As discussed sharing the network diagram

Nothing in the configuration explains why the mere presence of the routes with routing-mark should affect forwarding between 172.13.0.0/16 and 172.14.0.0/16.

Did it work before the upgrade to 6.48.4?

Attaching Network Diagram for more clarity please review

Nothing in the configuration explains why the mere presence of the routes with routing-mark should affect forwarding between 172.13.0.0/16 and 172.14.0.0/16.

Did it work before the upgrade to 6.48.4?

Not tried on the previous version shall i downgrade ? . Further for more clarity i am drawing the network diagram for all the network site . Nothing in the configuration explains why the mere presence of the routes with routing-mark should affect forwarding between 172.13.0.0/16 and 172.14.0.0/16. D...

yes correct the marked routes which are enabled and My far end is basically the network on 172.14.0.0/16,172.14.0.0/16 these mikrtotik devices don't get the response 172.13.2.1/24,172.13.3.1/24. as soon i active the route with mark routes entry the static routing stop working. Please let me know whi...

Yes i could not elaborate previously thank you for understanding yes same is happening as soon i active the route with mark routes entry the static routing stop working. Please let me know which config to be changed . It's not "static routing versus PBR". It's rather "static routing w...

Thank you for guiding for the next post will take care about the instruction you gave further the ip scheme which i am using is for Point to Point Interfaces if it is not recommended please advice which scheme to be used. For the connection marking should i use prerouting and then use connection mar...

Currently i am facing the same issue i have multiple site on which i have done static routing with the mikrotik router but when i do the PBR for 2 WAN far end cannot reach the 172.13.2.1/24,172.13.3.1/24 only the accessible ip series is 172.13.1.1/24 . If PBR work then static routing stop if static ...

Currently i am facing the same issue i have multiple site on which i have done static routing with the mikrotik router but when i do the PBR for 2 WAN far end cannot reach the 172.13.2.1/24,172.13.3.1/24 only the accessible ip series is 172.13.1.1/24 . If PBR work then static routing stop if static ...

Dear i am facing the same issue with PCC posting my configuration if someone can help /interface ethernet set [ find default-name=ether1 ] comment="WAN " set [ find default-name=ether2 ] comment="LAN " set [ find default-name=ether3 ] comment="Wireless LAN" set [ find d...