The same, while using OpenVPN:

In case switch did not learn mapping between dst MAC and switch port, or dst MAC is broadcast MAC address, then unmanged switch will transmit those frames through all ports. Dooh! That's too bad, in this case it's totally bad idea to put VLANs via unmanaged switch. Seems to increase whole LAN data ...

Another option is to get an MT router with more ports and use the hex as a managed switch ........ However that is far more expensive than just getting a basic managed 5 port switch. Yes, I've just been wonder, if my hardcore-configuration is possible using my devices only. Additional MT or managed...

Get rid of the unmanaged switch and replace it with a managed switch and all is possible, also suggest that you get APs that are designed to read vlan tags and not spend money on wifi routers. EAP 245 by TPLINK comes to mind. OK, I think I will work with LANS with managed switches :-) Thank you @an...

Is this identifying vlan100 on ether5 that the wifi router is providing DHCP service for?? If so why are you setting dhcp server for it etc.......... it should be done on the H router?? Not really. I'd like to do such easy VLAN configuration: vlan100.jpg Now I want create VLAN100 network (RED) for ...

I am not certain and the question is worded in such a way not to be clear, or its clear as mud!! Now it looks fine (sorru for using images...): 1.JPG 2.JPG I'd like to define VLAN on Huawei, but then Huawei don't ger IP adress from MT DHCP 3.JPG 4.JPG Try configure VLAN on MT that way: 5.JPG 6.JPG

I think you will be chasing your tail trying to get that to work then... Yep, I've messing a little bit :-) Maybe other way: now I have ether5(DHCP server)<->(DHCP clinet)router working. Router has VLAN ability. Is there a way to build such configuration: ether5(DHCP server, VLAN)<->(DHCP clinet, V...

Too bad, I cannot find a full user manual for this router? Only useless quick start guide. Did you get a manual on a CD for example?? I think there is no detailed manual, only Quick start with "hey, guy, just plug in and play". Only one thing about VLAN is "If you need to configure V...

This beautiful white monster LOL.
https://consumer.huawei.com/en/routers/ax3-quad-core/ ??

Almost, dual core. Bought for WiFi6 + gigabit + looks nice. I hate black spider-like routers with 176494 antennas

Which wifi router? Model Number? A wifi router can be turned into an AP switch but most consumer models then lose their ability for routing and vlans. If that is the case then you would have to use your wifi device as a router and then the question becomes, is the consumer device able to accept vla...

Yes, that is the beauty of vlans. They are required when you need to send more than one subnet through a port. I'd like to love VLANs :-) Changed my configuration a little bit. To unmanaged switch I can connect a kind of "device", which have ability to define their VLAN. I can conect WiFi...

Just looking at it quickly ascertained you need another port or a managed switch!. You cannot separate users on the subnet attached to ether5. They are all on the same LAN. You should separate users and IOT devices into two different ports and subnets!! "add comment="NO internet access&qu...

Yikes what did you do LOL....... Great Scott! Yoy're great :-) Thanks for help! LAN rules idea is now such: MT_LAN.jpg and my configuration is such (is OK now?): # aug/31/2021 19:32:47 by RouterOS 6.48.4 # software id = ICTI-3408 # # model = RB750Gr3 # serial number = XXXXX /interface list add comm...

None at all, but in terms of learning, a. its really cool to see that you setup your network without vlans and without the use of bridge. OK :-) First step: no VLANs, no bridge. My setup without VLANS looks now: # aug/30/2021 20:37:55 by RouterOS 6.48.4 # software id = ICTI-3408 # # model = RB750Gr...

Again, if the diagram is your stated method of showing us your requirments why are you farting around with vlans? Maybe it is stupid, but there is two reasons: 1. Most important - I'd like to know how VLANs works. I've build few small networks/servers, but I never had the need VLANs. Now I have MT ...

The config you posted has nothing to do with bridge vlan-filtering which is nicely explained by tutorial I mentioned in my previous post. Trying to understand bridges and VLANs... Is this have more sense? /interface bridge add name=BR1 protocol-mode=none vlan-filtering=no /interface bridge port add...

You sure can keep bridge and use VLANs for port separation. If you haven't already, have a look at this tutorial . What is special in your case is that only single physical port will be untagged member of corresponding VLAN while bridge interface will be tagged member of all VLANs. Thank you very m...

If you'll have exactly as per your diagram, i.e. one LAN per port, each port different LAN, then you don't need VLANs at all. Simply remove all ports from bridge (then remove bridge), set appropriate IP address to each physical port and you're done. Add DHCP servers to interfaces you need (or confi...

Thank you for quick support! I've read "Using RouterOS to VLAN your network" but something goes wrong and lost my MT access, so must reset it. Now works fine, beginner problems :-) My idea is such: MT_LAN.jpg MT is connected to server which offer 192.168.0.50 via DHCP. I'd like to attach d...

Hello! I'm new here, so, please, be tender :-) I have MT hEX router with (almost) default configuration. Want to do such: 1. on every ether ports (2-5) different VLANs (vlan_2 on ether_2 and so on) 2. want to offer on DHCP server different addresses for different ether/VLAN. For example 192.168.2.X ...