Here is my default answer to user who like to access their router from a remote site. My response to that is to use VPN. And if VPN can not be used or you have no clue or possibility to set it up, I do recommend: 1. Use another port than default. 2. Use port knocking. This prevents someone from see...

So it is just saying Registration Status "Denied" because I am not able to see a cell tower anymore?

Wouldn't it just say searching?

No I did not set anything fixed.

I am not understanding what you mean by "moved between radio"? Could you explain?

The connection is not good enough. I live in the USA and my company bought the wrong routerboard with it. To my understanding the R11e-4G uses bands 3, 7, 20, 31, 41n, 42, and 43. Only band 41 is used in the US as Sprint and I do not have that near me. When I have the R11e-4g routerboard in it, it l...

But it has worked before and works every once in a while?

Does that mean it is just on my SIM provider?

I have switched SIMs and it is doing the same thing, but I have about 30 SIMs in use right now and none of the rest are doing this.

RouterOS version is 6.43.3. I have not had good enough connection to upgrade to latest 6.48.

I am not sure where to find RouterBOOT version.

I have an LHGR with an LTE6 routerboard inside of it. I recently had it working just fine and I unplugged it and tried the next week to use it again and it was saying registration status denied. It almost seemed like it was not able to find any signal although I never moved it or changed configurati...

I am trying to use a RBSXTR that came with a R11e-4G routerboard in it and works fine. When I try to put a R11e-LTE6 routerboard in it, it keeps saying Functionality is minimum and will not keep the APN profile or any of the network settings I have in there. I have attached the picture of where the ...

Okay, thanks for the advice.

Is it possible to use the MikroTik App to remotely login to the MikroTik? I have used it using LAN inside the network, but have not tried it using the WAN IP address?

I am trying to remotely access my RBLHGR&R11e-LTE-US MikroTik via the WAN IP address of the mikrotik in Winbox, but it is not working. I have created the firewall rule to allow port 8291 to accept all traffic using an old forum page. /ip firewall filter add action=accept chain=input disabled=no ...

I tried to create the firewall rule using the instructions: IP -> Firewall -> Filter Rules -> Add new action = accept protocol = tcp chain = input dst-port = 8291 I also placed it at the top of my firewall rules list, but still Winbox will not remote into my MikroRik using the WAN IP address. Anythi...

create an Input rule to allow Port 8291 from the internet. /ip firewall filter add action=accept chain=input disabled=no dst-port=8291 protocol=tcp be sure to place it above any rules dropping Input. I would also consider specifying which hosts can connect rather than leaving it wide open. I just f...