MikroTik

FiiMitch

It's not possible. mDNS is a link-local multicast protocol and therefore cannot be routed by design. The only workaround is to broadcast it into another network segment using a repeater or similar.

FiiMitch

they are letting it slowly dying. Stable versions > 6.45.9 still heavily bugged. Not 64-bit support. Graphics and menus very confusional. We are migrating all to other monitor applications, it's completely unusable. Sad. Using 6.48, performance has been flawless, no issues whatsoever monitoring hun...

FiiMitch

It would help to see the Hairpin NAT config you've implemented

FiiMitch

The first thing about using multiple IPs on single interface is answer to the question: how does link peer (i.e. ISP router) deliver packets using those IP addresses?

Good point, I took the liberty of assuming the subnet was routed to OP by the peer (ISP).

FiiMitch

Couple options here: You could use netmap similar to this: https://forum.mikrotik.com/viewtopic.php?t=107311 You're just using the Public addresses routed to your service in place of local IPs. Alternatively you could set your router up as the gateway of a DHCP server in the Public IP subnet (of whi...

FiiMitch

There is many ways to achieve this, to determine the best, please let me know how the router is learning about the IP address that you wish to add to the address list. Is the router handing it out to the device as a DHCP lease?

FiiMitch

It went up and down like a toilet seat at a Chinese buffet today and I can't figure this out! Thanks for the laugh lol Didn't see it mentioned anywhere in the thread - has the ISP replaced their modem at any point? Also do you have a spare port on the hEX S which you can reconfigure as the WAN to s...

FiiMitch

To check as it wasn't clear - is the RouterOS device which you are attempting to connect to running the same firmware version as the RouterOS device which is running Dude?

FiiMitch

Your setup sounds correct, therefore there must be some other unmentioned config interfering in IP connectivity between your phone subnet and chromecast subnet.

Please do /export hide-sensitive file-anynameyouwish and post the config here.

FiiMitch

In the following, you've put "name-vlan30", it should be "name=vlan30". The terminal will make you aware of syntax errors as you enter commands, please pay attention to these. You can learn more here: https://help.mikrotik.com/docs/display/ROS/Command+Line+Interface [admin@MikroT...

FiiMitch

Manually upgrading the firmware is the easiest solution, however if you want to work out where along the line your connection to Mikrotik's servers is being blocked, run a traceroute.

FiiMitch

There's the Proscend SFP module - https://shop.duxtel.com.au/product_info.php?cPath=24&products_id=488 They get a little hot and my tests show they don't perform quite as well as a Draytek Vigor 130 in bridge mode (and they're the same price). I use one at home but I only have a 25/5Mbps connec...

FiiMitch

I like Mikrotik.
I dont like SDWAN.

You're on the right forum.

And the wrong thread.

+1 for zerotier

FiiMitch

Interesting read, good article and breakdown.

Very difficult to develop solutions to problems that manifest due primarily to PEBKAC

FiiMitch

https://wiki.mikrotik.com/wiki/Manual:Peripherals

This what you're after?

FiiMitch

You're not the only user experiencing this: viewtopic.php?f=1&t=164823

Looks to be a bug with the beta firmware, multiple reports and no known solution as yet. Wait for patch.

FiiMitch

I've installed countless Mikrotik routers using VDSL modems for nothing more than modulation and hardware bridging. Can you specify: - The make and model of the modem you are using - How you have configured the bridging - How the ISP is terminating the connection i.e. PPPoE, IPoE, DHCP - What Mikrot...

FiiMitch

Your welcome. I forgot this topic otherwise I would provide the workaround earlier. At least I mentioned it here four years ago...

Honestly surprised this bug still appears to be an issue this far along. Seems relatively simple to resolve in an update.

FiiMitch

Even this still happens, I implemented dynamic connections removing script scheduled once per minute so this silly behavior doesn't bother me anymore. /interface l2tp-server remove [/interface find dynamic] The clients reconnect again immediately and get the static bindings correctly. I am also exp...

FiiMitch

Could you do:

/interface wireless print

And paste here.

FiiMitch

How have you specified the in interface for the dst-nat rule?

Have you got both WAN interfaces in an interface list and are doing the rule using that?

FiiMitch

Info can be found here:

https://wiki.mikrotik.com/wiki/Manual:W ... eudobridge

FiiMitch

Post your config using:

export hide-sensitive

FiiMitch

/tool e-mail send to=me@server.com subject="Something" body="Blahblah";

Give a man a fish and he will eat for a day.

Teach a man to fish and he will eat for a lifetime.

FiiMitch

Run the script using terminal and it should tell you where exactly in the script it is failing. To do this: /system script run [/system script find name="YourScriptHere"] It will most likely output something like "error on line 5 column 12" or similar. Guessing it's the spaces ar...

FiiMitch

I was also looking into this and discovered that mDNS Reflection appears to be possible using Ubiquiti EdgeRouters: https://help.ui.com/hc/en-us/articles/3 ... S-Repeater

Disclaimer, I have not tested this.

FiiMitch

Why don't you use Powerline Ethernet adapters instead of Repeater? I've seen a PWR-Line option in the interface for the mAPs - can anyone confirm that these can be used as an ethernet handoff to an access point using the powerline to connect back? Crazy how many features those little devices have f...

FiiMitch

I wouldn't advice to anyone to use upnp. It is easy and it works but it opens security holes into otherwise safe network.

Agreed. Find out what ports are needed and setup the NAT as necessary.

Allowing devices to open whatever they like wherever they like is asking for trouble.

FiiMitch

Restricting registration according to signal strength as you suggest is certainly the best solution. Especially considering apple devices are notorious for hanging on until connection is lost almost completely. Are you worried about the wireless connection between the main router and extenders dropp...

FiiMitch

Both WANs will be online and connected, but should not be doing any load-balancing. Also I should say the solution I mentioned only fails over if the gateway itself is unreachable (not the internet). For a more in-depth solution see here: https://forum.mikrotik.com/viewtopic.php?t=146384 If you'd pr...

FiiMitch

Please read up here first: https://wiki.mikrotik.com/wiki/Manual:Interface/PPTP
Examples are included to assist you in configuration.

Then come back and ask specifics.

FiiMitch

Not entirely sure if I understand the question, but RouterOS does support OpenVPN - admittedly not UDP or LZO compression.

Hopefully you can find your answer here: https://wiki.mikrotik.com/wiki/OpenVPN

FiiMitch

No need to use scripting for this, WAN failover can be handled using route distance. If your WAN is currently injecting a default route into your table - disable this and add a static default route for each WAN using it's IP as the gateway. Increment the routes depending on which is primary, seconda...

FiiMitch

Although not immediately apparent, you can enable and disable the multicast querier setting on your bridge interface using the following:

interface bridge set "yourbridgehere" multicast-querier=yes/no

You can find more info here: https://help.mikrotik.com/docs/display/ROS/Bridge

FiiMitch

+1 for this, much needed for inter-VLAN Chromecast discovery and casting. Any hope for this feature in a future release?

Search found 35 matches

Re: mDNS equivalent using PIM

Re: Is dude still maintained?

Re: Hairpin NAT behavior

Re: Configuring Subnet of WAN IPs for NAT

Re: Configuring Subnet of WAN IPs for NAT

Re: How to add IP automatically to Address List? [SOLVED]

Re: WAN Link Dropping [SOLVED]

Re: The Dude can't connect to RouterOS devices

Re: MikroTik and Bonjour Services

Re: Multiple ports in a VLAN

Re: Unable to update firmware - Request suggestions

Re: DSL Modem Routers

Re: SDWAN using Zerotier

Re: Script Blocking LOL

Re: ASK [need link]

Re: Profile Issue on hEX

Re: Script of automatically updating gateway address at routes

Re: L2TP Server Binding + Dynamic L2TP Interface duplication

Re: L2TP Server Binding + Dynamic L2TP Interface duplication

Re: DHCP all zeros 00:00:00:00:00:00 on MAC address

Re: Harpin Nat

Re: After enabling multicast-helper mt wireless bridges dont work anymore

Re: pptp client mikrotik hap ac lite

Re: Script doesn't works

Re: Script doesn't works

Re: mDNS and WoL across VLANs

Re: Repeater Mode

Re: Mikrotik router setup?

Re: Repeater Mode

Re: Have another WAN as a backup

Re: pptp client mikrotik hap ac lite

Re: Openvpn package

Re: Have another WAN as a backup

Re: IGMP Querrier in ROS

Re: Feature Request: IP Multicast Routing/mDNS/Zeroconf/Bonjour