7.16 Blew out my 2.4 GHz Wifi configurations and channel. Only Seeing 5 GHz on RB4011iGS+5HacQ2HnD. Anyone seeing this issue?

Wifi is spotty, means what? Does it disconnect, or is slow? During this time, make a supout.rif file and send to support. Frequent disconnects from the different WiFi SSIDs that I have available using VLAN segration. This never used to happen on this magnitude before upgrading to ROS 7.15.2. I am h...

Since applying v7.15.2 my wifi is very spotty and it was working quite fine before this upgrade. My wifi wave2 configurations were all wiped out. When will this be fixed and there is definitely an issue with this release. Has anyone had a similiar issue. I am currently using a hAP ax³. Feedback woul...

I have been using Zerotier as recommendation from Mikrotik and I find it very easy to setup and use.

https://help.mikrotik.com/docs/display/ROS/ZeroTier

https://docs.zerotier.com/mikrotik/

https://www.zerotier.com/download/

Cheers

Hi, I have setup OpenVPN on Mikrotik Router. I am able to connect but unable to access LAN devices and the internet. See copy openvpn client configuration below: vpn pool - 192.168.34.0/24 Router local ip: 192.168.100.1 2 VLANS - 10.0.10.0/24 and 10.0.20.0/24 client dev tun remote 75.4.211.120 1194 ...

See images of NAT configuration below:

With the passthru from the ISP router/modem the public ip is transposed or passed to the Mikrotik Router in bridged mode you are correct Now when I had the RB4011iGS+5HacQ2HnD-IN the setup was the same and I was able to connect externally to my Raspberry pi using a dst-nat. Just that the Raspberry P...

Hello All, Recently installed a MikroTik HAP AX3 as a temporary replacement for my MikroTik RB4011iGS+5HacQ2HnD-IN which is a beast and I love it. I had to send it in for repairs some of the antennas got damaged. Hopefully I am not having a "buyers remorse with this router - HAP AX3. So long an...

Thank you but what about tweaking this one viewtopic.php?t=182276 namely the Router-Switch AP.

I just purchased a Mikrotik HAP ax3 and would like to use WifiWave2 with VLANs. I would like to have the 2.4 GHz on a separate VLAN say 10.0.10.x/24 and similarly the 5 GHZ on its own VLAN on a 10.0.20.x/24 with Guest network on 10.0.30.x/24. Any ideas as to how to start. The country setup is for US...

Unfortunately I live in a HOA so I have no option of choosing another ISP. After tweaking the frequency setting for the 5 GHz I was able to get 150 on the Wireless when connected on the wireless and when hard wired to the router I get 400 Mbps. I post my configuration for that change shortly.

I have been using the Mikrotik routers since 2017 my first being a RB750Gr3 and now I have a RB4011iGS+5HacQ2HnD. I have an ISP 1 Gbps Fiber to the Home internet connection which is shared however when I am hard wired to the router I get 500 Mbps Up and 700 Mbps download which is understood and acce...