yes, i'm agree with kadhol too

yes i'm bridging vlan and vap to one birge but not in my client. do I also must make vlan,wlan and ether1 into one bridge at my client routerboard. I have tried use AP generic at client like senao with mode bridge and succeed. but when I replace it with RB client will never connected

this my configuration http://www.modupload.com/images/14m8nve1qm3ljy5aa8ff.jpg IP ON MAIN ROUTER ether2=192..168.0.254 vlan1=192.168.2.2 vlan2=192.168.3.2 IP ON RB ether1=192.168.0.252 vlan1=192.168.2.1 vlan2=192.168.3.1 wlan1 10.0.1.1/24 wlan2 10.0.2.2/24 wlan3 10.0.3.3/24 note: vlan1 for sharing P...

I had one RB600 and one routerOS in DOM as main router . but now I always fail when tried entered inside RB600 from Neighbour Viewer or winbox. in Neighbour Viewer mac from RB600 and main router could be seen. but not any could in access from mac telnet. I only could access main router from winbox B...

I just upgrade routerOS to version 3.10, but I lose some packages like routing (RIP,FILTER,OSPF,BGP) . why can like that.
I use DOM level 4

this my secreen shoot

do you mean like this?? root@asraf-proxy:/etc/squid# tail -f /var/log/squid/access.log 1211508391.972 0 202.152.19.0 TCP_MISS/403 1522 POST http://guest2.meebo.org/mm?1211508399343588 - NONE/- text/html 1211508392.752 0 202.152.19.0 TCP_MISS/403 1470 GET http://yahoo.com/ - NONE/- text/html 12115083...

I remain not to can connect to internet this my configuration in mikrotik and my squid.conf ip mikrotik 202.152.19.59/29 ip Proxy server 202.152.19.60/29 NAT in mikrotik chain=dstnat action=redirect to-ports=3128 src-address=!202.152.19.60 in-interface=ether2 dst-port=80 protocol=tcp my squid.conf h...

This MY Topology http://www.modupload.com/images/a5y7orvrvwybvim5lcs.jpg I have made NAT redirect to Proxy server In Mikrotik. and I also have made transparent mode, acl allow mikrotik src ( mikrotik IP ) in squid.conf, but why my client can't browsing. this secreen shoot my browser http://www.modup...

Hello
If I thing that I'm undestanding, you forget to insert the max limit and Limit at, like in the next picture

queue tree.jpg

Well I hope it help you
Rafael Lore

hii bro, i'm newbie. can u give me script/mangle like this picture