What happen if you put a Gbit switch between? Just to see if the switch can get at 1 Gbit link. So I tested with a gigabit switch, and it didn't work. (some cheap tp link) I also set 2 bridge ports on the IPS router (the one they gave to me), and used it as a gigabit switch - the HAP links at 1gbps...

[admin@MikroTik] > /interface ethernet monitor ether1 once name: ether1 status: no-link auto-negotiation: done advertising: 10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full This is what I get with no cable plugged on ether1

Is that what you asked for? [admin@MikroTik] > /interface ethernet cable-test ether1 once name: ether1 status: link-ok Regarding advertising - it is set on Auto Negotiation. If i uncheck this and try to force it to link 1gbps, it fails. About ehter3 - this is my PC. It seems that it connects only on...

Thanks both for the input. I am confused. You state you have a 300Mbps connection from your ISP but are not happy that you are getting a 1gigbit link?? OR are you saying that with the hapac2 you have been only getting between 75-300Mbps on a 1 Gig link from the ISP?? I will assume its the latter. Ce...

Hello! I have the MikroTik HAP AC2. Since now, I had 75mbps from my ISP, which is now increased to 300mbps. However, the HAP fails to link at 1Gbps. My installation is pretty simple, there are built in cables in the building, where I live, and I don't use any other switches, the inbound cable goes d...

Yes, make sure you connect to 5 GHz (you might use a different SSID for WLAN2). Use "onlyAC" . Set the frequency yourselves (no auto) Check Wireless Registration table for RX/TXrate, must be something like "867Mbps-80MHz/2S/SG" bpwl , many thanks for the detailed explanation. So...

Thanks everybody! I performed configuration reset, and it seems to work now. What I find strange, is that I'm getting 867 only when I place my laptop right next to the router. Otherwise the speed varies significantly. Below I'm sending my current setup and NAS Drive read/write speeds (laptop placed ...

Thank you both for the replies.
I'll check later today the router setup and I will post my feedback.

Hello! I'm using the MikroTik HAP AC2, latest available stable OS, default settings for 5Ghz Wifi Network. Unfortunately, I'm only getting 300 mbps connection, instead of 867 mbps - see attachment. Over LAN i get 1 Gbps. My Laptop WiFi supports 1gbps network over wifi (Lenovo Ideapad 5, wifi adapter...