48 so you would need to choose which one you would need.
Any other requirements - output power, CA support, bandwidth width, etc...?

So the requirements are TDD BAND 48 with 1W output power. You need only one cell (20mhz) 2x2 MIMO or you need CA support 20+20mhz (2 cells)? About unlicensed 2.4ghz - which LTE band you are referring? Is it TDD BAND 41? If yes, maybe you could tell more which exact frequency range as the current B38...

You can't "use them". InterCell is a base station that can be ONLY used if you are a licensed mobile operator. And if you are, you need to buy the license for B38 anyway. For Germany only 3,5GHz was licensable for regional WISPs. This moves to 3,7-3,8 which renders our WiMAX Equipment use...

Some MNOs might find those boxes handy. However, in Europe I expect most MNOs have licensed parts of band 34 (came as by-product of 2.1GHz UMTS) instead of band 39. I wonder how these boxes get synchronized (necessary to run them with coverage overlapping). Yes, this product mostly is for module op...

Currently products supports only TDD Band38 and Band39. You need the LTE Base Station for 3.5ghz? For which country and which exact LTE bands Band 42, 43 or 48? Also what other requirements you have like output power, any other hardware/software features? Here is info on the LTE bands: http://niviuk...

In short, if you live in the EU and want to conform with the rules, you MUST use regulatory-domain and country name. It will enable DFS radar check and correct power output depending on chosen frequency. If you have some special permission (!) to use other settings, select "no country set"...

You can try to enable 80+80mhz option so your old clients would be able to connect as well. You can do that by selecting 20/40/80mhz option with specifying the secondary channel. You can leave the secondary channel auto so it finds the best channel. But again, it all depends if your clients support ...

to which version you downgraded?
Could you provide a support output file from Beta version when it doesn't work and also from the downgraded version where it works.

check the "IP Socks" configuration if it is enabled on that port.

what happens to the lte connection when the internet doesn't work for a while?
Please enable the "lte,!raw" logging topic to see the output when it happens.

You can use this feature to provide the Static IP from the LTE to the device in the ethernet network
https://wiki.mikrotik.com/wiki/Manual:I ... gh_Example

You can also use the new cell-monitor command in the latest 44Beta releases to see the neighbour cells information - works only from the console and only when the connection is established with the tower.

please contact the support@mikrotik.com and we will provide you with a test LTE firmware v010 to test out as we have some issues with some other Band3 towers not connecting.

unfortunately we are still unable to reproduce it locally. Maybe you could disable the encryption - use the wireless connection without encryption. Use 20mhz channel width. Then use another AC router and start the wireless sniffer on that channel. Connect with iphone xs to the AP using AC and then t...

SXT LTE kit isn't designed to open and change the components as the case will be damaged.
There are a microufl connectors on the pcb where the antenna ports are connected which can be used to connect to external connection.

enable the system logging topic "lte,!raw" and then check the logs what does it report.
What APN are you using?

netispguy, thank you for sharing us the information. For now we are unable to reproduce the issue, the websites opens ok, the, speedtest is ok as well. Do you have ipv6 also running or just IPv4? Which DNS server you are using - some local one from the Router our some other public DNS? If you try to...

By saying the local traffic works - it works with multiple hops inside your network (no NAT/Masquerade)? So as soon as the traffic goes over the NAT/Masquerade you start seeing the problem? It is possible the problem related to the TCP traffic as the L2TP VPN uses UDP protocol. We are now trying to ...

Confirmed. I have been facing the same problem with SXT LTE kit on BAND 3. 6.43.4

Please contact support@mikrotik.com and we will provide you with a test firmware for the LTE module that should fix this problem.

R11e-4G card is mainly for the new bands that are missing in the R11e-LTE card. The new bands are 31,41,42,43.
Also note that R11e-4G card doesn't support 3G and 2G.

please contact support@mikrotik.com about those issues so we could isolate them and provide a fix for each of that.

which RouterOS version you were using before when it was working?

Try disabling Advanced tools package, then reboot and check again how far will it go in the dial up sequence.

please provide us more detailed info and send a support output file to support@mikrotik.com
What wireless protocol you are using?
How are you testing the speed/capacity?
How often do you see this problem?

SXT LTE (1st gen): 1) On device startup it does not populate the route list correctly (does not add the LTE interface subnet in the route list). Have to disable/enable interface after startup so it would work correctly. 2) Passthrough interface option now showing in the LTE APN's section. Does it w...

Please enable the system logging topic "lte,!raw" on the LTE router and make a support output file from the LTE router and the Host router when host router looses the IP address.
Send the support output files to support@mikrotik.com

You can only use one sim card at a time.
So you need to change the sim cards in the software when you want to switch to other sim card.
Modem will reset during the sim change.

please enable the system logging topic 'lte,!raw" and after the lte connection is established do the scan. Then Wait till it responds with result or error and make a support output file. Then download it form the router and send it to support@mikrotik.com for inspection.

It can't happen as it stores the configuration of the slot.
The change happens after the reboot?
Can you easy reproduce it?

R11e-LTE doesn't report RSSI values in LTE mode so we can't show that.

We have found out that sometimes the R11e-LTE modems fail to get an IP address in 3G mode using RouterOS v6.42.7 - we will fix this problem in the next RC and then push that change to the Current release.

we will ad soon an option to scan for the neighbour cells so you could get info for the locking.

Use this page how to lock the R11e-LTE international version to a speciffic cell:
https://wiki.mikrotik.com/wiki/Manual:I ... and_Tricks

Enable the system logging topic "lte,!raw" and check the Log why it isn't connecting.
Please make sure that you have specified the correct APN.

Currently I don't see the Sierra MC7455 card in the supported list:
https://wiki.mikrotik.com/wiki/Manual:Peripherals

Most likely you would be able to use it as PPP emulation mode with speed limit of approx 25mbps. As MBIM support for newer Sierra cards would be implemented only in RouterOS v7.

Try to use the latest Current RouterOS version. Does your cell tower supports Band3? The tower uses 10mhz bandwidth so the max download speed is 75mbps on this tower. So this speed is shared among other users that are connected to the tower. As you can see the CQI value is very high so you are close...

please make a support output file and send it to support@mikrotik.com

please make sure that you have upgraded the RouterOS to the latest version as there were some usb fixes for hac ac2.

please try to upgrade the R11e-LTE cards firmware to a newer one and then try again. Please contact the support@mikrotik.com to get newer firmware for the card.

Please enable the system logging topic=lte.!raw and then disable/enable the interface and when it fails to connect in the 3g mode make a support output file and send it to support@mikrotik.com

Please try to follow this article for resetting the device:
https://wiki.mikrotik.com/wiki/Manual:Reset_button

Thuke82 , please make sure you have plugged the SIM in to the correct SIM slot. You can change the SIM slot in the 'system routerboard sim" menu. tnakir , how are you powering the device? Please make sure you have specified the correct APN as sometimes with invalid APN it would not connect to ...

changing band for the R11e-LTE-US is not supported. It chooses automatically the LTE band. You can only disable the 3G mode and leave only LTE mode enabled.

I am looking for M2M (machine to machine) compatible devices for mikrotiks.

Does the ltap mini LTE or the WAP LTE Kits are compatible?

If not does anyone have some more experience with such a product?

Thank you in advance

What exact features are required for your M2M communication?

the device supports only one SIM at a time, so you can switch between the SIM cards.

dc2, try to lock the modem to use only LTE network mode.

you need to reset the board configuration then. Please follow this manuals section "Resetting the RouterOS configuration":
https://wiki.mikrotik.com/wiki/Manual:Reset_button

you can add the log=yes option for the drop rules to see if the CAP connections are dropped by the firewall or not.

please use the Console interface for configuring the port setting for the SMS.

you could try to upgrade the LTE firmware to v008 but the firmware upgrade should be done via active LTE connection.
See attachment how to do that. Please do that fromt he ethernet side of the WAP LTE board.

Router doesn't have a wifi module - just LTE.
When the connection in the Quickset LTE menu is established does it shows the signal in there? If yes, then it should also show that signal using the LEDs.

is the LTE connection going down at the time when the ping is not working?
What is the firmware version for the LTE card?

did you get the IP address from the LTE interface and in the router the LTE interface has R (Running flag) and the LTE status shows the signal for your LTE connection?

currently no new update on this feature.

please contact support@mikrotik.com and include a support output file from your router.
When the module connects successful does it connect to the 3G or LTE band?

I am having the same issue with the same piece of equipment. I keep hoping the latest update will resolve it but wireless interfaces just stop after a given amount of time/traffic. Do you see the AP broadcasting SSID? Disable/enabled of wireless interface doesn't help? What wireless configuration y...

What do you guys mean? It is much better than SXT LTE first generation: Yes, but today nearly every cheap smartphone supports LTE-A at 1000Mbps/150Mbps down/up and you are still using old 150/50 modems. What about LTE bridge mode, is it supported now with SXT LTE kit? Currently we have upgraded th...

wAP AC: With 6.43rc12 a user was able to connect with its Huawei smartphone. Now with 6.42.3 he is unable to connect at all, neither with WPA2/EAP nor with open/unprotected SSID. There´s no entry within the log when he tries to connect. After upgrading to 6.43rc12 he can happily connect again. Is i...

After upgrading to 6.42.3 I had lots of trouble with the Wifi on my CRS125-24G-1S-2HnD, clients kept being deauthed which I believe is more a side effect of the SSID not getting broadcasted :( Downgraded to 6.42.2 and immediately it started broadcasting the SSID and my clients (17) popped back in a...

make a support output file and send to support@mikrotik.com

from which version you made the upgrade?

1. You can enable the ROMON on the wap lte and RB2011 and connect via ROMON to the wap lte.
2. Add a Vlan interface (for the management) on top of the ethernet on the wap lte and rb2011.

You can use the wifi now since you don't have access to the ethernet to configure the board.

we have also made a small graphical accessory guide for the WAP LTE kit (WAP R):
https://i.mt.lv/routerboard/files/guide ... 104404.pdf

Does this problem happens also on the RouterOS v6.43rc version?
It happens on both 2.4ghz and 5ghz wifi?
Only disable/enable helps?
Could you make support output file at that time and send it to support@mikrotik.com

Unplug the modem, power off the board, then attach the modem and only then power on the board.

The flash size on the wAP is too small for our application. We have 900+ installations on 951G hardware. Future plans wilkl require us to support an LTE interface (US, Verizon, bands 2, 4, and 13). A wAP R 2nD -LTE would be a very satisfactory platform except for the limited flash size (16MB) since...

In RouterOS v6.43rc12 we will have a called-station-id-type setting in the wireless security profile and in the CAPsMAN AAA section where you could specify what to include in the called-station field for the radius client. By default it would be MAC:SSID and you will be able to select just the MAC o...

that speed test is going to one client or to all clients together?

v6.43rc6 RB921G AC to SXTsq AC in left - 802.11 - 20MHz 2x2 AC - 100Mbit stable in right - NV2 TDMA 2ms or 3ms - 20MHz 2x2 AC - 10-80Mbit extreme unstable this is not funy. Add to 802.11 CSMA disable and let it go. NV2 is bad. We no longer have the quality of wireless. https://ctrlv.cz/shots/2018/0...

If the SIM position is placed fine then you could unscrew the center screw and slowly slide/open the board. Then check on the bottom side if the all the SIM PINs are ok (not bent too much or damaged/broken).

@Uldis, so can we expect any kind of fix for this poor station performance under nv2 on ar7240 chips in a future firmware release? Or are we SOL? We are still trying to reproduce your setup and at the moment we are unable to do that - it works ok in a room setup. Maybe you have a test site where th...

configure the APN Profile in the LTE menu to not to add Default route and DNS.

I have hap lite /smips/ with 6.41.2 . With 6.42 in station mode and WEP security /40bit/not work - can not connect. I downgrade to bugfix 6.40.7 and everything is fine - the routrboard is connected !

What is your AP - also RouterOS or some other equipment?

Add me to the list of disasters with the 6.42. I also have an OmniTik 5HnD. With 6.42 running nv2 with about 15 SXT5 lite clients, the ping time went crazy, super jittery with a lot of timeouts, plus I couldn't maintain a winbox connection to the SXTs, winbox file transfers kept failing and overall...

All those tests are made with the same wireless frequency?

scan could take up to one minute - please wait till it shows the results.

make sure you have sim card inside.
Try to enable the lte,!raw logging topic and check if the dial sequence works ok.

Looks like the lte card is damaged - contact for the RMA of the unit.

We do not plan to release Windows drivers. This LTE card is made for the RouterOS.
You might try to enable the lte,!raw logging topic and try to manually send the AT commands in the same sequence as RouterOS does but we can't guaranty that it will work such way.

Note that with the new changes if you have client with bad connection now it would not effect the performance of the whole AP. Now if both good and the bad client downloads at the max speed will result not in equal data amount to each client but the equal download time spent for each client. Also wi...

Please try to upgrade the AP to the latest v6.42RC version as we have made improvements to the Nv2 PTMP setups.
Here is the link to the topic:
viewtopic.php?f=21&t=132181

What happens is you use nv2-qos=default and second test what happens if you use dynamic-downlink instead of fixed-downlink mode?

done [Ticket#2018032022005404] RE: router reboot V6.42r [...]

This kernel crash is fixed in v6.42rc49.

In the setup we had a R11e-5HnD as AP and Clients was SXTsq Lite5
In BAND - N? Channel width? 40Mhz? TDMA = 2ms or AUTO? More info about config please...

band=5ghz-a/n channel-width=20/40mhz-Ce un TDMA - 2m

In the setup we had a R11e-5HnD as AP and Clients was SXTsq Lite5

need working passthrough on a SXT LTE (rOS 6.41.2 stable) --> https://forum.mikrotik.com/viewtopic.php?f=2&t=113562&p=644608#p644608 SXT LTE doesn't have pass-though support. but why? is it a software limitation or is it because of hardware boundaries?? this is a pitty, because the SXT LTE ...

In the pictures below you can see the differences without and with the Nv2 improvements. TX and RX tests are done separately. TX is total/combined download speed from the AP to the clients.

before.png

after.png

We have made a potentially significant improvement for wireless Nv2 PtMP configurations in the latest 6.42rc46 version release. Upgrade of the AP is required to the new rc version, clients can still use the old version. Edit 18.04.17, now changes are merged to MikroTik RouterOS 6.42 version. We stro...

Regarding nv2.

Do we update clients and ap or just ap?

All the changes are on the AP side so you need to upgrade the AP. Client version can stay the same.

APN configuration is moved to the Interface LTE section - there is a button APN Profiles. There you can create multiple APN profiles and then choose that in the interface lte.

There is a list of all LTE networks: https://en.wikipedia.org/wiki/List_of_LTE_networks But there a so many bands etc... it is better to produce the LTE modems for the region you are going to use. Yes we know that. Usually you can't add so many bands supported into one LTE card. As usually the limi...

Please ensure that Passthrough mode is supported in your future LTE products! Why does this work only with those crappy usb sticks and not with your own LTE hardware?

We will try to make sure that all our future LTE product will work work with the Passthrough option.

We would like to know our customer wishes and use cases on what kind of future LTE technology would be interested in? 1. Which LTE Category you are interested in most - CAT6, CAT7, CAT9, CAT11, CAT12, CAT16 or some other? 2. Which LTE bands and which Carrier Aggregation combinations should be suppor...

LTE firmware upgrade is for the International version and not for the US version.
For now we would suggest to upgrade the RouterOS.

do you have another board where you could check if the card is working?
Could you check if the card doesn't get too hot?

Has anyone successfully connected the RouterBOARD wAP R-2nD with the Mikrotik included R11e0LTE-US cellular interface card to a Verizon LTE network here in the US? if so, wereLTE card or Mikrotik ROS updates required? SIM card was pulled from a working cellular interface from another operational de...

you need a LTE card with GPS function and then you can install the gps package and use set-system-time option. And then you can use the NTP server to distribute the time.
https://wiki.mikrotik.com/wiki/Manual:System/GPS

Which WPA2-EAP method you need to use as a client?

Hello, can I get any info about this? Why was this change made? *) wireless - updated "Czech Republic" regulatory domain information; Czech republic has implemented the EU plan and band number 61 in this document is: 5725-5875MHz Non-specific Short-range devices 25mW e.i.r.p. The non-spec...

Hmm, problem. I upgraded my 3 hAP AC from 6.39.3 to 6.40.6 .. All seemed OK but the office W10 laptop refused to connect to the wifi ... To bad there is no useable logging, the MT logging just says station leaving and the W10 logging says "unable to connect" ... I donwgraded to 6.39.3 and...

need working passthrough on a SXT LTE (rOS 6.41.2 stable)

--> viewtopic.php?f=2&t=113562&p=644608#p644608

SXT LTE doesn't have pass-though support.

FOR ME 6.42rc24 (testing) WORK!!!

We will try to release v6.42 soon with all the changes.

For the WAP LTE that needs a user authentication there is a need for a LTE firmware upgrade to v008.
Please see the attachment how to do the LTE firmware upgrade. The LTE firmware upgrade can only be executed via active LTE connection as the LTE modem is connecting to the firmware server.

Nstreme-plus is almost the same Nstreme protocol but with some additional tweaks to get better compatibility with latest ARM based wireless chipset hardware that we started to release recently.

After upgrading from version 6.39.3 [BugFix] to 6.41.1 and then to 6.41.2, my device [RB751U-2HnD] presented wireless connectivity problems. I also upgraded the firmware, leaving it equivalent to the ROS. The causes of the problem could not be identified in the logs. Even after resetting and redoin...

please note that changing the nstreme settings will not effect the 802.11 wireless protocol performance. There is some other changes that could increase the speed. We haven't seen such problems you have. We have tested the map lite and it utilises the both chains. Did you try to point the map lite i...

*) wireless - fixed incompatibility with macOS clients; What problems exist with macOS clients? Which OS X versions are affected? ( I'm running 6.41 on all CAPs and have no issues being reported by OS X clients...) If you were setting priorities for the WMM then sometimes the macOS clients didn't a...

So its my understanding that the new hap ac has wave 2 support? Does that mean that the driver does as well? i.e. does it support all features of wave2 already or will that come at a later stage? Can the AP transmit to multiple clients on different spatial streams simultaneously? Currently we don't...

In the passthrough mode the interface doesn't work for local communication. But you can create a vlan interface on top of ether1 and connect to the router via that or connect via wireless interface. You can also try to enable the ROMON as that will work on the ether1 and then you can connect to the ...

Version 6.42rc5 has been released. : *) capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces; : How many CAP interfaces are we talking about? More than 100 CAPs. I setup a new controller (coming from the CHR release) with an RB1100AHX4 and put new CAPs (wAP AC, H...

maybe you could try to install a RotuerOS version on a USB stick and check if those USB devices are recognized in the RouterOS.

Version 6.42rc5 has been released.
:
*) capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
:
How many CAP interfaces are we talking about?

More than 100 CAPs.

Could you write more detailed - you need lte mini-pcie card that support only Band 31 (450mhz) or you also need the card to support multiple bands?

which exact AT command you want to use?
Most of the standard AT commands are supported by the R11e-LTE card.

Could you make a picture of the setup how you connected the RB14eu to the board and also the external USB cable?
Do you see the USB interfaces in the system when you connect the USB cable?

It seems I have similar problems. Did you find a solution?

Which problem exactly you have?
We have fixed in the recent 6.42RC versions where the CAP interfaces were removed and added back if it looses connection and tries to reconnect for multiple CAPs at the same.

For LHG ac you need to use ARM architecture files - we will update the download page.
We are working on the issue for the ARM based wireless for NV2/Nstreme.

WAP LTE KIT with R11e-LTE supports the the IPv6.

I have a bootloop after upgrading my hap ac lite from rc2 to rc5...

What configuration you had on the hap ac lite?

currently we don't have support for the IPv6 using the ME909s-120 using existing lte emulation driver.

please be more specific about this problem. 1Mbps data-rate is valid for B/G/N standard. But in the picture the 1Mbps rate was used 6hours ago with low signal and since then it is not used. What kind of wireless client it is? What is the distance setting? What RouterOS version and wireless settings ...

My static ports in all bridges just disappear after reboot on CAPsMAN controller router. RB2011UAS-2HnD ROS 6.41rc61. Also on SXT ac, clients are diconnected from time to time (every few minutes). In rc56 was perfect. New bugs? Do you have support output files from older RC where the static bridge ...

if you still have problem getting the LTE interface to recognize, please report to support@mikrotik.com with a support output file.

it looks like more problem with the LTE connection as there is no indication that the data connection is closed. It looks like the connection is switching all the time betwen some LTE Towers. You can try to leave the ping running and check when it stops working. What is the signal of the LTE connect...

New customer - same problem. What appeared to solve the problem last time, does not work now. This setup differs in the way that I put the wAPac as capsman, and hAPac as cap (last time it was the other way around). Both selects 5180MHz for 5GHz. For 2GHz the select different channels. Apparently a ...

wap lte kit supports that feature:
https://wiki.mikrotik.com/wiki/Manual:I ... assthrough

CAPsMAN doesn't support WEP as it is considered insecure.
Roaming will also work with regular APs that are bridged within the same switched network.

Maybe you can use the TR-069 for centralized configuration?
https://wiki.mikrotik.com/wiki/Manual:TR069-client

This will be fixed in the RC53 or RC54

disable the 2 and 3 stream HT basic rates (mcs8-23).

please contact support@mikrotik.com about the sms sending issue and include the support output file.

Hi Uldis, After reading all posts in this, I'm quite worried. I just bought wAP LTE Kit as a solution for improving my LTE internet connection. If I understand well, the kit will not get me 40Mbps. This is very disappointing for such an expensive equipment! Is this true? My carrier is NOS here in P...

Hi, I'm having kind of same issue. When trying to send SMS (/tool sms send lte1 ... ) I get timeout error: [lte,error lte1: no response] [gsm,error sms send failed: std failure: timeout] Is this related? I'm running the latest RouterOS stable version: v6.40.4 Thanks Enable the gsm,debug loggin topi...

there are no big changes since v6.40.4. What CAPsMAN configuration you uses and what does it say in the log file on the CAPsMAN and CAP?

could you tell us more detailed about which features aren't working?

Vendor asking for our IMEI numbers. Is there a possible range for mikrotik cpe?

Many Thanks

Please email to support@mikrotik.com we will provide a list of IMEI numbers.

Changing imei number is illegal.
Let us know how can we help you to get the SXT LTE approved.

I get an A on all networks.

Is there nothing available to lock it to a specific network or tower? Or set a priority for specific towers?

It is possible to lock to specific tower with specific AT command. You can email to support@mikrotik.com and we will provide you with more info on the command.

which modem interface you use on the board?

CQI index is used only for the LTE. It looks like you have connected to the 3G tower.
We just represent the list of the scanned networks. On different LTE modems you don't see the A for the scan command?

(MAKE ONE BETTER MIKROTIK! specs: dual-band ac, gigabit lan and one usb port please! )

We are constantly working on new products

in the quide there is mentioned: "It is possible to use external antennas for the modem, two SMA mounting holes are provided next to the reset button, or if you prefer to attach antennas to the case directly, SMA antennas can be mounted on the bottom of the case if you remove the two plastic ho...

CDC_NCM is in our to-do list but I can't comment when we will start to work on that.

Here is the quick-guide how to change the antennas. https://i.mt.lv/routerboard/files/wAP-LTE-wg-171003121743.pdf Try to point the lte antennas in cross-polarization. Also watch the signal reading while adjusting antennas. You can remove the glue and attach different (higher gain or directional) lte...

Here is the speedtest from a local cellular provider also running on Band3. Signal readings: earfcn: 1300 (band 3, bandwidth 20Mhz, cqi 13) rsrp: -76dBm rsrq: -10dB sinr: 20dB It could be related to the signal as your RSRP is very low. You could try to adjust the board location to get a better signa...

In future we plan to introduce CAT6 or faster LTE category products but I can't provide any ETA on such products.

what speed you are getting from the wap lte and from the usb modem? What LTE category your USB modem supports? Try to compare which band each unit uses as maybe the wap lte connected to different bands or cell tower. Got similar question here, with ZTE MF286 modem that provider gives on same spot i...

what speed you are getting from the wap lte and from the usb modem? What LTE category your USB modem supports?
Try to compare which band each unit uses as maybe the wap lte connected to different bands or cell tower.

on which board you test that?
Check if the usb port is added under system ports.

try to increase the dhcp server lease time to 1h or more.

Search found 3446 matches