JODA58, can you please tell me what is you Mikrotik model and what is a CPU load during download of big file over Wireguard?

Ok, so in that case it will be: /routing table add fib name=via-wg /routing/rule/add src-address=192.168.88.200/32 action=lookup table=via-wg /ip firewall nat add action=masquerade chain=srcnat out-interface=10.13.13.3 // my local wireguard IP /ip route add gateway=10.13.13.1@main routing-table=via-...

Did you set Wireguard interface IP? So The first question to the community is how to know that the Mikrotik router is connected to the VPN server? Try to ping (from Mikrotik) other side of VPN using internal wireguard IP - in my case remote (VPN) side is 10.13.13.1, my local side (Mikrotik) is 10.13...

Ok, so I was able to make it run: /routing table add fib name=via-wg /ip firewall mangle add action=mark-routing chain=prerouting src-address=192.168.88.200 new-routing-mark=via-wg /ip firewall nat add action=masquerade chain=srcnat out-interface=10.13.13.3 // my local wireguard IP /ip route add gat...

v7.1 b 2 is so unstable, I'm considering returning the whole device. Selling hardware with software that is not capable of the even most basic operations - holy moly. Every trunk-image of Openwrt has been more stable in the past. Are you aware of fact, that this software is b eta, not stable releas...

Hello, I'm trying to route all traffic for one lan IP over Wireguard. I'm just a little confused, because there was some changes related to routing etc. I have working wireguard interface, I can ping it from Mikrotik, or from my local PC (I added masquerade, in order to use wireguard server as DNS s...