Got another test from mine as well, first one had some spare antennas of different gain db, now changed to all the same. Updated the wiki guide to include this image. http://wiki.mikrotik.com/images/7/70/802.11n-speed-mikrotik.jpg Omega-00, If you reduce your Signal strength to values around -40 ~ ...

Hope you have sorted this out already. Anyway, just to help some other researchers.... and give some more directions on this question.... The console uses the serial0 as default. If you want to access a device on the MT command line, you need first to disable the console. To confirm: >port print you...

What about the /tool sigwatch? It says we can monitor the dtr, rts, cts, dcd, ri and dsr pins. I would understand that the hardware has them all.

http://www.mikrotik.com/testdocs/ros/2. ... gwatch.php

Hi, Thanks cmit!! Yeah! I can access the serial0 from any PC (with Virtual Serial port Emulator installed) on the network. I can successfully hyperterminal to a Relay connected to the serial port on a remote RB433AH. The problem I am facing now is that the solar power regulator turns its serial port...

Was thinking to create a virtual tunnel with high QOS to dedicate some bandwith and associate the serial ports to a bridges on both sides. Have not tried yet... Will... ...later tonight. I am installing a solar power regulator up the top of the hill tomorrow and need to monitor the consumption of th...

I have roughly 30 Mikrotik p2p links (using RBs 433AH), where I need serial connections. Some of those connections are over a single hop and others over multiple hops to a server. I would like to connect (like) virtual tunnels to the serial ports, so it can send and receive data between 2 serial por...

Hi, I might be experiencing similar issues. I have one laptop which connects to the radio via Winbox... already configured, wireless connected.... everything running... I can see the interfaces and must of the configurations...... but the wireless frequency and Security profile are not there... even...