Help! What firewall rule(s) do I need in order to ping backwards through my network??? (I know this is a poorly worded question) I am trying to discover the devices on my network. When I installed the Dude to the remote PC (100.0.0.15) I can see all the devices on my network and I can ping from (100...

I have a quick question. I am trying to initially configure/discover all the devices on my network in the Dude. When I installed the Dude on the client PC (Reinert) everything is found but I can't get the Dude to discover all the devices from a PC on my local network. Why can I ping RouterB in Winbo...

Okay, I've been trying to figure this one out for a while now and I just wanted to see if I could get any hints. I am trying to send/recieve a DHCP request/response to a DHCP server across my network. The DHCP server is connected to the ether1 interface of the RouterOS PC http://i38.photobucket.com/...

Thank you Normis and Hulk. If it wasn't for the tremendous support I get through this forum I probably would have quit using this product long ago. I hope I can repay the favor one day. Also, I did the new tests and now I'm even more disappointed. At a glance could you tell me if these are typical r...

Recently I used Winbox's (Bandwidth Test) tool to try to find any bottlenecks in my network. I attached a picture of the results I got. My question is why is the PC running RouterOS sending/receiving so much faster than the other devices? Do I have something misconfigured?

SurferTim,
Thanks for the suggestion!! I ended up resetting all the devices on my network then I re-entered all the routes until everything was back up and running. I will keep your suggestion in mind next time I am troubleshooting

Hi, I was wondering if someone could help me. I am unable to traceroute a domain name (google.com) using WinBox. I attached a pic of my config, I am trying to use OpenDNS's DNS server (208.67.222.222). I am able to traceroute to the DNS server I configurated (208.67.222.222) but not a domain name. H...

Hi, I am excited that I have finally established a 90m PTP link and now I would like to monitor it with the Dude. I am easily able to Discover all the devices attached to the Ether interface but I am unable to monitor the Wlan interface. (I am a Mikrotik newbie so I probably missing a simple configu...

hytanium, if you still have a couple SR9's left, lmk. skeller47[at]gmail[dot]com

Hi, With all due respect, if this is the wrong thread for this question will somebody please suggest where I could post this question. Since there are quite a few WISP operators on this board, I thought this would be a good place to ask. I was wondering if someone could suggest an 900 Mhz antenna fo...

Normis, thanks for your help. I finally got it working properly after upgrading to RouterOS 3.9 and following the guide while verifying each step. I am just getting acquainted with Mikrotik and I'm loving it just about as much as I am hating it (which is a good thing). This forum has answered many q...

JJCinAZ, thanks for replying. I tried what you suggested and that part is now working properly. I appreciate you taking the time to help. I started a new thread detailing my latest problem. Feel free to jump in!

http://forum.mikrotik.com/viewtopic.php?f=7&t=24161

I was wondering if someone could help me out. I am trying to configure an RB 133/c to route traffic to and from the AP shown below. The steps I took to configure the RB 133/c are listed here: http://forum.mikrotik.com/viewtopic.php?f=7&t=24130 While using Winbox I can easily connect to the AP an...

Mikrotik experts, I was wondering if you could give me a hand setting up a RB 133/c. I am trying to establish a hotspot that will provide internet access to my friend living down the street. Below I attached a picture of the equipment I am trying to configure. I have an x86 box running RouterOS (Lev...

I wouldn't ask a dumb question on purpose. So if I am, feel free to patronize me all you want. :) I am trying to establish the maximum wireless throughput of an AP. (Wrt54G/DD-WRTv24micro) I have the AP between a RouterOS box and a node. I used the MT Bandwidth Monitor - Tx:15Mbps Rx:7Mbps Is it pos...

woo-hoo! It worked, I am so glad. Thanks for pulling me through this one!

I have a simple problem that I cannot solve, so I turn to you guys. Your troubleshooting advice will be glorified for eternity. What I would like to accomplish: Properly configure a RADIUS server to work with my AP. http://www.marlwifi.org.nz/projects/basic-mt-hotspot Here is the tutorial I followed...

kaluba,
You are a god among men.