I will have another look this weekend time permitting!! ah thanx man. im also stil browsing for viable guide to try. because cant really find the time to disconnect the internet to try it with my wife n children using it. and stil trying to find whats the difference of my script with amirsalehalavi...

I know it's been almost a year since you asked this question, but in case anyone like me was wondering, here's how I got it to work in RoterOS v7.4: /routing table add disabled=no fib name=out_through_WAN1 add disabled=no fib name=out_through_WAN2 /ip route add disabled=no distance=1 dst-address=0....

well after much thought i finally bought the hex s. wanted to try 1 last time if its the routeros7 that is different from the 6. n thanxfully i managed to make it work with the guide from youtube which i cant get it to work with routeros7 even with the same config. so i guess i just need to keep the...

is there any1 that has a working setting for routeros 7 with dual wan pppoe setup with loadbalancing and failover that works? if there, can they share the setup here please?
thanx.

Looks good, but sorry out of ideas.
A fresh look at this may be best from another poster.........

no worries. thanx for the help. i stil think its the iproute thingy. i read about giving the pppoe client a local address at 8.8.8.8 network but cant really grasped the concept or howto.

HAHA you blew the mangling copy.................... The only thing you have correct is the first two lines. The rest was not changed to what I had recommended. Can lead a horse to water................. /ip firewall mangle add action=accept chain=prerouting in-interface=pppoe-out1 add action=accept...

No you have to wait for stable 7.05. but the firmware included in the rb5009ug is the 7.0.5 stable? here is my complete setting again. thanx for the help. # jan/02/1970 00:49:41 by RouterOS 7.0.5 # software id = 4J4D-MAIY # # model = RB5009UG+S+ # serial number = /interface bridge add name=bridge-L...

i already aply the changes as so.. /ip firewall mangle add action=accept chain=prerouting in-interface=pppoe-out1 add action=accept chain=prerouting in-interface=pppoe-out2 add action=mark-connection chain=prerouting connection-mark=no-mark \ in-interface=pppoe-out1 new-connection-mark=wan1_conn pas...

does the mangle missing this 4 step? add chain=prerouting in-interface=pppoe-out1 connection-mark=no-mark action=mark-connection \ new-connection-mark=wan1_conn add chain=prerouting in-interface=pppoe-out2 connection-mark=no-mark action=mark-connection \ new-connection-mark=wan2_conn add chain=outpu...

thanx for the reply. yes i could set it up if just 1 pppoe. either wan1 or wan2. but its another story for both wan. im trying to do load balance using source adrress with failover this is my setting. # jan/02/1970 00:26:36 by RouterOS 7.0.5 # software id = 4J4D-MAIY # # model = RB5009UG+S+ # serial...

hm any1 got a working setup for dual wan pppoe in routeros7 that i can look up? specially the iproute part. because from all the guide i see for dual wan pppoe setup which is for routeros6 the ip route section is where i failed. i got unreachable at that part.

greetings.. i'm new to this mikrotik thing. just purchase a RB5009UG router (thinking its a good investment for future upgrade) replacing my old tenda w20e router. for load balancing n port forwarding. the old tenda is easy to configure. just plug it change the wan n enter credential n then im good ...