MikroTik

Sahafi2001

The description is a bit vague, but I assume you actually ask two separate questions: how to make a VPN client running on the router always use a particular uplink how to make only particular LAN side clients use a particular VPN client to access a particular site Is my understanding correct? If ye...

Sahafi2001

Hello

How do I set up the router

5 internet lines have been load balanced and I have 2 VPN services set up for specific sites added in the address list.

What I want is

VPN use would be on a specific line and not everyone, also I want any connection to this line to be via VPN

Sahafi2001

Why there is not a long-term on v7?
if i upgraded my router from 6.48.6 long term to 7.3.1, Is there any problem that effect user-manger and hotspot

Sahafi2001

Try to do like this

/interface bridge port
add bridge=bridge interface=ether12
/interface bridge vlan
add bridge=bridge tagged=ether12 vlan-ids=100
/ip address
add address=10.10.0.9/24 interface=ether12 network=10.10.0.0
;

Sahafi2001

Hello I have a router CCR1009-8G-1S-1S+ Update 6.48.6 long-term As shown below, I would like to make sure is the processor temperature good? For the record, it works for 22 hours when reading and does not have to be severely stressed, “the processor is medium pressure 1%.” Should I change the CPU co...

Sahafi2001

To be clear with you I run a public internet and use my Nanostation M2 to stream the internet to users purchasing accounts and logging in via the hotspot page. Recently, many tools have spread that help bypass and hack the router and use the Internet for free, either through injection or proxy, whic...

Sahafi2001

Good luck with the pile of crap you have...... troubleshooting that will be a nightmare......

Is there a problem with my configurations?

Sahafi2001

Saha post your config for review, one cannot efficiently parse little bits without seeing it in context of the config......... /export hide-sensitive file=anynameyouwish l /ip firewall address-list add address=10.50.0.0/24 list=AP add address=10.50.0.0/16 list=Network add address=172.16.0.0/12 list...

Sahafi2001

So "First firewall" to start, then move to advanced. The thing is that the "basic firewall" section in the manual refers to "default firewall rules" but duplicates some of them, and also the "advanced firewall" section duplicates some of the rules given in th...

Sahafi2001

Your device did not come with a default preset firewall, correct ? Like a house: first you build the base, then you put on the subsequent floors. So "First firewall" to start, then move to advanced. i do it but now this is show in log "invalid forward: in:VLAN1 out:pppoe-1, src-mac a...

Sahafi2001

Hi. I have a question I'd like you to answer. I've set up "Building Advanced Firewall" for Mikrotik 1009-8G-1-1+ long term version 6.48.6. The question is, am I supposed to do "Building Your First Firewall" and then "Building Advanced Firewall" or don't I have to do it?...

Sahafi2001

You cannot! Your ISP can do it depending upon the kind of business class services they provide and it will be very expensive. (note will also take some configutation changes on the router) You can combine 4 lines on Mikrotik routers but this is for a. the purpose of redundancy, but this is ONLY val...

Sahafi2001

Adding to this... if you have one connection which would require 5Mb, you're already stuck. You can saturate 1 stream of 4Mb but not beyond since that connection can not be cut in pieces. If however you have 4 connections of (let's say) 3Mb, you can send them each onto one line, that should theoret...

Sahafi2001

It's quite unique to have 4 ADSL lines in 2021. Most xDSL users is at least on VDSL2 or something similar.

You cannot combine the bandwidth, just split the load among the four pipes. Maximum speed will be 4Mbps at best.

I understand now..so how do I distribute the loads?

Sahafi2001

I have 4 adsl lines, the speed of each line is 4 megabytes, and I want to combine the four so that the speed becomes 16 megabytes, and I want to integrate them into the Mikrotik 1100AHx4 router because the maximum speed of the service provider is 4 megabytes, so how do I do that? To be clear.. I wan...

Sahafi2001

As to the low performance: you might want to run sniffer to see if router imposes some delay. The other thing to check is actual ethernet port speed (execute /interface ethernet monitor LAN once and verify that actual rate is as expected/wanted. Thank you so much but if you don't mind.. Could you s...

Sahafi2001

Which problems exactly are you facing? Without knowing them we're just shooting in the dark. One thing that doesn't seem right is MAC address assigned to bridge OUT, which is not valid localy administered MAC address . As to the rest of VLAN-specific config: since ether2 is the only port member of ...

Sahafi2001

We use hotspot for users and we broadcast the Internet through ubnt devices, but after the latest updates we face several problems # oct/20/2021 22:15:35 by RouterOS 6.48.5 RB1100AHx4 Dude Edition /interface bridge add admin-mac=00:00:00:00:00:01 auto-mac=no dhcp-snooping=yes name=OUT /interface eth...

Sahafi2001

Always Broadcast respond to requests with a broadcast instead of unicast.
This can be helpful to diagnostics, and dhcp snooping. Though I've found that many devices don't. accept broadcast responses, AND it causes more "noise" on the LAN.
- IntrusDave -

is that what you after?

yes

Sahafi2001

why you have ticked always broadcast?

Do I stop it and how do I prevent hackers from knowing the Mac of the devices in the network

Sahafi2001

A client may not accept a lease offered from a DHCP server for various reasons ... So, are you getting this error all the time? Is it related to a specific client ? You just ask for a solution without giving any information about the network at all ( topology, configuration setup etc. ... ) Yes, mo...

Sahafi2001

I 've seen this error in many networks, i won't consider it as a problem if it doesn't appear often or if it is not related to a very specific client...

So what's the solution?

Sahafi2001

Yes you can!

https://googlethatforyou.com?q=how%20to ... 20mikrotik

Nice move.

Sahafi2001

For the past few months I've been getting messages in logs like this APV101 offering lease 172.11.x.xx for 38:30:F9:xx:xx:xx without success This is a picture of the DHCP settings https://i.ibb.co/y4ZgS6C/Whats-App-Image-2021-10-05-at-11-39-53-AM-1.jpg System version v6.47.10 [long-term] firmware ve...

Sahafi2001

Mikrotik server is used to manage an open network such as restaurants or hotels, but with subscriptions using hotspots and user manager Is this useful
I am unfamiliar with MT servers, can you point me to a products page?

I'm sorry, I meant router

Sahafi2001

home: power outages = UPS, no more worries. Business: power outages = better UPS no more worries. Business: Longer term power outages = better UPS + generator Avoiding proper use of functionality is a temporary excuse the first time it happens, next time be prepared. If you don't mind sir but there...

Sahafi2001

Login to what? Why is normal user anywhere near a login attempt?? Is this for an open server? With such sparse details, one cant make much of the post. Mikrotik router is used to manage an open network such as restaurants or hotels, but with subscriptions using hotspots and user manager Is this use...

Sahafi2001

The problem is not the button, (or the position of the button) the problem is the use: use user-manager or other RADIUS service, and this can't happen. Use the hotspot / users only if the users are really a few... User Manager problem is database corruption all the time, especially in connection wi...

Sahafi2001

Why did this message appear? And how can I protect the router? Buffer: memory Message: anonymous user tried to log in, but no guests are allowed https://scontent.fsah1-1.fna.fbcdn.net/v/t1.6435-9/242403359_1954715638021657_1698854170921987683_n.jpg?_nc_cat=102&ccb=1-5&_nc_sid=825194&_nc_...

Sahafi2001

HELP! Mikrotik router is accessible from outside but there are no rules to allow the same. How is this possible? Network description: So we have a PPOE modem connection from ISP with a Public IP assigned to us. When you browse the public IP, the mikrotik page shows up. How do i remove this from the...

Sahafi2001

What is the second symbol from the left (xX:xx:xx:xx:xx:xx) of the address you are trying to set?

Number 3

Sahafi2001

Good evening, I want to change the MAC address of the router, but I can't. I tried the following commands, but to no avail /interface ethernet set ether1 mac-address=33:10:C6:72:29:EB This is what appears to me [*******@********] > inter eth pr Flags: X - disabled, R - running, S - slave # NAME MTU ...

Sahafi2001

Thank you for your efforts and cooperation
I contacted a well-known programmer and he did hack protection, I'm not sure how it works, but I think he blocked port 80 and 67 and they worked if the hotspot page was logged in

Sahafi2001

The problem is that this application bypasses the page and connects to the Internet without logging in.. If so, it is the "first case" in my discussion above - your firewall rules for users who haven't succesfully completed the login quest are not tight enough. How is that done - using Mi...

Sahafi2001

The problem is that this application bypasses the page and connects to the Internet without logging in.. If so, it is the "first case" in my discussion above - your firewall rules for users who haven't succesfully completed the login quest are not tight enough. How is that done - using Mi...

Sahafi2001

My network is programmed so that whoever wants to access the Internet must buy a card and log in through this page*.. The problem is that this application bypasses the page and connects to the Internet without logging in.. During each month I lose more than 50 dollars as a result of this hack becaus...

Sahafi2001

https://scontent.fsah1-1.fna.fbcdn.net/v/t39.30808-6/236176431_637287254300586_7885267307630339598_n.jpg?_nc_cat=106&ccb=1-5&_nc_sid=825194&_nc_ohc=IazI221n3qAAX_q7ZWv&_nc_ht=scontent.fsah1-1.fna&oh=786225d8d405581439d195e6f5b85ab1&oe=611FC4B5 Is there a solution to prevent ...

Sahafi2001

Good evening
Today I noticed that the Telegram application can only receive message notifications without the need to log into the router via the hotspot page. Is there a solution to this problem

Sahafi2001

If you have one public internet IP-adress then you have to do a "portforward" for e.g port tcp/80 and 443 to the IIS-server. Example: /ip firewall nat add action=dst-nat chain=dstnat dst-port=80 in-interface-list=WAN log=yes protocol=tcp to-addresses=192.168.1.20 Thank you sir. Now i chan...

Sahafi2001

I wanted to create a website through the IIS service from Windows, but I could not publish it on the Internet
Do you have any idea how to do this?
I have 1009-8G router

Sahafi2001

I guess I'm not the only person talking about this troublesome magic button.😡 https://scontent.fsah1-1.fna.fbcdn.net/v/t1.6435-9/171760985_555819665780679_1318727317882025340_n.jpg?_nc_cat=105&ccb=1-3&_nc_sid=825194&_nc_ohc=trWRwAvf614AX9rjAyS&_nc_ht=scontent.fsah1-1.fna&oh=94fbd...

Search found 41 matches