Any help guys..

HI, I tried your way but failed. I'm also at mistake. Actually the IP as per below Modem IP (192.168.0.1) Modem web interface IP (10.5.5.10) NOT: (192.168.0.5) > Mikrotik IP (assign by modem DHCP 192.168.0.20) connected to port 1 in mikrotik >Lan PC1 connected to mikrotik with IP (192.168.50.40) con...

Modem IP (192.168.0.1) Modem web interface IP (192.168.0.5) > Mikrotik IP (assign by modem DHCP 192.168.0.20) connected to port 1 in mikrotik >Lan PC1 connected to mikrotik with IP (192.168.50.40) connected to port 2 in mikrotik i have tried bridge port 1 and 3 If I manually configure pc ip address(...

hi, anyone have any ideas? I'm really stuck at this problem

Hi,
Yes, all working fine except for the modem interface.

All is working except the modem interface, right?

Hi, It is not Starlink and mikrotik is not in default. I've configured it with some firewall rules. I'm using mikrotik rb3011 series. The firewall rules basically only allow 1ip of email server. The rules are working fine. port1 - connected to modem line port2-8 - connected to lan with ip 192.168.50...

hi, Thanks for the advice. I'm quite new to mikrotik, can you give me guidance on how to achieve the steps you recommended? Basically, I want to be able to key in the ip 192.168.0.5 on the browser of pc 192.168.50.40 and i'll be able to access the web interface on the modem. The reason this modem ha...

Hi all, I'm try to access my modem web interface via LAN PC. Below are the connection details Modem IP (192.168.0.1) Modem web interface IP (192.168.0.5) > Mikrotik IP (assign by modem DHCP 192.168.0.20) >Lan PC1 connected to mikrotik with IP (192.168.50.40) What configurations should I do so than m...

No one can help me?

Hi all, Can anyone assist me on the below issue? 1. When user manager is running with hotspot users connected, the 'Bad blocks' in the resources windows seems to be increasing. In 2hours time, it increase from 5% to 20%++. It will eventually increase to 99%++ and the router watchdog will force reboo...

Hi pe1chl,
I've tried your settings, the problem is occur. What else should I try? Thanks in advance.

It is unlikely that the MikroTik router is involved in this timing. Maybe you need to add TCP MSS clamping: /ip firewall mangle add action=change-mss chain=forward new-mss=clamp-to-pmtu passthrough=yes \ protocol=tcp tcp-flags=syn Hi, Thank for the advice. Will try the settings above and let you kn...

Hi All,
Any guide to trouble shoot? Please help.

Hi All, Please help me on my outlook issue on mikrotik. Firstly, I would like to explain the situation. 1. When my internet line from home connect to mikrotik router, my outlook works fine. I could send email with attachment, download new mail with attachment OK. 2. When my internet line connect fro...

Hi, I've tested this script and it is working as what I needed. But I would to make some amendments to it. How do I only allow winbox (port 8291) to passthrough instead for disabling the whole interface? The reason for this is I want to remotely connect to it if the remote site decided to topup the ...

Hi Eguun, Manage to debug the script. Mistake was with the names. Btw, this script does not save the counter value to file right? If the router is rebooted, the counters will be back to zero. Any idea how to resolve this? Thanks for you advice. Okay, at this stage, it's worth you ensuring the Nat &a...

Hi Eguun, I manage to add script as per your advice. It manage to run but the logs don't show the comments in the script. I'm not sure what I'm doing wrong. Anyway, below are my router environment. ether1 : wan connection ether2 : hotspot connection ether3 : hotspot connection ether4 : lan connectio...

Hi Eguun, Thanks a lot for the clarification. Appreciate your assistance. Will try tonight. :) Hi, Well the content of the script should be pasted into a blank script into System> Scripts You'll need to give this script a name a suggestion would be wan2DisableNatOnVolumeExcess Once you have saved yo...

Hi, Sorry for your trouble. I'm new to mikrotik. I manage to add in firewall filter and the Nat to routerOs. I'm currently stuck with the wan2DisableNatOnVolumeExcess script. Where should I paste the command? or should I save it to a text file and run from some command in routeros? Any guide is much...