I got it working by putting the vlan for passthrough on the ether1 instead of the bridge. the management vlan still on the bridge. Not sure why that fixed anything. I guess I can try the turning off ingress filtering. As for the MTU. My ping was pretty high and I looked around it seems my cell provi...

I'm having the same issue as the person above. My Vlan 3 interface is getting an IP address 10.x and it's also attaching one to my dhcp client on the other router I have. I have passthrough going lte1 --> Vlan3. A dhcp server is automatically brought up when doing so. No traffic flows to lte1 though...

6.48.3

Again - Any help is appreciated. Is there just some silent understanding that this doesn't work? It seems other posts keep getting replies but all of my questions go unanswered. Is there something I need to do to get some feedback/help?

Thanks.

Any help is appreciated. I've stumpled along so far. Management vlan is up and running and my other router receives it's IP address from the mikrotik but as soon as I enable LTE passthrough, connection through the unit is gone. /interface lte set [ find ] mtu=1470 name=lte1 /interface bridge add ing...

I've enabled the DHCP client for the management vlan (which isnt any special vlan it's just a vlan number I created). I added it to the LAN interface list... Is there anything else I'm missing? I see the MAC address on the switch tree and it's tagged correctly. However, It's not grabbing an IP addre...

Got any recommendations of other companies that have a dish booster like the lte-us? I'm at a loss here as well and the only thread here that seems to have any direction has photos of the setup that contradict what the person says to do. They say to make the VLAN under the ether interface but their ...

To configure the Passthrough on ether1: [admin@MikroTik] > /interface lte apn add apn=apn1 passthrough-interface=ether1 [admin@MikroTik] > /interface lte set lte1 apn-profiles=apn1 ^^^ apn1? Isnt that already added as "default"? This is what I have already admin@MikroTik] > /interface lte ...

Soooooo I cant seem to figure this out in a concise way. Every post I see seems to have people giving information for different scenarios that are not the same. The instructions are like use the gui then use cli but do it like this and in no particular order... Is there anyway I can find a guide/wal...