That sounds weird. Do you switch to fixed rates both on client and the switch? If both ends are set to auto negotiation, what rate is actually chosen? If the adapter is set to auto nego, it goes to 10GBE. Until now I am still figuring out this problem. 10GBE local speeds work fine. Just the interne...

When in simple "bridge mode" (all ports in one bridge, no vlans etc.) the bottleneck will be not the CRS but rather your router. Thanks. When in bridge mode, its abit funny. If I am running 1GBE I get 800 up down. If I set the network adapter to 10GBE, I get a drop in speed. 130 up down. ...

How can I use it as a switch only? Which means the IP address follows my current router. I don't really understand the question, but I guess yes, you can use your current router for routing, nat, firewall, dhcp server, dns etc. And CRS will do switching between LAN devices on speeds up to 10Gb/s. A...

If you use it as a router - no, you can't. But you will get full internet speed, if you use it as a switch. And some router that can handle 800/600 connection - as a router. How can I use it as a switch only? Which means the IP address follows my current router. Thanks in advance! Sorry I am still ...

It's a switch, not a router, so it has only very limited routing capabilities:
https://mikrotik.com/product/crs312_4c_ ... estresults

Which means I can never get my full internet speed with this switch?

But when it was on bridge mode, I was getting a good 500 up and down.

Could you export the config hide sensitive data?

Sent from my SM-A705FN using Tapatalk

I am also facing internet issues.

My true internet speed 900 up 800 down

If I am connected to the mikrotik, I only get 300 up and down.
I tried fasttracking but so far no avail.

Could you export the config hide sensitive data? Sent from my SM-A705FN using Tapatalk # jul/15/2020 22:46:00 by RouterOS 6.47 # software id = 8AUA-YJN6 # # model = CRS312-4C+8XG # serial number = - /interface bridge add name=bridge1 protocol-mode=none /interface ethernet set [ find default-name=et...

Hi all gurus!

My CRS312 is setup but I am having super slow transfer speed across 10GBE lan devices.
We have 3 workstations running 10GBE & 1 QNAP that supports 10GBE. I am only getting a 50mbps - 100mbps per transfer over 10GBE.

Any ideas?

Regards from the land of Arizona!

In Winbox: Menu->Bridge->Ports Select interface to be removed and click on "-" minus sign In CLI: /interface bridge port remove [find where interface="ether9"] Thanks! So far sorted with internet. But there is one problem Currently my internet is limited to 300mbps up down. When...

The WAN interface (ether9) must not be part of the bridge config, must be totally removed IP address for LAN should be assigned to bridge interface, not sub/slave interface ether1 I am too having this issue. How do I remove ether9 from the bridge config? I am super new to Mikrotik swtiches and havi...