What does this fix?

*) tile - improved system stability;

Is it about using PPPOE-CLIENT with the cable port, causing intermittent UP/DOWN of all ports?

Hello everyone, In the v7 version, in bgp, for the next hop of the received route redirection, only one next hop can be set (set gw XXX). How to set multiple? /routing filter rule add chain=bgp-in disabled=no rule="set gw ether1";accept /routing bgp connection add as=65530 disabled=no inpu...

Thanks for your suggestion.
I tried increasing the mq pfifo to 4000+, but the rx errors still increase.
Before this, mq pfifo only solved the problem of tx queue drops.

I have same problem, bare metal with mikrotik installed use 82599 and two ports bonding to huawei6730. In mikrotik, one port get rx error a lot, another port had fewer rx errors. no error in huawei6730 switch. When I disable the port with many rx errors, all the error packets will go to another port...

The same problem occurred in the early morning of the 29th, Shanghai time zone. v7 versions of 1009 and 1036 had kernel errors, after downgrading to v6 version everything works fine.
BTW, all platforms such as mips, arm, and x86 had no issues, and it seems that there is only a problem with the tile.