Hello. I need replace very old AP (TL-WA500G -WiFi g), which has connected some directional look-like external antena and placed in almost corner of steel hall for an authorized car service use (diagnose, programming firmwares...). It is about 360m2 (18mx20m) and old AP was doing good but in about 1...

This documents not talking about my case and i don't sure what should i do about this ports working as access -more than one in VLAN 10. So if i make separate interface vlan like this (because i cant add more ports than one): /interface vlan add interface=ether3 name=vlan10-3 vlan-id=10 add interfac...

Hello. Please help me understand what and why need to change/remove/add to this config: Router-Switch-AP (all in one) I need to make VLAN on chip instead of cpu VLAN on RB3011 UiAS-RM where using this as router+switch without any WLAN and other managed switch with only access ports like this: ether1...

It was not working so i tested both variants. Router1 (OVPN Server): [admin@MikroTik] > ip firewall filter print Flags: X - disabled, I - invalid; D - dynamic 0 D ;;; special dummy rule to show fasttrack counters chain=forward action=passthrough 1 chain=forward action=accept src-address=192.168.1.0/...

Not working: [admin@MikroTik] > ping 192.168.0.149 SEQ HOST SIZE TTL TIME STATUS 0 192.168.0.149 timeout 1 192.168.0.149 timeout 2 192.168.0.149 timeout 0 D ;;; special dummy rule to show fasttrack counters chain=forward action=passthrough 1 chain=forward action=accept src-address=192.168.0.0/24 dst...

Maybe you have right, but i don't see any place where i'm using /30 or /32 for this virtual network. This subnet is created automatically when putting src snd dst address in secret configuration i think. Like i said in first post i can ping: PC1 192.168.1.150 -> VPN end 172.22.22.2 and Router2 LAN i...

Both has correct routes then. I see everywhere on forum here and others identical problems like mine but there no solution or solution provided there are not working for me. Tried proxy-arp for bridge, tried other variants for masquerade, firewall with all filters disabled (as far as i know, disable...

It's seasm like you have a OVPN connected but you not used it. If you plan go to internet via this OVPN tunnel then you should create a rule like: https://i.imgur.com/OM0qy2I.png and you plan connect to other network then just Dst.Address: Put Your Destination address. I tried with things like 192....

Hello! I have problems with geting OpenVPN tunel site to site to work on 2x Chateau LTE12. Tunnel is connecting when for ie. making it with this tutorial: https://systemzone.net/mikrotik-site-to-site-openvpn-server-setup-routeros-client/ After doing everything from this instruction without "Bas...

OVPN Server and PPPoE Scan are no longer visible in the Winbox PPP menu (using Winbox 3.29 in WINE on Ubuntu, I haven't tried 3.28). I have 2x Chateau LTE12 and fighting with site to site OpenVPN for few days, yesterday i was happy because after RC1 and RC2, whole reset, OVPN was starting to work (...