OK. Problem area halved. It's User Manager, or it is the firewall not allowing "input" access to UDP port 1812. Radius Server is not responding for hospot configuration. Please @bpwl How to sort out this issue definitly in routerOS 7 ? Please help! Thanks. (WhatsApp : +226 05 28 42 65)

[*]if the client eventually wants all sites in the same LAN segment but he wants the traffic to pass only between ether2 of the HQ site and a particular BO site but not between two BO sites, you can use the bridge horizon function.[/list] Dear sindy, I've checked my configuration again. I'm now abl...

To prevent traffic from being forwarded between two ports of the same bridge, set the same horizon value for both. E.g.: /interface bridge port set [find where interface~"eoip[23]"] horizon=1 will prevent traffic forwarding between eoip2 and eoip3. It's well noted. At the HQ, below is the...

Now, to make client traffic passing through Eth2 at HQ, do i have to bridge all 24 EoIP interface with the Eth2? Yes, exactly, as suggested above. Add-ons can be applied: if the client eventually wants each BO site to be reachable via a different VLAN at ether2 of the HQ site, you would activate vl...

Now what i want to know is : how to pass all the 24 tunnels through the Eth2 ? Supposing I've understood what you actually wanted properly, make a bridge and make eth2 and all the EoIP interfaces member ports if that bridge: /interface bridge add name=eoip-bridge /interface bridge port add bridge=e...

Depends on the configuration but at HQ: - Each EoIP tunnel needs a unique "remote address" and unique "Tunnel ID" - In firewall, input chain, allow GRE protocol (if using public ip address [remember traffic is not encrypted] else if using internal ips check if the transport tunn...

Hi, When i've tried the below, tunnels are seen to be running at remote site but not seen running at HQ. 1-I've created the EoIP tunnel at each remote and HQ with their respective tunnel ID. 2- At each remote I've created a bridge in which i've put the EoIP interface and Eth2. 3- At HQ i've bridged ...

Hello team, I am a network admin for one ISP. I'm trying to connect 24 remotes site to a HQ using EoIP for a client because the requirement is a layer2 connectivity. 1- My ISP link ends on Eth1 of each Mikrotik 2- i would like to use only 1 interface (Eth2) at HQ side. 3- At each remote site interfa...

Hello team, I am a network admin for one ISP. I'm trying to connect 24 remotes site to a HQ using EoIP for a client because the requirement is a layer2 connectivity. 1- My ISP link ends on Eth1 of each Mikrotik 2- i would like to use only 1 interface (Eth2) at HQ side. 3- At each remote site interfa...