hello, i did what you said. it is still not let anything over the vpn. its really odd to me becouse i have set one up before and it just worked.

Hello, im trying to set up a site to site over wiregard. I can ping both router but i cant ping computers or servers. i dont think i miss anything but i put the config in here. if someone can take a look and let me know or got any pointers.

ok what need to be done is the core router has a /24 that will go over a private fiber (rented form comcast ) to the office that is 50 miles around. The 2 office needs to use the /24 for servers there. what is the best way of doing this still Vpls?

hello, im trying to get a full routing table form comcast on v7 we got a session going and it shows its working but im not getting any route in the list. there is no filters set yet, just trying to pull the whole table down. 1 name="comcast full route" remote.address=68.86.80.89/32 local.a...

Hello im playing around in a lab. what im trying to do is have a /24 on the Core router (ccr2004) on sfp port 1 with the ip of 200.33.32.1/32. on the same router i have a bridge set up on sfp port 3-6 to pass the rest of the /24 too. Router 2 (ccr2004) sfp port 1 is plugged in to router 1 on sfp por...

Hello this may be easy ? but our isp give use a ip to use on our router 50.231.92.xx/30. and we set that to our ccr2004, They give use 50.221.144.xx/29 and 50.231.91.xx/30 and told me that 50.231.92.xx/30 will be our gateway (CCR2004). how can i set this up to pass the ip to servers. the CCR is has ...

yes, sorry i was on my phone. What they are planning on doing is taking the new building and making it part of the old network. All servers will be at the old school. Comcast sold them this Line to the new school over fiber. There will be no internet at the new school everything has to come back ove...

I would like to use encrypt. This is for a small school, They have a main building and just got a 2 building down the road. they have a comcast 1 gb fiber EPL to each. They want to send all traffic over this and internet.

so this is what they have told me, its a 1gb full duplex with layer 2 (MTU) heeds to 1600-9100, un-tagged standard frame and CoS.

hello,

Has anyone ever set up a Ethernet Virtual Private Line with 2 routers. We have have two ccr2004 with a 1gb EVPL that need set up. can this be done? and if so how would you set it up with the vlan

trying to upgrade a CHR, is anyone getting this too?

@MikroTik] /system package update> download
channel: upgrade
installed-version: 6.49.2
latest-version: 7.1
status: calculating download size..

been like this for hours

that is fine, but we need to be able to get to the 25.222.15.121/29 router and set up port forwarding to two other server useing the 25.222.15.121/29. 25.222.15.146/29 (edge router/gateway) ------------------------- 25.222.15.121/29(rack router) -----------------email (192.168.1.20 | |--------------...

have done that but when we do a whats my ip 25.222.15.146/29 and not 25.222.15.121/29

Hello, this may be a easy question, we got fiber dropped off the other day, they told us that we need one router as our gateway 25.222.15.146/29, our main router has a ip of 25.222.15.121/29 and a server with 25.222.15.122/29. what is the best way to set up up the gateway router just pass to 121 and...

i put the line in for fast track but i,, still not getting anything. can i take fast track out?

thanks

Did you compare your rules to those of the presentations from the previous post?

yes i did, they did it with one ether vs bridge/vlans. so i dont know if there is something that need to be changed for that.

Anyone good at mangle, i cant see what i did wrong, It a bridge with vlans on one port. maybe i am missing something.

hello, i went back and set up PCC and have had no luck, i can ping out of the router when one of the wans is turned on but as soon as i turn on the the other everything stops working. they keep showing it with one lan port but i need it to so on all vlans, so i trying to set it up with just the ethe...

Anav, thanks a. what subnets/vlans are supposed to use as WANIP outbound all vlan need to out to the wan b. what the role of the ISP wan connections is supposed to be (which is primary which is back up which is fixed for some lans to use etc.............) then that can be figured out and the manglin...

Thanks Anav, yes we have 3 ip address poinging to ISP3 bc we have a block of 5 and all 5 of them come in to the router on that ISP. All the Wan ports will have more then one ip address to them. The core switch passes all the wans connections to ether1 what is a 40gb fiber ports The Management pool w...

ok i will do that.

Hello, Looking for a recommendation on a setup? We are trying to replace a cisco router that we cant log into anymore. the site has 2 wans with 2 more coming soon. 1 wan is 1gb and the other is a 2gb with the other two being 2gb we hope(they are setting them up). The wans go into a switch and get vl...

Thank you for your import. I did a little drawing of what we are trying to do. They have a old Cisco router that we are trying to replace. any help or anything would be great thanks

# sep/20/2021 19:00:20 by RouterOS 6.47.9 # software id = # # # /interface bridge add name=Lan /interface ethernet set [ find default-name=ether1 ] disable-running-check=no set [ find default-name=ether2 ] advertise=10000M-full disable-running-check=\ no set [ find default-name=ether3 ] disable-runn...

(1) Where is IP address of ISP 2,4? ISP 2 and 4 are not setup yet. they are still being installed. (2) Understand you have FIVE vlans on the LAN and one bridge that is also providing DHCP for ethernet2. (3) Dont have a clue how you are getting WAN IPs....... but it seems intriguing. all wan ip are c...

hello, I cant ping between vlans. im just trying to ping. I have put the conf file here. out home network is on 192.168.1.1 but we need to get to the CCTV network. thanks # sep/12/2021 02:36:10 by RouterOS 6.47.9 # software id = # # # /interface bridge add name=Lan /interface ethernet set [ find def...