I have a problem with an x86 PC and atheros cards. I have a pc that I am running MT3rc6 on with two miniPCI slots on a riser card. Seems to have the same behavior with any Atheros card (SR2, SR5, SR9, CM9, CM11, EMP-8601, EMP-8601 and WLM54G. For example, when a EMP-8602 card (AR5006xs) is loaded in...

We have still not figured out what the problem seems to be. Any suggestions?

We have a hotspot gateway issue with RADIUS that I can't figure out and was hoping someone might have an idea of what is wrong. RADIUS server is Radiator and has the mikrotik dictionary installed. The hotspot gateway sits inside a firewall and the radius server outside. If the firewall is removed an...

We have been successful in only getting mikrotik to associate in station-wds mode with a mikrotik router running in ap-bridge AND with wds enabled. If wds is not turned on, then station-wds will not associate. The problem we are trying to solve is to make a "universal" client bridge that w...

I have been trying to create a client bridge using MT, not a client router, and have been finding some strange behavior. Paired with an off the shelf Linksys, Engenius, Netgear AP or a Linux box with Madwifi, I have built a client which uses Station-WDS mode: Configuration details are: CM9 radio mod...

The following cards will support turbo mode under 802.11a: EMP-8601 (new) SR5 CM9 EL-5354 The following cards will support turbo mode under 802.11g: EMP-8601 (new) SR2 CM9 EL-5354 SR9 (down converted will only support up to 18Mbps so really no point in using wide channel width) The EMP-8602 does not...

Upgrade to current release of MT...fixed in 2.9.25 according to this thread

http://forum.mikrotik.com/viewtopic.php?t=8299

Question regarding extra-channel support: On a MT 2.9.27 system on a Wrap.2c (i386 build) licensed for extra-channel support we have seen that the EMP-8602 cards, which use the AR5006x chipset (AR5413) only support the default 802.11 US Regulatory Domain channels in both b, g and a band operation. H...

We are seeing the same issue in high noise areas. Our builds are using MT 2.9.27 on Wrap.2C with the EnGenius EMP-8602. It appears that when there is lots of noise (high traffic on designated channel or adjacent channels), these cards will behave strangely. Most notible is the deauth disconnect. We ...

Trying to set up a Mikrotik router as a VoIP h.323 gateway where it is routing traffic back to a remote gatekeeper over PPTP VPN. Having problems getting the VPN to work properly. I have setup two DHCP subnets 192.168.0.0 and 10.0.1.0 in mikrotik router for wireless access. 192.168.0.0 is a "pu...