It works.

Thanks!

Hi,

How can exclude any messages with "hotspot" topic from log ?

I have also error, info, debug topics with hotspot in that message. I want to exclude only that messages related to hotspot and to see everything else with those topics (error, info, debug)...

Any help ?

RPS was always turned on. No change in load under ROS 5.14.

frankie
RPS has helped you?
It has become better?

Thanks for info frankie.

normis,

thats ok but why cannot select which process using which CPU ? I mean, why i.e. queuing or firewall is not processing by CPU which have less load ?

frankie,

No, conn. tracking is OFF. I see that you have same situation even with only 2 ether i-faces. Did you try to update to 5.14?

DobroFenix,

Maybe you have some loops in network, do /tool torch to found out that

Hi, RB1100AHx2, ROS 5.13, latest firmware. About 300/40mbit of traffic and I have very big usage of only one CPU. First 10 ports bridged, ether13 using as uplink. Even, in /profile, it some CPU load on firewall but I don't have ANY filter, nat or mangle rule. Is there any way to make usages of CPUs ...

sadeghrafie,

pppoe-client remains connected but no default route when I do MAC telnet to SXT from AP and see routes in ip route table.
Yes, add default route is checked.

Hi to all, I have problem with disappearing dinamic default route on SXT. It's happening randomly, after few hours and after few days...no rule. SXT works in client (station) mode, connected via pppoe-client to AP. On various version of ROS (5.x) is same problem. Anyone with same siptoms ?! Of cours...

Nice to hear that. Thanks again.

Hello, just to ask MikroTIK team why the default config of OmniTIK is same as on RB750 (cannot access ROS via ether1 because no neighbor and ip on this port and firewall rules block access) ?! That's don't make any sense because in RB750 case you have router on the desk and it's easy to put lan cabl...

Interference is on TX side (where air rate is 300Mbps), probably caused by another radio on same board/box.

Turn off default forward on APs.

RK, It was great chatting with you and I hope you enjoy the script. It was thoughtful of you to pay for the work and then let the community benefit from it freely. If you or anyone else should have a need for advanced MT scripting and design, please do not hesitate to call on me! -John INSTALLATION...

NV2 link, 22km, site A: RB800/R52n-M/ROS 5.0/ site B: RB433AH/R52n-M/ROS 5.0, signal is ~ -60 on both chains and after a while (2 days in this case) uptime of link, traffic stops but iface is still running with same signal and TX/RX rates (130/130). After disable and enable iface, everything works a...

Nothing at all, i tryed to change speed settings (10/100/1000, FD/HD) on eth interface on PC, still nothing
Is there any chance to boot up RB800 via CF card with instaled ROS (for powerpc) on it ? And how to install ROS which is not for x86 on CF anyway ?!

It's only file you can upload to the router via serial port - *.fwf but can't use it for reinstall ROS

I can't because eth1 is broken and it's impossible do netinstall over other 2 ethernet ports...

So, RB800 stay beeping for a while when he power up. He made first beep ok and when he should beep twice and finish booting, he stays on beeping (pretty fast beeping) for a minut and reboot himself. After reboot, it's same thing again. Connected to serial port , I got this in console: ______________...

COELPL, any news from you about this problem ?

like he said, disable your "memory" rules first, then see if it happens Normis, I not have any memory rules... My loggin export: [admin@hotspot] /system logging> export ... /system logging action set memory memory-lines=100 memory-stop-on-full=no name=memory target=memory set disk disk-fi...

It's same ROS version/equipment on both clients ? We have same problem, Mikrotik, 5G, omni antenna and ~10 clients connected. Clients that have NanoStation 5 works fine with good ccq in both sides (with or w/out active traffic). Others, that have MT have very poor and unstable ccq and rx rate, in sa...

Try to swap R52H with R5H (if you need little more dB) or use old good CM9.
We have some long links with R52H and have same problems until changing radio cards.

Problem with PPPoE is in RouterOS version which is not RC (release candidate). If you (I) use 3.0rc9 for example, on RB333/600, pppoe never freeze and everything works fine. Ok, try to upgrade it to 3.13 - pppoe die. I tried to do same thing (put 3.0rc9) on RB433 but not working on this board, only ...

yes omni antenna, at 10 dbi.

Is an abnormal situation after some time the MINI PCI-stops working on arrangements and has a low gain.

ThX

I try CM9, R52(H), some TP-LINKs...all lose power on omni, only WLM54(A)G (Compex) card works fine. Try that one...

Omni antenna on R52H ?

Yes, I try drag and drop and same thing.
Yes, version of .npk is correct, for rb100 series (same for rb500 too)

Hi, I can't upgrade RB112 (ROS 2.9.24) to 2.9.50. When I put new package (.npk) in files directory on RB and do reboot, system won't stand up. After switching POE off and turn on again, old ROS is running. I try this on another 112 and same thing is happening, even when I try to downgrade to oldest ...

Of course the Windows machine can freeze only due to a bug in software drivers. If we could find out why, we could make a workaround. Did you try upgrading to 3.1? There is a fix for other client wireless issues. I also think that the problem is not in ROS but how can else explain? Everyone use sam...

Hi, I have AP with RB333 and 3 miniPCI on it. 2 Compex WLM54G for clients and 1 R52 for link. Clients are connected trough 2 sectors (120 degree each) and ALL clients have same equipment (D-Link PCI card, 20db grid antenna). Some of them works fine and never disconnect and some have problem that com...

Hi to all, I have 65km 5.8 GHz link between two cities. Each side has 32dbi parabolic antenna, 532A, Compex miniPCI 200mW. Thats all works fine at ~ -65-70dbm but sometimes i have very large floating of signal. It happends that link works fine for 5 days at -65 and than start to going down to -80, -...