MikroTik

cklee234

Not really

At least this does not work in V7

https://mikrotik.com/product/R11e-5HacT

I requested a support ticket but so far not yet able to make it work.

Only the system recognised it

cklee234

I mean the same certificates and settings work in iPhone/iPad and non Ventura MacOS

cklee234

here is my /ip ipsec export /ip ipsec mode-config set [ find default=yes ] use-responder-dns=no add address-pool=Xauth_Pool address-prefix-length=32 name=Xauth split-include=192.168.0.0/16 static-dns=192.168.118.1 system-dns=no add address-pool=IKE2-Pool address-prefix-length=32 name=IKE2 static-dns...

cklee234

Hi,

Is the certificate marked as trust in macOS?

What is your setting on the mikrotik?
Code: Select all
/ip ipsec export hide-sensitive
Regards,

Certainly I trust the certificates already

cklee234

With username/password + certificate?
With certificate only (User Authentication: None, Machine Authentication: Certificate).

I use certificate only

cklee234

Yes, I am unable to connect

cklee234

V7.8 rc2 fixed an issue in rc1 that CAPSMan not able to bring up 5G wifi in RB4011iGS+5HacQ2HnD

cklee234

I have configured my routerOS for ikev2 server using a CA certificate and .p12 files. It works well with iphone, and MacOS. But when my Macbook air M2 comes, the same files did not allow me to connect. The Macbook air now comes with MacOS ventura 13.1. Not sure what I can do at the macbook to allow ...

cklee234

What do you mean with "when I move back the configure from my other x86 routeros"? You restored a .backup file?? Do not do that! Backup files are only for the same version and the same hardware. The only way to transport configuration information between devices is using /export. Thanks f...

cklee234

I have tried the latest v7.7 in my J4125 and 6 i225-V NIC. Routeros came up and all interfaces should support to 2.5G. However, when I move back the configure from my other x86 routeros. Without WAN connection, it seems ok. But once I plugged in WAN, it had random reboot due to kernel panic. A suppo...

cklee234

I got a missing 5GHz A/N/AC wireless available under CAPSMan after updating to V7.7rc5.

It restored when I reverted back to rc4.

All APs (ac2) do not install wave2 nor I install wave2 into the CAPSMan router.

cklee234

It seems the previous issues in beta 8 and 9 of restarting CAPs have been resolved. CAPsMAN and wireless now are stable

cklee234

I can't set or get the disk name on my hap ac3.
Disks now have slot, as their name. This will be included in Winbox in future releases.

/disk set 0 slot=...

This issue brings in problem in starting containers. All I need are to re create and do some minor configurations

cklee234

I can only go back to v7.6 stable

cklee234

For v7.7 beta 9, there is still problem for CAPsMAN. I used beta 9 in CAPsMAN and the other APs used v7.6 I can see SSIDs up and AP all connected to CAPsMAN. However, after sometimes, wifi login failed. Seems authentication parts or others problem. Wired connection is ok. I revert the CAPsMAN back t...

cklee234

support for Intel I226 eth controller
Excited.

Let me try at the weekend

yes, it supports intel i225

cklee234

*) x86 - improved igc driver support;
What has included in igc driver?
support for Intel I226 eth controller

Excited.

Let me try at the weekend

cklee234

Yes, so you currently have to choose between your x86 device supporting local wireless interfaces vs. it being able to act as a CAPsMAN for wifiwave2 CAP devices. In many cases the x86 devices are actually CHRs and a CHR cannot have wireless interfaces to begin with, so installing the wifiwave2 pac...

cklee234

Just to clarify WifiWave2 package released for other architectures is solely meant for CAPsMAN usage.

You mean for CAPsMan to control CAP device installed with wifiwave2?

But installing wifiwave2 in x86 will disable the existing local wireless device, but add the menu for wifiwave2

cklee234

in 7.7 beta 9, the CAPsMan issues still resolved in x86. *) wifiwave2 - released packages for MMIPS, PPC, TILE and x86; What kinds of wireless cards supported in x86? my R11e-5HacT disappears after adding wifiwave2 package but anyway it still not working in x86 *) x86 - improved igc driver support; ...

cklee234

May need to look at what changes in beta 6 and beta 8 affecting the stability of CAPsMan

cklee234

Previous issues on CAPSMan with start and stop behaviours remain since v7.7beta 6 and 8. Seems it is related to 5G part but anyway the CAPsMan

cklee234

Finaly solved thanks for nothing Mikrotik

Really, what was the fix?

cklee234

Could it be related to different versions in the CAPsMan and AP? AP is using V7.6

cklee234

Just can't recover the password from support portal

I wish to raise a support ticket on CAPsMan issue in V7.7 beta6

cklee234

I continue to have issues to login portal

cklee234

Not aware it is possible

cklee234

I have issues with CAPsMan since v7.7 beta 4 that force me to back to v7.6.
After installed the beta 4 and 6, my 5G wifi parts stopped working. 2.4G wifi remained ok.
I saw reloading of CAPsMan from time to time.

Not sure if this happened in x86 only but reverting beta to v7.6 resumes normal

cklee234

Have you tried the official mikrotik support channel.
https://mikrotik.com/support
or via email : support@mikrotik.com

Yes, they replied me with a support ticket and to wait for their fixes

cklee234

So far not working

I set is AP mode, wifi scan found the SSID but unable to connect. Frequency scan all - 130db

cklee234

I just tried to upgrade an x86 from 6.49.5,6,7 (Yes tried on clones on all three) Upon reboot they will post but not boot. These was clones of one of my x86 core routers seeing as none worked I will be holding off on the x86 upgrade and staying on ver 6 until this test passes. As I seem to have the...

cklee234

keep asking Mikrotik to include the support

cklee234

Also still no support for intelligent i225-V ethernet interface

Looking forward to have this in upcoming beta

cklee234

Encountered issues in CAPsMan
No 5G wireless in the AP
Reverted back to 7.6 ok

cklee234

*) x86 - improved ixgbe driver support;

Can you elaborate on the improved support? What included and added?

cklee234

The support said it would be fixed. But so far, only "no support channels issue" has been fixed. still not yet able to connect to wifi device and works

Likely the driver is not fully activated

cklee234

Can you share with me where you got the AR9300?

I have been using the mikrotik branded R11e-5HacT which is still not working

cklee234

did you try?

or have tested it out

cklee234

Is there any progress oir test showing support for i225?

How about the newer one i226?

I found another mini PC with 6 2.5G NIC and Celeron J6412 CPU
If i225 or i226 is supported, it would be very good

cklee234

Is there any progress oir test showing support for i225?

How about the newer one i226?

cklee234

What's new in 7.6beta6 (2022-Sep-07 12:06):

*) container - added "start-on-boot" parameter for automatic container startup;

how to enable this option - container - added "start-on-boot"

command line?

Got it from the help wiki.
Can add to the existing running docker

cklee234

What's new in 7.6beta6 (2022-Sep-07 12:06):

*) container - added "start-on-boot" parameter for automatic container startup;

how to enable this option - container - added "start-on-boot"

command line?

cklee234

for example a shell command to interact the docker image after it strarts Yes, the subcommands of "/container" are underdocumented on the help site. Until their doc people get around to filling that out, use the CLI to discover the commands by poking around with F1 and TAB keystrokes. Fro...

cklee234

for example a shell command to interact the docker image after it strarts

cklee234

Is it possible to have more help on how to use CMD in container and how to interact with other containers?

cklee234

Thanks for the update on this *) wireless - fixed interface initialization on x86 devices; There is no error now but seems not yet working. scan frequency is ok but does not discover other APs which are next to it. Let me do more testings later The fix was tested with our R11 series wireless cards....

cklee234

Thanks for the update on this
*) wireless - fixed interface initialization on x86 devices;

There is no error now but seems not yet working. scan frequency is ok but does not discover other APs which are next to it.

Let me do more testings later

cklee234

Would like to ask if there is working example to use guacamole in routeros container.

I am not sure how to set up the pgsql container image to work with other guacamole images

cklee234

tun/tap support will be added in next release. Anything else to consider adding before stable release?

Could you allow systemd to work inside container?

cklee234

I use netwatch to monitor the container up and running after I confirm the container configuration works and it runs well

cklee234

I am able to build my debian based asterisk and migrate the existing SIP setting to the docker. It works without issues.

cklee234

May I know if V7 has x86 wifi driver included?

cklee234

unifi ? Herectics! I have successfully launched unifi controller 4 name="04277978-29d8-4d06-be1c-1899207bbc54" tag="jacobalberty/unifi:latest" os="linux" arch="amd64" interface=veth3 root-dir=disk1/unifi mounts=unifi_data,unfi_log dns="" hostname=&q...

cklee234

Thank for the good works. Any chance to build a x86 image? Finally make it work FROM debian:bullseye-slim RUN \ apt-get update && \ apt-get install --no-install-recommends --yes openssh-server && \ echo "PermitRootLogin yes" >> /etc/ssh/sshd_config RUN mkdir /run/sshd RUN ...

cklee234

Thank for the good works.

Any chance to build a x86 image?

I try to build a Debian x86 docker image but it never gets start in routers

cklee234

I see, my mistake

cklee234

Thank for the good works.

Any chance to build a x86 image?

cklee234

@cklee234 Tap the Advanced mode button. The Scan List window appears. Check which list is selected there. You can create your own Scan List and select it. I have manually added the scanlist and it appears in the scan list. Unfortunately, it does not work upon trying one by one. Besides, it should b...

cklee234

I am using an x86 and install an MikroTik R11e-5HacT
Always no supported channel

Screenshot 2022-06-19 at 8.52.28 AM.png

cklee234

Assuming you are not using wifiwave2 From terminal /interface wireless info country-info=<chosen country> For wifiwave2 /interface/wifiwave2/info country-info=<chosen country> It will show which channels etc are allowed for the selected country. Omit country-info parameter to get all countries. For...

cklee234

Have seen that a couple of times. In my case it was each time a mismatch between country setting and channel to be used Ros7 is a lot more strict on that. Can you check country setting and if the allowed channels for that setting are compatible with what you want to use ? Could you elaborate more? ...

cklee234

I wish to know how to fix it.

After upgrade to v7, I found my wireless card has the following red error
-- no supported channel
-- scan-list does not contain valid channels
-- empty scanlist

How should I upload the scanlist?

cklee234

Interesting, after upgrade to 7.1, all the channels say latest are 7.1. No more 6.49.1

cklee234

I could not find container package from the release in mipsbe , x86/chr version

cklee234

my mistake
now it's working

Thanks !

Is it possible to post your working configuration for learning?
Thanks

cklee234

My x86 could be upgraded from beta 2 to beta 3. However, I could not able to login from the winbox via lan ip or Mac address. After I hook up the hdmi cable to check the console message, I am able to login via console. internally seems working. The wan side login but not lan ip login via winbox is o...

cklee234

I saw this from the beginning that v7 "removed individual packages, only bundle and extra packages will remain" For x86, I could find user-manager, tr069-client, gps and calea. I wonder will other packages be added to extra? Will KVM package be available in the future? I am interested to b...

Search found 67 matches